CTA PAD-PARAPOSW Manual de usuario

PAD-PARAPOSW

INSTALLATION - MANUAL

POS Station w/ Printer Stand, Magnetic Scanner

Card Reader Holder & Universal Security Enclosure (White)

INSTALLATION:

1.Installing the Enclosure :

2. Placing Magnetic Card Reader 3. Placing Magnetic Scanner Holder

1A. Align enclosure (A) with Kiosk Body (B) 1B. After enclosure vesa holes are aligned to VESA plate,

rotate in screws (G) with provided tool (M) while holding

hex nuts (F) from behind until securely fastened.

CONTENTS:

2A. Place magnetic card reader holder (E)

anywhere magnetic to setup. 3B. Place magnetic scanner holder (D) on arm as

shown above.

x1

B

x1

Arm

Extender

C

x1

Scanner

Holder

D

x1

Card Reader

Holder

E

x1

A

x1

Key

Set

Lx1

M5

Allen

Key

M

x2

H

x2

I

x1

K

x1

J

x4

M5

Nut

F

x4

M5

X6

G

A

B

A

BB

G

F

E

D

**Tablet for illustration only and not included

M

N

Foam / Sheet

Bundle Kit

J

3A.Screw in arm extender (C) as illustrated using

screws (J) and provided tool (M).

C

5. (Optional) Placing Hole Fillers View Angles and Orientation

5A. If not anchoring into surface, use the (2) hole

fillers (K) to plug in for a more seamless look.

Horizontal or

Vertical View Tilt Adjustability

**Tablet and Powerdrill for illustration only and not included

H

I

B

B

K

4. (Optional) Anchoring Base to Surface

4A. Drill (2) holes into the surface using a power drill or like (not provided). Insert the plastic anchors (H)

into the holes and then align the kiosk (A) holes with surface. Then take the screws (I) and rotate in with

screwdriver (not included) until securely tightened.

**Tablet for illustration only and not included

Anti-Theft Enclosure Security Setting up Tablet Enclosure

Tilt the enclosure as seen above for ideal viewing

angle. Rotate 90 degrees for preferred portrait or

landscape views.

Place the key (L) in the enclosure to open up the

enclosure. Rotate and remove to lock the

enclosure. Identify the foam / sheet bundle (N) in package. Select the

corresponding pieces that will fit your device within the

enclosure. Try them out until you find the correct fit.

Otros manuales de Rack y soporte de CTA

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario