Konica Minolta Color Care IQ-501 Manual de usuario

QUICK GUIDE

MN – Bloomington: 952.925.6800 • Mankato: 507.625.8040 • Rochester: 507.292.8888 • St Cloud: 320.255.8888 • Willmar: 320.905.0289

WI – Eau Claire: 715.834.2679 • Hudson: 715.834.2679 • La Crosse: 608.782.7587

8/9/2018

IQ-501 Guide

Linearization: [10-12min]

1. Select button, located on the

bottom of the main screen at the machine panel.

2. Select “01 Quality Adjustment.”

3. Select “01 Package Color Auto Adjustment.”

(Steps a to c only need to be done on initial time or

if something changes such as paper tray)

a. To adjust settings, select “Initial Set.”

i. Screen of Adjustment Target: Select

“Screen1.”

ii. Additional Adjustment: Select all options if wanting to run full linearization. Also have

the option to run for specific adjustments:

1. Gamma Auto Adj. (approx. 120 sec.)

2. Dens. Balance Adj. (approx. sec.)

3. Max Density Adj. (approx. 360 sec.)

4. Color Density (approx. 60 sec.)

5. Controller Calib. (approx. 120 sec.)

iii. Select OK to close.

b. To choose a specific paper tray, select “Paper Setting.”

i. Choose a specific paper tray to test print from.

c. To choose specific output tray, select “Output

Setting.”

i. Choose specific paper output tray,

then select OK to close.

4. Press “Start.” Multiple color patch sheets will print to

linearize machine.

a. The machine will print out several multi-color patch

sheets.

5. Once linearization is complete, select “Adj. Result” on the

bottom-right of screen to view results.

6. Select Detailed Result to view color curves.

QUICK GUIDE

MN – Bloomington: 952.925.6800 • Mankato: 507.625.8040 • Rochester: 507.292.8888 • St Cloud: 320.255.8888 • Willmar: 320.905.0289

WI – Eau Claire: 715.834.2679 • Hudson: 715.834.2679 • La Crosse: 608.782.7587

8/9/2018

Calibration:

1. If Controller Calibration is highlighted in the Package Color Adjustment Initial Setting then when it

goes through the linearization process in step C, then calibration is performed. This step is ideal for

gloss or coated paper.

2. Fiery Calibration from the Press Control Panel (ideal for plain paper or anytime you just need to

calibrate (gloss or plain) and not linearize)

i. Controller (from KM panel)

ii. Press the blue icon button in the bottom left corner of screen

iii. Press Tools

iv. Press Calibrate

v. Follow screen instructions (choose paper/paper tray with plain paper, ect.)

3. Fiery Color Profiler Suite (CD that came with Fiery RIP- you do not need a license to use Calibration

within FCPS, you will run it in Demo mode).

i. Follow screen instructions

QUICK GUIDE

MN – Bloomington: 952.925.6800 • Mankato: 507.625.8040 • Rochester: 507.292.8888 • St Cloud: 320.255.8888 • Willmar: 320.905.0289

WI – Eau Claire: 715.834.2679 • Hudson: 715.834.2679 • La Crosse: 608.782.7587

8/9/2018

Registration:

1. Select the “Both Sides” button, located on the bottom of the main screen at the machine panel.

2. Select a paper tray to adjust.

3. Select the “Auto Measures” tab.

a. Optional: Select “ON” for Periodical Adjustment.

b. Periodical Adjustment: As time goes on, machine will stop printing when a deviation is detected,

then will prompt the operator to run “Auto Measure”.

4. To test, select “Print Mode” from the bottom of the screen.

5. Indicate how many charts to be printed (1-20), then select “Start.”

a. It is recommended to print more than one chart to properly compare adjusted output.

6. Examine chart(s). Re-run additional test prints as needed.

7. Select “Exit Print Mode” to view adjustment measurements.

8. Select “Close” to save and exit screen.

QUICK GUIDE

MN – Bloomington: 952.925.6800 • Mankato: 507.625.8040 • Rochester: 507.292.8888 • St Cloud: 320.255.8888 • Willmar: 320.905.0289

WI – Eau Claire: 715.834.2679 • Hudson: 715.834.2679 • La Crosse: 608.782.7587

8/9/2018

Adjustment Features from the Fiery:

1. Auto Image Adjustment:

a. Select the “Image” tab in Printing Preferences/Properties.

b. “Auto Image Adjustment.”

2. When “Auto Image Adjustment” is turned on, color bars and crop marks will print when using

oversize sheets for continuous measurement.

a. Alternating CMYK & RGB/Process K strips-approx. 9mm per edge is used.

Periodic Adjustments- Set from control panel- activate at anytime or when there isn’t room for color bars

or crop marks

Otros manuales para Color Care IQ-501

Tabla de contenidos

Otros manuales de Accesorios de impresora de Konica Minolta

Konica Minolta

Konica Minolta DF-633 Manual de usuario

Konica Minolta

Konica Minolta Pi3505e Manual de usuario

Konica Minolta

Konica Minolta Color Care IQ-501 Manual de usuario

Konica Minolta

Konica Minolta IP-011 Cómo utilizar

Konica Minolta

Konica Minolta LU-204 Manual de usuario

Konica Minolta

Konica Minolta HT-509 Manual de usuario

Konica Minolta

Konica Minolta EK-608 Manual de usuario

Konica Minolta

Konica Minolta Image Controller IC-205 Manual de usuario

Konica Minolta

Konica Minolta FS-110 Manual de usuario

Konica Minolta

Konica Minolta PC-101 Manual de usuario

Konica Minolta

Konica Minolta MK-735 Manual de usuario

Konica Minolta

Konica Minolta JS-506 Manual de usuario

Konica Minolta

Konica Minolta PC-410 Manual de usuario

Konica Minolta

Konica Minolta bizhub C220 Series Manual de usuario

Konica Minolta

Konica Minolta bizhub C650 Series Manual de usuario

Konica Minolta

Konica Minolta PK-511 Manual de usuario

Konica Minolta

Konica Minolta HT-502 Manual de usuario

Konica Minolta

Konica Minolta bizhub 223 Manual de usuario

Konica Minolta

Konica Minolta RU-513 Manual de usuario

Konica Minolta

Konica Minolta DK-510 Manual de usuario

Konica Minolta

Konica Minolta Magicolor 5550 Instrucciones de funcionamiento y mantenimiento

Konica Minolta

Konica Minolta magicolor 2430 DL Manual de usuario

Konica Minolta

Konica Minolta HD-524 Manual de usuario

Konica Minolta

Konica Minolta DF-704 Manual de usuario

Manuales populares de Accesorios de impresora de otras marcas

Star Micronics

Star Micronics TSP800 Series Manual de usuario

REA

REA JET HR pro 2K Manual de usuario

HP Laserjet,Color Laserjet 4si Manual de usuario

oliser

oliser MS 45 Manual de usuario

Roland

Roland DU2-64 Instrucciones y recetas

Xerox

Xerox EFI EXP6000 Manual de usuario

Canon

Canon Finisher-T1 Manual de usuario

Sharp

Sharp FO-1MK Manual de usuario

Labelmate

Labelmate PM-300 Manual de usuario

Epson

Epson T6248 Manual de funcionamiento

Epson

Epson OT-BZ20 Manual de usuario

Canon

Canon TonerRobot EP-27 Manual de usuario

Ricoh

Ricoh LCIT RT5100 Guía de inicio rápido

GBC

GBC 16 Series Manual de usuario

Canon

Canon INNER 2-WAY TRAY-E1 Manual de operación y mantenimiento

Develop

Develop SD-509 Manual de usuario

Kyocera

Kyocera KM-6230 Manual

Triumph Adler

Triumph Adler DF-710 Manual