CTA PAD-MSPC10 Series Manual de usuario
Magnetic Splash-Proof Case
with Metal Mounting Plates and Table Stand
for iPAD 8th Gen 10.2”, iPad Air 4, iPad Pro 10.5” and More
888-733-4448
CONTENTS:
x1 x1
1. Peel the external
silicone sleeve from the
internal hard case.
2. To open internal hard case,
apply gentle pressure to the
small clips (as shown to the
left). The case will open with all
(4) sides are unclipped.
3. Insert tablet into the back
portion of the hard cover.
5. Place on the external
silicone rubber sleeve over the
hard case again.
1.Locate tablet case and insert device.
INSTRUCTIONS:
**Stand comes fully assembled
Take a PAD-MSPC10 series case and align PAD-MSPC10 series case
magnets to the (4) corners of the metal stand. Adjust omni-directionally
and tilt to your preference.
2.Placing magnetic tablet case on stand
4. Clip the front screen with the
back portion of the hardcover
around all the edges.
1 2 3
888-733-4448
How to fold out tablet kickstand:
1. Locate kickstand at case rear and fold out underneat strap
2. Display tablet at desired viewing angle
3. Push kickstand back into the original spot to return to handheld mode.
Otros manuales de Rack y soporte de CTA
CTA
CTA PAD-ASKB10 Manual de usuario
CTA
CTA PAD-HSKSBAE Manual de usuario
CTA
CTA ADD-PARAFS Manual de usuario
CTA
CTA PAD-UAM Manual de usuario
CTA
CTA PAD-SHFS Manual de usuario
CTA
CTA ADD-USGTWP Manual de usuario
CTA
CTA PAD-TAM Manual de usuario
CTA
CTA CP-CSWMHW Manual de usuario
CTA
CTA PAD-PARAFPE Manual de usuario
CTA
CTA LT-LFSDM Manual de usuario
CTA
CTA PAD-VPOS2BC Manual de usuario
CTA
CTA PAD-MFSV Manual de usuario
CTA
CTA PAD-HGTSB Manual de usuario
CTA
CTA ADD-ADMA Manual de usuario
CTA
CTA PAD-PARAFDC Manual de usuario
CTA
CTA PAD-CHAIRPB Manual de usuario
CTA
CTA ADD-FS2VDMB Manual de usuario
CTA
CTA PAD-DSGK Manual de usuario
CTA
CTA ADD-PARAFS Manual de usuario
CTA
CTA PAD-CHKBM10 Manual de usuario
