Konica Minolta bizhub C650 Series Manual de usuario
User’s Guide
Authentication Unit
(Biometric Type AU-101)
A09M-9552-01
Contents
AU-101 1
Contents
1 Introduction....................................................................... 2
1.1 Product features .................................................................................. 2
1.2 Prerequisites ......................................................................................... 3
2 Device description............................................................ 4
2.1 Part names and their functions ........................................................... 4
3 Using Authentication Unit (Biometric Type) AU-101 ..... 5
3.1 Multifunctional product settings ......................................................... 5
3.2 Registering users ................................................................................. 8
3.2.1 Registering from the control panel of the multifunctional
product .............................................................................................. 9
3.2.2 Registering from Data Administrator ............................................... 11
3.3 Logging on to a multifunctional product ......................................... 23
3.4 Touch & Print function ....................................................................... 25
3.4.1 Touch & Print (For Windows) ........................................................... 26
3.4.2 Touch & Print (for Macintosh) .......................................................... 30
3.4.3 Selecting the print job to be printed from the control panel ........... 32
4 Care of Authentication Unit
(Biometric Type) AU-101 ................................................ 36
5 Specifications.................................................................. 38
6 Troubleshooting.............................................................. 39
Introduction 1
AU-101 2
1 Introduction
Thank you for choosing this device.
This User’s Guide provides descriptions of the operating procedures and
precautions for using Authentication Unit (Biometric Type) AU-101. Carefully
read this User’s Guide before using this device.
The actual screens that appear may be slightly different from the screen
images used in this User’s Guide.
Authentication Unit (Biometric Type) AU-101 is hereafter referred to as “this
device”.
Manual conventions
-Caution: This warns of a possibility of damage to this device.
-Important: This indicates instructions that should be followed to
ensure correct functionality and efficiency of this device.
Trademark/copyright acknowledgements
-Microsoft®and Windows®are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other
countries.
-All other company names and product names mentioned in this
User’s Guide are either registered trademarks or trademarks of their
respective companies.
Restrictions
-Unauthorized use or reproduction of this User’s Guide, whether in its
entirety or in part, is strictly prohibited.
-The information contained in this User’s Guide is subject to change
without notice.
1.1 Product features
This device is a biometric authentication system that performs user
authentication by scanning vein patterns in a finger. Logon and print job
operations can be authenticated with finger vein patterns when using
multifunctional products with user authentication settings specified.
Introduction 1
AU-101 3
1.2 Prerequisites
-Refer to “5 Specifications” on page 38.
-The optional local interface kit and working table must be installed on
the multifunctional product.
2
Note
In order to use this device, multifunctional product settings must be
specified by the technical representative.
Device description 2
AU-101 4
2 Device description
2.1 Part names and their functions
The status of this device is indicated by a status indicator and tone.
Top view
Rear view
1
23
No. Part name Description
1 Status indicator Indicates this device’s status.
2 Security slot Used for connecting the security cable to prevent
thefts.
(complies with the security cable standards of the
Kensington Computer Products Group)
3 USB port (type mini-B) Used to connect a USB cable (mini-B plug).
Status indicator Device status
Lit (green) Standing by/authentication completed
Flashing (green) Authenticating/scanning
Lit (red) Authentication failed/scanning failed
Off This device is not detected.
Tone Device status
One short beep Starting to scan
One short beep Retrying after authentication failed
One short beep Authentication completed
Two short beeps Authentication failed
Using Authentication Unit (Biometric Type) AU-101 3
AU-101 5
3 Using Authentication Unit (Biometric
Type) AU-101
In order to use this device, user finger vein patterns must first be registered
with the machine. A registered user can log on to a multifunctional product
or print a print job after completing authentication with their finger vein
patterns. The following procedures describe how to specify the necessary
settings on the multifunctional product, register users, and perform the logon
and print job operations after completing authentication.
2
Note
Align the index finger with the indentation and notch in the scanner, and
then position the finger so that the tip lightly touches the edge of the
scanner. Place your thumb and middle finger down to hold this device in
place on both sides, and avoid moving the index finger being used for
authentication.
For details on positioning the finger on this device, refer to the Quick
Guide Authentication Unit (Biometric Type AU-101).
Important
-Do not place any object other than your finger in the scanner of this
device while scanning, otherwise the device may malfunction.
-Do not disconnect the cable connecting the device to the computer
while scanning, otherwise the system may become unstable.
3.1 Multifunctional product settings
!
Detail
User authentication on the multifunctional product must be set for
machine authentication.
1From the control panel of the multifunctional product, touch [User
Authentication/Account Track] on the Administrator Settings screen,
and then touch [General Settings].
Using Authentication Unit (Biometric Type) AU-101 3
AU-101 6
2Set “User Authentication” to “ON (MFP)”, and then touch [OK].
2
Reminder
External server authentication is not supported.
When combined with account track settings, set “Synchronize User
Authentication & Account Track” to “Synchronize”. If “Do Not
Synchronize” is selected, the Touch & Print function cannot be used.
3Touch [Authentication Device Settings], then [General Settings], then
[Bio Authentication].
4Select the desired settings under “Beep Sound” and “Operation
Settings”.
– Under “Beep Sound”, select whether or not a beep is produced
when scanning of the finger vein pattern is completed successfully.
Using Authentication Unit (Biometric Type) AU-101 3
AU-101 7
– Under “Operation Settings”, select the logon method after
registration.
1-to-many authentication: Logon is possible simply by positioning
the finger.
1-to-1 authentication: Logon is possible by entering a user name
and positioning the finger. If users are registered with “1-to-1
authentication” selected, the Touch & Print function cannot be
used.
– For details on logging on, refer to “Logging on to a multifunctional
product” on page 23.
5Touch [OK], and then touch [OK] in the next screen that appears.
6Touch [Touch & Print Setting].
7Select the printing method for the Touch & Print function.
– Print All Jobs: Select this setting to print all documents after
completed authentication once when multiple documents are
saved in the Touch & Print user box.
– Print Each Job: Select this setting to print one document saved in
the Touch & Print user box each time authentication is completed.
– If “OFF” is selected, the Touch & Print function cannot be used.
Using Authentication Unit (Biometric Type) AU-101 3
AU-101 8
– For details on the Touch & Print function, refer to “Touch & Print
function” on page 25.
8Touch [OK].
9Touch [Logoff Settings].
10 Select whether or not the user is logged off when scanning of the
document is finished after the user has logged on to this machine.
11 Touch [OK].
12 Touch [Close], and then touch [Close] in the next screen that appears.
3.2 Registering users
There are two methods for registering users.
-Connecting this device to the multifunctional product and registering
directly from the multifunctional product
-Connecting this device to a computer and registering using Data
Administrator
!
Detail
Registered user data is stored on the hard disk of the multifunctional
product. If the user authentication method on the multifunctional product
is changed or the hard disk is reformatted, the registered user data is
erased.
Using Authentication Unit (Biometric Type) AU-101 3
AU-101 9
3.2.1 Registering from the control panel of the multifunctional
product
1From the control panel of the multifunctional product, touch [User
Authentication/Account Track] on the Administrator Settings screen,
and then touch [Authentication System], then [User Registration].
2Touch the button for a registration number, and then touch [Edit].
3Touch [Register Auth. Info.].
Otros manuales para bizhub C650 Series
24
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Accesorios de impresora de Konica Minolta
Konica Minolta
Konica Minolta PI-506 Manual de usuario
Konica Minolta
Konica Minolta PC-101 Manual de usuario
Konica Minolta
Konica Minolta magicolor 2430 DL Manual de usuario
Konica Minolta
Konica Minolta RU-513 Manual de usuario
Konica Minolta
Konica Minolta KIP Color 80 Manual de usuario
Konica Minolta
Konica Minolta WT-513 Manual de usuario
Konica Minolta
Konica Minolta Image Controller IC-402 Manual de usuario
Konica Minolta
Konica Minolta VI-506 Manual de usuario
Konica Minolta
Konica Minolta IP-011 Cómo utilizar
Konica Minolta
Konica Minolta Di1611 Manual de usuario
Konica Minolta
Konica Minolta Color Care IQ-501 Manual de usuario
Konica Minolta
Konica Minolta LU-302 Manual de usuario
Konica Minolta
Konica Minolta bizhub 223 Manual de usuario
Konica Minolta
Konica Minolta FS-505 Manual de usuario
Konica Minolta
Konica Minolta HT-509 Manual de usuario
Konica Minolta
Konica Minolta DF-633 Manual de usuario
Konica Minolta
Konica Minolta PI-505 Manual de usuario
Konica Minolta
Konica Minolta DK-510 Manual de usuario
Konica Minolta
Konica Minolta DF-704 Manual de usuario
Konica Minolta
Konica Minolta IT-101 Cómo utilizar
