HBM TB1A Manual de usuario
Mounting Instructions | Montageanleitung |
Notice de montage
English Deutsch Français
TB1A
Hottinger Baldwin Messtechnik GmbH
Im Tiefen See 45
D-64239 Darmstadt
Tel. +49 6151 803-0
Fax +49 6151 803-9100
www.hbm.com
Mat.: 7-2001.1000
DVS: A0162-8.0 HBM: public
04.2015
EHottinger Baldwin Messtechnik GmbH.
Subject to modifications.
All product descriptions are for general information only.
They are not to be understood as a guarantee of quality or
durability.
Änderungen vorbehalten.
Alle Angaben beschreiben unsere Produkte in allgemeiner
Form. Sie stellen keine Beschaffenheits- oder Haltbarkeits
garantie dar.
Sous réserve de modifications.
Les caractéristiques indiquées ne décrivent nos produits
que sous une forme générale. Elles n'impliquent aucune
garantie de qualité ou de durablilité.
Mounting Instructions | Montageanleitung |
Notice de montage
English Deutsch Français
TB1A
2A0162-8.0 HBM: public TB1A
English
1 Safety instructions 3........................................
1.1 The markings used in this document 6..........................
1.2 Symbols on the product 7.....................................
2 Scope of supply 8..........................................
3 Application 9...............................................
4 Structure and mode of operation 10...........................
4.1 Mechanical structure 10.......................................
5 Mounting 11.................................................
5.1 General installation notes 11...................................
5.2 Mounting position 15..........................................
5.3 Conditions on site 15..........................................
5.4 Mechanical installation 15......................................
5.5 Loading capacity 23...........................................
6 Electrical connection 25......................................
6.1 Notes for cabling 26...........................................
6.2 Four‐wire technique 27........................................
7 Maintenance 28..............................................
8 Accessories 28..............................................
9 Specifications 29............................................
10 Dimensions 33..............................................
Safety instructions
TB1A A0162-8.0 HBM: public 3
1 Safety instructions
Use in accordance with the regulations
Reference torque measuring‐discs TB1A are used
exclusively for torque measurement tasks and control
and adjustment tasks directly connected thereto. Use for
any additional purpose shall be deemed to be not in
accordance with the regulations.
In the interests of safety, the transducer should only be
operated as described in the Mounting Instructions. It is
also essential to observe the appropriate legal and safety
regulations for the application concerned during use. The
same applies to the use of accessories.
The transducer is not a safety element within the mean
ing of its use as intended. Proper and safe operation of
this transducer requires proper transportation, correct
storage, assembly and mounting and careful operation.
General dangers of failing to follow the safety
instructions
The transducer corresponds to the state of the art and is
fail‐safe. The transducer can give rise to remaining
dangers if it is inappropriately installed and operated by
untrained personnel.
Everyone involved with the installation, commissioning,
maintenance or repair of the transducer must have read
and understood the Operating Manual and in particular
the technical safety instructions.
Remaining dangers
The scope of supply and performance of the transducer
covers only a small area of torque measurement
technique. In addition, equipment planners, installers and
Safety instructions
4A0162-8.0 HBM: public TB1A
operators should plan, implement and respond to the
safety engineering considerations of torque
measurement technique in such a way as to minimize
remaining dangers. Prevailing regulations must be
complied with at all times. Reference must be made to
remaining dangers connected with torque measurement
technology.
Conversions and modifications
The transducer must not be modified from the design or
safety engineering point of view except with our express
agreement. Any modification shall exclude all liability on
our part for any damage resulting therefrom.
Qualified personnel
Qualified personnel means persons entrusted with the
installation, fitting, commissioning and operation of the
product who possess the appropriate qualifications for
their function.
The transducer must only to be installed and used by
qualified personnel, strictly in accordance with the specifi
cations and with safety requirements and regulations. It
is also essential to observe the appropriate legal and
safety regulations for the application concerned during
use. The same applies to the use of accessories.
Prevention of accidents
According to prevailing accident prevention regulations, it
is essential that after mounting the transducers the user
fits a cover or enclosure as follows:
SThe cover or enclosure must not be able rotate.
Safety instructions
TB1A A0162-8.0 HBM: public 5
SThe cover or enclosure shall protect against crushing
or cutting and provide protection against parts that
might come loose.
SThe covers and enclosures shall be installed at a safe
distance from moving parts or shall prevent anyone
putting their hand inside.
SThe covers and enclosures shall even be fitted if the
moving parts are installed in areas to which persons
do not usually have access.
The above regulations may only be diverged from, if
machine parts are already sufficiently protected owing to
the design of the machine or because other precautions
have been taken.
Safety instructions
6A0162-8.0 HBM: public TB1A
1.1 The markings used in this document
Important instructions for your safety are specifically
identified. It is essential to follow these instructions in
order to prevent accidents and damage to property.
Symbol Significance
WARNING This marking warns of a potentially dangerous
situation in which failure to comply with safety
requirements can result in death or serious physical
injury.
CAUTION This marking warns of a potentially dangerous
situation in which failure to comply with safety
requirements can result in slight or moderate physical
injury.
Notice This marking draws your attention to a situation in
which failure to comply with safety requirements can
lead to damage to property.
Important
This marking draws your attention to important
information about the product or about handling the
product.
Tip
This marking indicates application tips or other
information that is useful to you.
Information
This marking draws your attention to information
about the product or about handling the product.
Emphasis
See….
Italics are used to emphasize and highlight text and
references to other chapters and external documents.
Safety instructions
TB1A A0162-8.0 HBM: public 7
1.2 Symbols on the product
CE mark
The CE mark enables the manufacturer to guarantee that
the product complies with the requirements of the rele
vant EC directives (the declaration of conformity is avail
able at http://www.hbm.com/HBMdoc).
Statutory marking requirements for waste disposal
National and local regulations regarding the protection of
the environment and recycling of raw materials require
old equipment to be separated from regular domestic
waste for disposal.
For more detailed information on disposal, please contact
the local authorities or the dealer from whom you pur
chased the product.
Scope of supply
8A0162-8.0 HBM: public TB1A
2 Scope of supply
The scope of supply includes the following:
1 Reference torque measuring‐disc
1 Mounting Instructions
1 Test record
Otros manuales para TB1A
1
Tabla de contenidos
Idiomas:
Otros manuales de Transductor de HBM
HBM
HBM AD101B Manual de usuario
HBM
HBM U9B Manual de usuario
HBM
HBM PAD4001A Manual de usuario
HBM
HBM CFT+ Series Manual de usuario
HBM
HBM SK12 Manual de usuario
HBM
HBM U93 Manual de usuario
HBM
HBM U9C Series Manual de usuario
HBM
HBM S2M Series Manual de usuario
HBM
HBM C2 Series Manual de usuario
HBM
HBM T40 Manual de usuario
Manuales populares de Transductor de otras marcas
Camille Bauer
Camille Bauer SINEAX F534 Manual de usuario
Trane
Trane KIT 16724 Instrucciones de montaje
Lumel
Lumel P18 Manual de usuario
B&C Speakers
B&C Speakers DE75PTN Manual de usuario
MAMAC SYSTEMS
MAMAC SYSTEMS PR-243 Manual
Mianyang Weibo Electronic
Mianyang Weibo Electronic WB Series Manual de usuario
