HBM Z6R Series Manual de usuario
Operating Manual | Bedienungsanleitung |
Manuel d'emploi
English Deutsch Français
Z6R…
Hottinger Baldwin Messtechnik GmbH
Im Tiefen See 45
D-64239 Darmstadt
Tel. +49 6151 803-0
Fax +49 6151 803-9100
www.hbm.com
Mat.: 7-2001.4514
DVS: A4514-1.0 HBM: public
01.2017
EHottinger Baldwin Messtechnik GmbH.
Subject to modifications.
All product descriptions are for general information only.
They are not to be understood as a guarantee of quality or
durability.
Änderungen vorbehalten.
Alle Angaben beschreiben unsere Produkte in allgemeiner
Form. Sie stellen keine Beschaffenheits- oder Haltbarkeits
garantie dar.
Sous réserve de modifications.
Les caractéristiques indiquées ne décrivent nos produits
que sous une forme générale. Elles n'impliquent aucune
garantie de qualité ou de durablilité.
Operating Manual | Bedienungsanleitung |
Manuel d'emploi
English Deutsch Français
Z6R…
2A4514-1.0 HBM: public Z6R…
English
1 Safety instructions 4........................................
2 Markings used 8............................................
2.1 Symbols on the device 8......................................
2.2 The markings used in this document 8..........................
3 Conditions on site 9........................................
4 Mechanical installation 10....................................
4.1 Important precautions during installation 10......................
4.2 Mounting and load application 11...............................
5 Electrical connection 13......................................
5.1 Connection in six-wire configuration 13..........................
5.2 Connection in four-wire configuration 14.........................
5.3 Shortening the cable 14.......................................
5.4 Cable extension 15...........................................
5.5 Parallel connection 15.........................................
5.6 EMC protection 16............................................
6 Waste disposal and environmental protection 18..............
7 Specifications 19............................................
7.1 Z6RAD1 and Z6RAC3 19......................................
7.2 Specifications for all versions 20................................
8 Dimensions 21..............................................
8.1 Z6R…/20kg …200kg 21.....................................
9 Accessories 22..............................................
9.1 Oscillating loading foot PCX 22.................................
9.2 Oscillating loading foot ZKP 23.................................
9.3 Knuckle eye ZGWR 24........................................
9.4 Cone, conical pan ZK 25.......................................
Safety instructions
4A4514-1.0 HBM: public Z6R…
1 Safety instructions
Appropriate use
Transducers of the Z6R... type series are designed solely
for technical weighing applications within the application
limits detailed in the specifications. Any other use is not
appropriate.
Any person instructed to carry out installation, commis
sioning or operation of the transducer must have read
and understood the Operating Manual and in particular
the technical safety instructions.
In the interests of safety, the transducer should only be
operated by qualified personnel and as described in the
Operating Manual. It is also essential to comply with the
legal and safety requirements for the application con
cerned during use. The same applies to the use of
accessories.
The transducer is not intended for use as a safety com
ponent. Please also refer to the section: "Additional
safety precautions". Proper and safe operation requires
proper transportation, correct storage, siting and mount
ing, and careful operation.
Operating conditions
SPlease observe the permissible maximum values
stated in the specifications for:
- Limit load
- Limit load at max. eccentricity
- Limit lateral loading
- Breaking loads
- Temperature limits
Safety instructions
Z6R… A4514-1.0 HBM: public 5
- Limits of electrical loading capacity
SNote, that when several transducers are installed in a
scale, there is not always an even distribution of load
on the individual transducers.
SThe transducers can be used as machine elements.
When used in this manner, it must be noted that, to
favor greater sensitivity, the transducer is not
designed with the safety factors usual in mechanical
engineering.
SThe transducer must not be modified from the design
or safety engineering point of view except with our
express agreement.
SThe transducer is maintenance-free.
SIn accordance with national and local environmental
protection and material recovery and recycling regula
tions, old transducers that can no longer be used
must be disposed of separately and not with normal
household garbage, see Chapter 6, Page 18.
Explosion protection version option
SComply with the relevant code of practice during
installation.
SComply with the installation conditions cited in the
Certificate of Conformity and/or the Type Certificate.
Qualified personnel
Qualified persons means persons entrusted with the
installation, fitting, commissioning and operation of the
product who possess the appropriate qualifications for
their function.
This includes people who meet at least one of the three
following requirements:
Safety instructions
6A4514-1.0 HBM: public Z6R…
SKnowledge of the safety concepts of measurement
and automation technology is a requirement and as
project personnel, they must be familiar with these
concepts.
SAs measurement or automation plant operating per
sonnel, they have been instructed how to handle the
machinery. They are familiar with the operation of the
equipment and technologies described in this docu
mentation.
SAs commissioning engineers or service engineers,
they have successfully completed the training to qual
ify them to repair the automation systems. They are
also authorized to activate, ground and label circuits
and equipment in accordance with safety engineering
standards.
Additional safety precautions
Additional safety precautions to meet the requirements of
the relevant national and local accident prevention regu
lations must be taken in plants where malfunctions could
cause major damage, loss of data or even personal
injury.
The scope of supply and performance of the transducer
covers only a small area of measurement technology.
Before starting up the transducer in a system, a project
planning and risk analysis must first be implemented,
taking into account all the safety aspects of measure
ment and automation technology so that residual risks
are minimized. This particularly concerns personal and
machine protection. The transducers function passively
and cannot implement any (safety-relevant) cutoffs. In
the event of a fault, the relevant precautions must estab
lish safe operating conditions.
Safety instructions
Z6R… A4514-1.0 HBM: public 7
General dangers of failing to follow the safety
instructions
The transducer corresponds to the state of the art and is
failsafe. The transducer may give rise to residual dangers
if it is inappropriately installed or operated.
Markings used
8A4514-1.0 HBM: public Z6R…
2 Markings used
2.1 Symbols on the device
CE certification
The CE mark enables the manufacturer to guarantee that
the product complies with the requirements of the rele
vant EC directives (the Declaration of Conformity can be
found on the HBM website (www.hbm.com) under
HBMdoc).
2.2 The markings used in this document
Important instructions for your safety are specifically
identified. It is essential to follow these instructions in
order to prevent accidents and damage to property.
Symbol Significance
WARNING This marking warns of a potentially dangerous situ
ation in which failure to comply with safety require
ments can result in death or serious physical injury.
Note This marking draws your attention to a situation in
which failure to comply with safety requirements
could lead to damage to property.
Important
This marking draws your attention to important in
formation about the product or about handling the
product.
Emphasis
See …
Italics are used to emphasize and highlight text and
identify references to sections, diagrams, or external
documents and files.
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Idiomas:
Otros manuales de Transductor de HBM
HBM
HBM TB1A Manual de usuario
HBM
HBM SLB700A/06VA1 Manual de usuario
HBM
HBM TOP Transfer Manual de usuario
HBM
HBM Z30 Manual de usuario
HBM
HBM C6A Manual de usuario
HBM
HBM T22 Manual de usuario
HBM
HBM T12 Manual de usuario
HBM
HBM T40B Manual de usuario
HBM
HBM U5 Series Manual de usuario
HBM
HBM Z30A Manual de usuario
HBM
HBM P3MB Manual de usuario
HBM
HBM SLB-700A Manual de usuario
HBM
HBM Paceline CFT Manual de usuario
HBM
HBM TOP-Z30A Manual de usuario
HBM
HBM WI Series Manual de usuario
HBM
HBM AED9101C-Z2/22 Actualización de firmware
HBM
HBM P8AP Manual de usuario
HBM
HBM T21WN Manual de usuario
HBM
HBM PW15iA Manual de usuario
HBM
HBM Z4A Manual de usuario
Manuales populares de Transductor de otras marcas
Camille Bauer
Camille Bauer SINEAX F534 Manual de usuario
Trane
Trane KIT 16724 Instrucciones de montaje
Lumel
Lumel P18 Manual de usuario
B&C Speakers
B&C Speakers DE75PTN Manual de usuario
MAMAC SYSTEMS
MAMAC SYSTEMS PR-243 Manual
Mianyang Weibo Electronic
Mianyang Weibo Electronic WB Series Manual de usuario
