preparation
Place an Ink supply bottle to the back of the machine and insert the
ink supply tube into the bottle.
Plug in the plug and the machine will be ready to start filling .
Now, The machine is ready to fill the cartridges. Before filling the
cartridges, be sure that they are empty. If not, evacuate the remaining ink
from cartrdige.
This machine is desinged to only fill FRESH CARTRIDGES if u do
not have a steam genarator.
Strictly recommended : Before filling the cartridges we
recommend you to clean the printheads of the cartridges by a steam
genarator. It will help you to fill the cartridges easily and will open the all
clogged or dried printheads, So, your success rate will inscrease
