HBM PW15iA Manual de usuario

Mounting Instructions | Montageanleitung |

Notice de montage

English Deutsch Français

PW15iA

Hottinger Baldwin Messtechnik GmbH

Im Tiefen See 45

D-64239 Darmstadt

Tel. +49 6151 803-0

Fax +49 6151 803-9100

[email protected]

www.hbm.com

Mat.: 7-2002.4359

DVS: A4359-1.0 HBM: public

1.2016

EHottinger Baldwin Messtechnik GmbH.

Subject to modifications.

All product descriptions are for general information only.

They are not to be understood as a guarantee of quality or

durability.

Änderungen vorbehalten.

Alle Angaben beschreiben unsere Produkte in allgemeiner

Form. Sie stellen keine Beschaffenheits- oder Haltbarkeits

garantie dar.

Sous réserve de modifications.

Les caractéristiques indiquées ne décrivent nos produits

que sous une forme générale. Elles n'impliquent aucune

garantie de qualité ou de durablilité.

Mounting Instructions | Montageanleitung |

Notice de montage

English Deutsch Français

PW15iA

Digital Load Cell

2A4359-1.0 HBM: public PW15iA

English

1 Safety instructions 4........................................

2 Markings used 8............................................

2.1 Symbols on the transducer 8..................................

2.2 The markings used in this document 8..........................

3 Structure and mode of operation 10...........................

3.1 Layout 11....................................................

3.2 Signal conditioning 12.........................................

3.3 Adaptive interference suppression 13............................

3.4 Inputs and outputs 14.........................................

3.4.1 Trigger function 14............................................

3.4.2 Filling and dosing 15..........................................

3.4.3 Limit value function 15.........................................

3.4.4 Extreme value functions 15....................................

4 Conditions on site 16........................................

4.1 Protection against corrosion 16.................................

4.2 Deposits 17..................................................

5 Mechanical installation 18....................................

5.1 Important precautions during installation 18......................

5.2 Mounting and load application 19...............................

5.3 Dimensions 21...............................................

6 Electrical connection 22......................................

6.1 Cable laying 22...............................................

6.2 Pin assignment 22............................................

6.3 Supply voltage 24.............................................

6.4 Digital inputs 25..............................................

6.5 Digital outputs 26.............................................

PW15iA A4359-1.0 HBM: public 3

7 Interfaces 27................................................

7.1 RS‐485 4‐wire interfaces (UART) 27............................

7.2 CANopen interface 29.........................................

7.3 DeviceNet interface 30........................................

8 Operation via software 32....................................

9 Waste disposal and environmental protection 32..............

Safety instructions

4A4359-1.0 HBM: public PW15iA

1 Safety instructions

Appropriate use

Transducers of the PW15iA type series are designed

solely for technical weighing applications within the appli

cation limits detailed in the specifications. Any other use

is not appropriate.

Any person instructed to carry out installation, commis

sioning or operation of the transducer must have read

and understood the Operating Manual and in particular

the technical safety instructions.

In the interests of safety, the transducer should only be

operated by qualified personnel and as described in the

Operating Manual. It is also essential to comply with the

legal and safety requirements for the application con

cerned during use. The same applies to the use of

accessories.

The transducer is not intended for use as a safety com

ponent. Please also refer to the "Additional safety pre

cautions" section. Proper and safe operation requires

proper transportation, correct storage, siting and mount

ing, and careful operation.

Operating conditions

SPlease observe the allowed maximum values stated

in the specifications for:

- Limit load

- Limit load at max. eccentricity

- Limit lateral loading

- Breaking loads

- Temperature limits

Safety instructions

PW15iA A4359-1.0 HBM: public 5

- Limits of electrical loading capacity

SPlease note that when several transducers are

installed in a scale, there is not always an even distri

bution of load on the individual transducers.

SThe transducers can be used as machine elements.

When used in this manner, it must be noted that, to

favor greater sensitivity, the transducer is not

designed with the safety factors usual in mechanical

engineering.

SThe design or safety engineering of the transducer

must not be modified without our express permission.

SThe transducer is maintenance-free.

SIn accordance with national and local environmental

protection and material recovery and recycling regula

tions, old transducers that can no longer be used

must be disposed of separately and not with normal

household garbage, see Section 9, Page 32.

Qualified personnel

Qualified persons means persons entrusted with the

installation, fitting, commissioning and operation of the

product who possess the appropriate qualifications for

their function.

This includes people who meet at least one of the three

following requirements:

SKnowledge of the safety concepts of measurement

and automation technology is a requirement and as

project personnel, they must be familiar with these

concepts.

SAs measurement or automation plant operating per

sonnel, they have been instructed how to handle the

machinery. They are familiar with the operation of the

Safety instructions

6A4359-1.0 HBM: public PW15iA

equipment and technologies described in this docu

mentation.

SAs commissioning engineers or service engineers,

they have successfully completed the training to qual

ify them to repair the automation systems. They are

also authorized to activate, ground and label circuits

and equipment in accordance with safety engineering

standards.

Working safely

SThe transducer must not be directly connected to the

power supply system. The supply voltage must be

between 12 and 30VDC.

SError messages should only be acknowledged once

the cause of the error is removed and no further dan

ger exists.

SMaintenance and repair work on an open device with

the power on may only be carried out by trained per

sonnel who are aware of the dangers involved.

SAutomation equipment and devices must be designed

in such a way that adequate protection or locking

against unintentional actuation is provided (e.g.

access checks, password protection, etc.).

SFor those devices operating in networks, safety pre

cautions must be taken both in terms of hardware and

software, so that a line break or other interruptions to

signal transmission do not cause undefined states or

loss of data in the automation device.

SAfter making settings and carrying out activities that

are password-protected, ensure that any controls that

may be connected remain in a safe condition until the

switching performance of the device has been tested.

Safety instructions

PW15iA A4359-1.0 HBM: public 7

Additional safety precautions

Additional safety precautions to meet the requirements of

the relevant national and local accident prevention regu

lations must be taken in plants where malfunctions could

cause major damage, loss of data or even personal

injury.

The scope of supply and performance of the transducer

covers only a small area of measurement technology.

Before starting up the transducer in a system, a project

planning and risk analysis must first be implemented,

taking into account all the safety aspects of measure

ment and automation technology so that residual risks

are minimized. This particularly concerns personal and

machine protection. The transducers cannot implement

any safety-relevant cutoffs. In the event of a fault, the

relevant precautions must establish safe operating condi

tions.

General dangers of failing to follow the safety

instructions

The transducer corresponds to the state of the art and is

failsafe. The transducer may give rise to residual dangers

if it is inappropriately installed or operated.

Markings used

8A4359-1.0 HBM: public PW15iA

2 Markings used

2.1 Symbols on the transducer

CE mark

The CE mark enables the manufacturer to guarantee that

the product complies with the requirements of the rele

vant EC directives (the Declaration of Conformity can be

found on the HBM website (www.hbm.com) under

HBMdoc).

Statutory waste disposal mark

In accordance with national and local environmental pro

tection and material recovery and recycling regulations,

old devices that can no longer be used must be disposed

of separately and not with normal household garbage.

Also see Section9, Page 32.

2.2 The markings used in this document

Important instructions for your safety are specifically

identified. It is essential to follow these instructions in

order to prevent accidents and damage to property.

Symbol Significance

WARNING This marking warns of a potentially dangerous situa

tion in which failure to comply with safety require

ments can result in death or serious physical injury.

Notice This marking draws your attention to a situation in

which failure to comply with safety requirements can

lead to damage to property.

Tabla de contenidos

Idiomas:

Manuales populares de Transductor de otras marcas

Camille Bauer

Camille Bauer SINEAX F534 Manual de usuario

Trane

Trane KIT 16724 Instrucciones de montaje

Lumel

Lumel P18 Manual de usuario

B&C Speakers

B&C Speakers DE75PTN Manual de usuario

MAMAC SYSTEMS

MAMAC SYSTEMS PR-243 Manual

Mianyang Weibo Electronic

Mianyang Weibo Electronic WB Series Manual de usuario

ProMinent

ProMinent Dulcometer DMT Manual de usuario

MKS

MKS MicroPirani 925 Series Cómo utilizar

WIKA

WIKA WU-20 Manual de usuario

Alcatel Vacuum Technology

Alcatel Vacuum Technology BARATRON 622A Manual de usuario

Camille Bauer

Camille Bauer SIRAX CH-5610 Manual de usuario

WIKA

WIKA F2802 Manual de usuario

Veris Industries

Veris Industries PW Series Manual de usuario

Simrad

Simrad ES120-7C - REV D Guía del usuario

Airmar

Airmar M260 Manual de instrucciones

Spirax Sarco

Spirax Sarco ITV1030 Manual de usuario

halstrup-walcher

halstrup-walcher PU10 Manual de usuario

Balluff

Balluff BTL5-P Manual de usuario