Kramer 617T Manual de usuario

Installation Instructions

MODELS:

617T, 617R

4K HDR HDMI Tx/Rx over Extended-Reach

Multi-Mode Fiber Optic Cable

SAFETY WARNING

Disconnect the unit from the power supply before opening and servicing

For the latest information on our products and a list of Kramer distributors, visit our Web site where

updates to this user manual may befound.

We welcome your questions, comments, andfeedback.

www.KramerAV.com

info@KramerAV.com

P/N:

2900-301021

Rev:

617T, 617R 4K HDR HDMI Tx/Rx over Extended-Reach Multi-Mode Fiber

Optic Cable

Congratulations on purchasing your Kramer 617T and 617R Plug and Play active 4K HDR HDMI

Tx/Rx over Extended-Reach Multi-Mode (MM) Fiber Optic cable. 617T and 617R extend signals of up

to 4096x2160 @60Hz (4:4:4), over a distance of up to 200m (656ft) without signal scaling or data

compression, providing a maximum data rate of 18Gbps. 617T and 617R are easily and securely

connected via a 2LC fiber connector and can be powered from the USB connector. Alternatively, 617T

only can be powered from the HDMI interface (pin #18).

Figure 1: 617T Transmitter and 617R Receiver

Safety

Caution:

There are no operator serviceable parts inside the unit.

Warning:

Disconnect the power and unplug the unit from the wall before installing.

Warning:

Avoid direct eye exposure into the optic connectors when powered,

although this product is regulated strictly enough to operate under the

Laser Class 3R for eye safety.

See www.KramerAV.com for updated safety information.

Installation

To install 617T and 617R:

1. Unpack the contents of the package with care.

We recommend that you save the original box and packaging materials for possible future

shipment.

2. Turn on the power to the HDMI source (for example, a laptop) and acceptor (for example, a

display).

3. Power the 617T and 617R:

•Connect the micro USB connector on each device to a USB cable (supplied).

•Connect the USB cable either to the wall-mount power adapter (supplied) and to the

mains, or to a USB port.

The POWER LED lights and the STATUS LED flashes three times.

Although 617T can be powered via pin #18 on the HDMI interface, we

recommend that you use the USB power adapter.

617R can only be powered via the USB power adapter.

4. Connect the two LC optical fibers between 617T and 617R.

Connect (A) to (A) and (B) to (B). Make sure that the duplex connectors are connected

properly.

The STATUS LED flashes.

Do not look directly into the LC connectors on the 617T (the transmitter side)

when it’s powered.

This product operates under LASER Class I, classified by CDRH/FDA for eye

safety.

We recommend that you avoid using intermediate cables or adapters. Using

them may affect the transmission quality.

5. Connect 617T to the HDMI connector on the source side and 617R on the acceptor side.

Make sure that the 617T is always connected to the source side and the

617R is connected to the acceptor side.

Once the system is connected the Status LEDs on both 617T and 617R flash.

Troubleshooting

If the display appears black:

•Check that the power source adapters are properly connected on both sides.

•Check that both HDMI connector heads are fully plugged into the devices.

•Check that the source and display devices are both switched on.

•Reset the system by disconnecting and then reconnecting the 617T or 617R, or by

disconnecting and then reconnecting the power adapters.

•Reboot the system.

If the image appears distorted and/or there is background noise:

•Go to the display properties and check the settings. Make sure that the resolution is set below

4096x2160 at a 60Hz refresh ratio to check if the graphic resolution is properly defined.

•Reset the system by disconnecting and then reconnecting the 617T or 617R, or by

disconnecting and then reconnecting the power adapters.

It is important to connect the devices correctly as marked: 617T to the source side and

617R to the acceptor side.

Specifications

Video

Max. Resolution

4K @60Hz 4:4:4 (4096x2160)

Data Rate

Maximum 6 Gbps per channel

Compliance

Supports HDMI 2.0, HDCP 2.2, EDID and CEC

Ports

617T (source end)

Male HDMI connector

617R (display end)

Male HDMI connector

617T (source end)

Micro USB (for power supply)

617R (display end)

Micro USB (for power supply)

Power

Via USB source

Via external source

From HDMI PIN #18 (617T only)

Consumption

<2.5W

Recommended

Cable

Structure

Dual Multi-mode OM3 (50/125um) glass fiber

Optical Connectors

Duplex LC connectors

Max. Fiber Cable Attenuation

(λ=850nm)

2.5dB/KM

Max. Skew

0.4ns

Max. Insertion Attenuation

0.5dB

Total Optical Attenuation

1dB max @ 656ft/200m extension

Maximum Length

200m (656ft)

Environmental

Conditions

Operating Temperature

0° to +50°C (32° to 122°F)

Storage Temperature

-30° to +70°C (-22° to 158°F)

Operating Humidity

0 to 85%

Standard

Compliance

EN 55032:2012/AC: 2013 (Class A),

EN 61000-3-2:2014, EN 61000-3-3:2013,

EN 55024:2010

FCC

CFR 47 part 15 SUBPART B Class B, Section

15.101

Environmental

RoHS (2011/65/ EU)

General

Net Dimensions (W, D, H), each

2.6cm x 7.2cm x 1.5cm

(1" x 2.8" x 0.6")

Shipping Dimensions (W, D, H)

19.3cm x 25.3cm x 62cm

(7.6" x 10" x 24.4")

Net Weight, each

0.12kg (0.3bs) approx.

Shipping Weight

1.48kg (3.3lbs) approx.

Accessories

Included

2 Micro USB to USB type-A cables, 2 Wall-mount

power adaptors

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Transmisor de Kramer

Kramer

Kramer TP-551N Manual de usuario

Kramer

Kramer SID-X2N Manual de instalación y operación

Kramer

Kramer TA Manual de usuario

Kramer

Kramer TP-121EDID Manual de usuario

Kramer

Kramer TP-580CT Manual de usuario

Kramer

Kramer VP-200XLT Manual de usuario

Kramer

Kramer PT-2UT/R-KIT Manual de usuario

Kramer

Kramer VP-200XLTHD Manual de usuario

Kramer

Kramer DigiTOOLS KW-11T Manual de usuario

Kramer

Kramer TP-551N Manual de usuario

Kramer

Kramer TP-112HD Manual de usuario

Kramer

Kramer 610R Manual de usuario

Kramer

Kramer TP-210 Manual de usuario

Kramer

Kramer 610T Manual de usuario

Kramer

Kramer SID-VGA Manual de usuario

Kramer

Kramer F-110 Manual de usuario

Kramer

Kramer WP-121 Manual de usuario

Kramer

Kramer TP-114 Manual de usuario

Kramer

Kramer VP-300THD Manual de usuario

Kramer

Kramer WP-110xl Manual de usuario

Kramer

Kramer TP-583Txr Manual de usuario

Kramer

Kramer TP-581T Manual de usuario

Kramer

Kramer VP-428H2 Manual de usuario

Kramer

Kramer SID-X1N Manual de usuario

Manuales populares de Transmisor de otras marcas

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manual del propietario

Honeywell

Honeywell 5816WMBR Manual de usuario

Kamstrup

Kamstrup READy MTU Instrucciones de funcionamiento

Omega

Omega ZW Series Manual de usuario

ABB

ABB Field 264H Guía

Alinco

Alinco DJ-V17T Manual de usuario

Dejero

Dejero EnGo 3x Manual de usuario

Rosemount

Rosemount 4600 Manual de usuario

Speaka Professional

Speaka Professional 2342740 Manual de usuario

trubomat

trubomat GAB 1000 Manual de usuario

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manual de usuario

Rondish

Rondish UT-11 Manual de usuario

MG 10JRE Manual de usuario

Burkert

Burkert 8177 Manual de usuario

Firetide

Firetide HotPort 3203 Manual

Tele Radio

Tele Radio T9-02 Manual de usuario

Rotronic

Rotronic HygroFlex HF3 Series Manual de usuario

Jamara

Jamara FCX6 Pro Tel Manual de usuario