CTA PAD-FTSU Manual de usuario
Product Manual
Product Name: Flat-Folding Tabletop Security Stand for 7-14 Inch Tablets
Product No.: PAD-FTSU
Lock catch
Lock
Key
Sliding clamp
(2) Bolts with nut (2) Screws
Plastic cover
Plastic cover
Key slot
Base
Holder
Fixed clamp
Using the bracket
1) Place the bracket on a flat surface and then adjust the holder into a horizontal position.
2) Place the tablet corner diagonally into the fixed clamp end,then push sliding clamp in until it is firmly
cradling the tablet at the opposite corner.
3) Push the lock catch back in, then turn the key to lock in place.
Lock
Unlock
Using anti-theft cable
1) Attach cable to slot at base of bracket.
2) Attach opposite end to any permanent fixture using loop.
Optional accessories
Optional fixed mode
Stick adhesive pads to bottom of bracket
base for scratch protetion and temporary
mounting
Remove two plastic covers and then use the screws fix the base on the flat surface firmly.
12
Key slot
Cable
Plastic
covers screws
Tabla de contenidos
Otros manuales de Rack y soporte de CTA
CTA
CTA CP-CSWMHW Manual de usuario
CTA
CTA PAD-CHKB Manual de usuario
CTA
CTA PAD-USGTW Manual de usuario
CTA
CTA PAD-MFSV Manual de usuario
CTA
CTA PAD-2VDMB Manual de usuario
CTA
CTA PAD-SHFS Manual de usuario
CTA
CTA PAD-ADMA Manual de usuario
CTA
CTA PAD-ASKM6 Manual de usuario
CTA
CTA ADD-ADMA Manual de usuario
CTA
CTA PAD-CHKBM10 Manual de usuario
CTA
CTA ADD-FS2VDMB Manual de usuario
CTA
CTA ADD-PARAFSV Manual de usuario
CTA
CTA PAD-TAM Manual de usuario
CTA
CTA ADD-PARAFS Manual de usuario
CTA
CTA PAD-CHKWDC Manual de usuario
CTA
CTA PAD-PARAF1 Manual de usuario
CTA
CTA PAD-UAM Manual de usuario
CTA
CTA PAD-ASK13B Manual de usuario
CTA
CTA ADD-2VDMB Manual de usuario
CTA
CTA PAD-PF1ICC Manual de usuario
