HBM TN Manual de usuario
Mounting Instructions | Montageanleitung
English Deutsch
TN
Hottinger Baldwin Messtechnik GmbH
Im Tiefen See 45
D-64293 Darmstadt
Tel. +49 6151 803-0
Fax +49 6151 803-9100
www.hbm.com
Mat.: 7-2001.1639
DVS: A01639_02_X00_00 HBM: public
01.2019
EHottinger Baldwin Messtechnik GmbH.
Subject to modifications.
All product descriptions are for general information only.
They are not to be understood as a guarantee of quality or
durability.
Änderungen vorbehalten.
Alle Angaben beschreiben unsere Produkte in allgemeiner
Form. Sie stellen keine Beschaffenheits- oder Haltbarkeits
garantie dar.
Mounting Instructions | Montageanleitung
English Deutsch
TN
2A01639_02_X00_00 HBM: public TN
English
1 Safety instructions 4........................................
2 Markings used 6............................................
2.1 The markings used in this document 6..........................
2.2 Symbols on the product 7.....................................
3 Scope of supply 7..........................................
4 Application 8...............................................
5 Structure and mode of operation 9...........................
6 Installation 9...............................................
6.1 General notes on mounting 9..................................
6.2 Mbx and Mby bending moment auxiliary bridges 10................
6.3 Mounting position 12..........................................
6.4 Conditions on site 12..........................................
6.5 Adaptations 13...............................................
6.6 Mechanical installation 14......................................
6.6.1 Mounting sequence 15........................................
6.7 Loading capacity 16...........................................
7 Electrical connection 18......................................
7.1 General instructions 19........................................
7.2 Cabling instructions 19........................................
7.3 Recommendations for measuring mode 20.......................
TN A01639_02_X00_00 HBM: public 3
8 Maintenance 21..............................................
9 Options 21..................................................
10 Accessories 21..............................................
11 Specifications 22............................................
12 Dimensions 27..............................................
12.1 Nominal (rated) torque 100 N⋅m ... 5 kN⋅m27.....................
12.2 Nominal (rated) torque 10 N⋅m and 20 kN⋅m28...................
Safety instructions
4A01639_02_X00_00 HBM: public TN
1 Safety instructions
Use in accordance with the regulations
The TN Torque transfer standard may be used for torque measurement and
calibration tasks only. Use for any additional purpose shall be deemed to be
not in accordance with the regulations.
In the interests of safety, the transducer should only be operated as described
in the Mounting Instructions. It is also essential to observe the appropriate legal
and safety regulations for the application concerned during use. The same
applies to the use of accessories.
The transducer is not a safety element within the meaning of its use as
intended. Proper and safe operation of this transducer requires proper trans
portation, correct storage, assembly and mounting and careful operation.
General dangers of failing to follow the safety instructions
The transducer corresponds to the state of the art and is fail‐safe. The
transducer can give rise to remaining dangers if it is inappropriately installed
and operated by untrained personnel.
Everyone involved with the installation, commissioning, maintenance or repair
of the transducer must have read and understood the mounting instructions
and in particular the technical safety instructions.
Remaining dangers
The scope of supply and performance of the transducer covers only a small
area of torque measurement technology. In addition, equipment planners,
installers and operators should plan, implement and respond to the safety
engineering considerations of torque measurement technology in such a way
as to minimize remaining dangers. Prevailing regulations must be complied
with at all times. Reference must be made to remaining dangers connected
with torque measurement technology.
Safety instructions
TN A01639_02_X00_00 HBM: public 5
Conversions and modifications
HBM's express consent is required for modifications affecting the transducers's
design and safety. HBM does not take responsibility for damage resulting from
unauthorized modifications.
Qualified personnel
The transducer may be used by qualified personnel only; the specifications and
the special safety regulations need to be followed in all cases. It is also essen
tial to comply with the appropriate legal and safety regulations for the applica
tion concerned during use. The same applies to the use of accessories.
Qualified personnel means: personnel familiar with the installation, fitting, start-
up and operation of the product, and trained according to their job.
Prevention of accidents
According to prevailing accident prevention regulations, it is essential that after
mounting the transducers the user fits a cover or enclosure as follows:
SThe cover or enclosure must not be able rotate.
SThe cover or enclosure shall protect against crushing or cutting and provide
protection against parts that might come loose.
SThe covers and enclosures shall be installed at a safe distance from moving
parts or shall prevent anyone putting their hand inside.
SThe covers and enclosures shall even be fitted if the moving parts are
installed in areas to which persons do not usually have access.
The above regulations may only be diverged from, if machine parts are already
sufficiently protected owing to the design of the machine or because other pre
cautions have been taken.
Markings used
6A01639_02_X00_00 HBM: public TN
2 Markings used
2.1 The markings used in this document
Important instructions for your safety are specifically identified. It is essential to
follow these instructions in order to prevent accidents and damage to property.
Symbol Significance
CAUTION This marking warns of a potentially dangerous
situation in which failure to comply with safety
requirements can result in slight or moderate physical
injury.
Notice This marking draws your attention to a situation in
which failure to comply with safety requirements can
lead to damage to property.
Important
This marking draws your attention to important
information about the product or about handling the
product.
Tip
This marking indicates application tips or other
information that is useful to you.
Information
This marking draws your attention to information
about the product or about handling the product.
Emphasis
See….
Italics are used to emphasize and highlight text and
references to other chapters and external documents.
Scope of supply
TN A01639_02_X00_00 HBM: public 7
2.2 Symbols on the product
CE mark
The CE mark enables the manufacturer to guarantee that
the product complies with the requirements of the rele
vant EC directives (the declaration of conformity is avail
able at http://www.hbm.com/HBMdoc).
Statutory marking requirements for waste disposal
National and local regulations regarding the protection of
the environment and recycling of raw materials require
old equipment to be separated from regular domestic
waste for disposal.
For more detailed information on disposal, please contact
the local authorities or the dealer from whom you pur
chased the product.
3 Scope of supply
S1x TN Torque transfer standard including bending moment measuring
bridges
S1x Mounting instructions
S3x Connecting cable, 6 m, (with LemoRconnector on transducer side, pig
tails on amplifier side)
S1x DAkkS (national accreditation body for the Federal Republic of
Germany) calibration certificate as per DIN 51309
S1x shipping case with sealing lip
Application
8A01639_02_X00_00 HBM: public TN
4 Application
The TN torque transfer standard is a transducer for measuring static and
dynamic torques in non-rotating operation. The nominal torques are in the
range 100 N⋅m to 20 kN⋅m.
Transfer torque transducers
When used as a transfer torque transducer, the transducer helps to calibrate
reference transducers in test and calibration machines or to compare the refer
ence standards and standard machines of different calibration laboratories.
With transfer transducers, a high degree of reproducibility is important. When
torque is transferred, reproducibility is a measure for the influence of different
observers, test conditions, laboratories, mounting and time situations. So for
transfer, the same conditions have to be created as for calibration in the refer
ence standard.
Reference torque transducers
When used as a reference torque transducer, the TN transducer is mounted in
a calibration machine.
General torque measurements in non-rotating operation
The TN torque transfer standard is a precision transducer designed for use
under laboratory conditions. When used in general industrial applications there
fore, special precautions must be taken to ensure that the requisite ambient
conditions are provided. This includes the temperature and humidity conditions,
the EMC environment and the parasitic loads (bending moments, radial forces
and longitudinal forces). Should the ambient conditions differ, this will affect the
accuracy of the measurement and in serious cases, could interfere with oper
ability.
Otros manuales para TN
1
Tabla de contenidos
Idiomas:
Otros manuales de Transductor de HBM
HBM
HBM S2 Manual de usuario
HBM
HBM SK12 Manual de usuario
HBM
HBM U9B Manual de usuario
HBM
HBM Z8 Manual de usuario
HBM
HBM BN100A Manual de usuario
HBM
HBM AED9301B Manual de usuario
HBM
HBM AED9101C-Z2/22 Actualización de firmware
HBM
HBM T21WN Manual de usuario
HBM
HBM T12 Manual de usuario
HBM
HBM TB2 Manual de usuario
HBM
HBM Z4A Manual de usuario
HBM
HBM U10M Manual de usuario
HBM
HBM U15 Series Manual de usuario
HBM
HBM C2 Series Manual de usuario
HBM
HBM C18 Manual de usuario
HBM
HBM U2B Manual de usuario
HBM
HBM Z7A Series Manual de usuario
HBM
HBM WI Series Manual de usuario
HBM
HBM T5 Manual de usuario
HBM
HBM P6A Manual de usuario
Manuales populares de Transductor de otras marcas
Camille Bauer
Camille Bauer SINEAX F534 Manual de usuario
Trane
Trane KIT 16724 Instrucciones de montaje
Lumel
Lumel P18 Manual de usuario
B&C Speakers
B&C Speakers DE75PTN Manual de usuario
MAMAC SYSTEMS
MAMAC SYSTEMS PR-243 Manual
Mianyang Weibo Electronic
Mianyang Weibo Electronic WB Series Manual de usuario
