HBM T22 Manual de usuario
Mounting Instructions | Montageanleitung
English Deutsch
T22
Hottinger Baldwin Messtechnik GmbH
Im Tiefen See 45
D-64239 Darmstadt
Tel. +49 6151 803-0
Fax +49 6151 803-9100
www.hbm.com
Mat.: 7-2001.2302
DVS: A2302-10.0 HBM: public
02.2018
EHottinger Baldwin Messtechnik GmbH.
Subject to modifications.
All product descriptions are for general information only.
They are not to be understood as a guarantee of quality or
durability.
Änderungen vorbehalten.
Alle Angaben beschreiben unsere Produkte in allgemeiner
Form. Sie stellen keine Beschaffenheits- oder Haltbarkeits
garantie dar.
Mounting Instructions | Montageanleitung
English Deutsch
T22
2A2302-10.0 HBM: public T22
English
1 Safety instructions 3........................................
2 Application 7...............................................
3 Mounting 8.................................................
3.1 Installation position 8.........................................
3.2 Installation options 8.........................................
3.3 Couplings 9.................................................
3.3.1 Mounting position with couplings 9.............................
3.3.2 Installation 9................................................
4 Electrical connection 11......................................
4.1 General information 11........................................
4.2 Connector plug 12............................................
4.3 Cable extension 13...........................................
4.4 Shielding design 14...........................................
5 Loading capacity 15.........................................
5.1 Measuring dynamic torque 15..................................
5.2 Speed limits 16...............................................
6 Torque display 17...........................................
7 Maintenance 17..............................................
8 Dimensions 18..............................................
9 Specifications 20............................................
10 Accessories 26..............................................
10.1 Accessories for the T22 26.....................................
10.2 Bellows couplings 27..........................................
10.2.1 Specifications bellows couplings 31.............................
Safety instructions
T22 A2302-10.0 HBM: public 3
1 Safety instructions
Designated use
The T22 torque transducer is used exclusively for torque measurement tasks,
and directly associated control and regulatory tasks. Use for any additional
purpose shall be deemed to be not as intended.
In the interests of safety, the transducer should only be operated as described
in the Operating Manual. It is also essential to comply with the legal and safety
requirements for the application concerned during use. The same applies to
the use of accessories.
The transducer is not a safety element within the meaning of its designated
use. Proper and safe operation of this transducer requires proper transporta
tion, correct storage, assembly and mounting, and careful operation.
General dangers of failing to follow the safety instructions
The transducer corresponds to the state of the art and is failsafe. The
transducer can give rise to remaining dangers if it is inappropriately installed
and operated by untrained personnel.
Everyone involved with mounting, starting up, maintaining, or repairing the
transducer must have read and understood the Operating Manual and in partic
ular the technical safety instructions.
Residual dangers
The scope of supply and performance of the transducer covers only a small
area of torque measurement technology. In addition, equipment planners,
installers and operators should plan, implement and respond to the safety
engineering considerations of torque measurement technology in such a way
as to minimize remaining dangers. On‐site regulations must be complied with
at all times. Reference must be made to remaining dangers connected with
torque measurement technology.
Safety instructions
4A2302-10.0 HBM: public T22
The following symbols are used in this Operating Manual to point out remaining
dangers:
DANGER
Maximum danger level
Warns of an imminently dangerous situation in which failure to comply with
safety requirements will result in death or serious physical injury.
WARNING
Dangerous situation
Warns of a potentially dangerous situation in which failure to comply with
safety requirements can result in death or serious physical injury.
CAUTION
Possibly dangerous situation
Warns of a potentially dangerous situation in which failure to comply with
safety requirements could result in damage to property or some form of
physical injury.
Symbols for application and disposal instructions, as well as useful information:
Notice
Means that important information about the product or its handling is being
provided.
CE mark
The CE mark enables the manufacturer to guarantee that
the product complies with the requirements of the relev
Safety instructions
T22 A2302-10.0 HBM: public 5
ant EC directives (the Declaration of Conformity can be
found at http://www.hbm.com/HBMdoc).
Statutory waste disposal mark
In accordance with national and local environmental pro
tection and material recovery and recycling regulations,
old devices that can no longer be used must be disposed
of separately and not with normal household garbage.
If you need more information about waste disposal,
please contact your local authorities or the dealer from
whom you purchased the product.
Conversions and modifications
The transducer must not be modified from the design or safety engineering
point of view except with our express agreement. Any modification shall
exclude all liability on our part for any damage resulting therefrom.
Qualified personnel
The transducer must only be installed and used by qualified personnel, strictly
in accordance with the specifications and with safety requirements and
regulations. It is also essential to comply with the legal and safety requirements
for the application concerned during use. The same applies to the use of
accessories.
Qualified personnel means persons entrusted with siting, mounting, starting up
and operating the product who possess the appropriate qualifications for their
function.
Accident prevention
According to the prevailing accident prevention regulations, once the torque
transducer has been mounted, a covering agent or cladding has to be fitted as
follows:
SThe cover or cladding must not be free to rotate.
SThe cover or cladding should avoid squeezing or shearing and provide
protection against parts that might come loose.
Safety instructions
6A2302-10.0 HBM: public T22
SCovers and cladding must be positioned at a suitable distance or be
arranged so that there is no access to any moving parts within.
SCovers and cladding must also be attached if the moving parts of the torque
transducer are installed outside peoples' movement and operating range.
The only permitted exceptions to the above requirements are if the various
parts and assemblies of the machine are already fully protected by the design
of the machine or by existing safety precautions.
Application
T22 A2302-10.0 HBM: public 7
2 Application
The T22 torque transducer measures static and dynamic torques on rotating or
stationary machine parts in any rotation direction.
Mounting
8A2302-10.0 HBM: public T22
3 Mounting
3.1 Installation position
The torque transducer can be installed with any orientation (see also
Chapter 3.3.1).
3.2 Installation options
CAUTION
The permitted load limits set out in the specifications (see Page 20) must be
complied with.
Side B
Drive side
Side A
Measuring side
Fig. 3.1 Installation options with couplings
Otros manuales para T22
1
Tabla de contenidos
Idiomas:
Otros manuales de Transductor de HBM
HBM
HBM S2M Series Manual de usuario
HBM
HBM T4A Manual de usuario
HBM
HBM P3MBP Manual de usuario
HBM
HBM Z16A Manual de usuario
HBM
HBM C16A Series Manual de usuario
HBM
HBM T40MS Manual de usuario
HBM
HBM Z8 Manual de usuario
HBM
HBM Z6R Series Manual de usuario
HBM
HBM T40B Manual de usuario
HBM
HBM C18 Manual de usuario
HBM
HBM T20WN Manual de usuario
HBM
HBM U5 Series Manual de usuario
HBM
HBM U9C Series Manual de usuario
HBM
HBM U2B Manual de usuario
HBM
HBM WI Series Manual de usuario
HBM
HBM U93 Manual de usuario
HBM
HBM T22 Manual de usuario
HBM
HBM TOP-Z30A Manual de usuario
HBM
HBM U5 Series Manual de usuario
HBM
HBM U3 Manual de usuario
Manuales populares de Transductor de otras marcas
Camille Bauer
Camille Bauer SINEAX F534 Manual de usuario
Trane
Trane KIT 16724 Instrucciones de montaje
Lumel
Lumel P18 Manual de usuario
B&C Speakers
B&C Speakers DE75PTN Manual de usuario
MAMAC SYSTEMS
MAMAC SYSTEMS PR-243 Manual
Mianyang Weibo Electronic
Mianyang Weibo Electronic WB Series Manual de usuario
