Keysight Technologies B1505A Manual de usuario

Keysight Technologies B1505A

Power Device Analyzer / Curve Tracer

User’s Guide

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation into

a foreign language) without prior agreement

and written consent from Keysight Technolo-

gies as governed by United States and inter-

national copyright laws.

Manual Part Number

B1505-90000

Edition

Edition 1, June 2009

Edition 2, November 2009

Edition 3, June 2010

Edition 4, August 2010

Edition 5, June 2011

Edition 6, June 2012

Edition 7, September 2012

Edition 8, November 2012

Edition 9, October 2013

Edition 10, May 2015

Edition 11, September 2015

Edition 12, January 2016

Printed in:

Printed in Malaysia

Published by:

Keysight Technologies International Japan

G.K.

9-1, Takakura-cho, Hachioji-shi, Tokyo

192-0033 Japan

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accordance

with the terms of such license.

Declaration of Conformity

Declarations of Conformity for this product

and for other Keysight products may be

downloaded from the Web.

U.S. Government Rights

The Software is “commercial computer soft-

ware,” as defined by Federal Acquisition Reg-

ulation (“FAR”) 2.101. Pursuant to FAR 12.212

and 27.405-3 and Department of Defense FAR

Supplement (“DFARS”) 227.7202, the U.S.

government acquires commercial computer

software under the same terms by which the

software iscustomarily provided to the public.

Accordingly, Keysight provides the Software

to U.S. government customers under its stan-

dard commercial license, which is embodied

in its End User License Agreement (EULA).

The license set forth in the EULA represents

the exclusive authority by which the U.S.

government may use, modify, distribute, or

disclose the Soft-ware. The EULA and the

license set forth therein, does not require or

permit, among other things, that Keysight: (1)

Furnish techni-cal information related to

commercial com-puter software or

commercial computer software

documentation that is not customar-ily

provided tothe public; or (2) Relinquish to, or

otherwise provide, thegovernment rights in

excess of these rights customarily provided

to the public to use, modify, reproduce,

release, perform, display, or disclose com-

mercial computer software orcommercial

computer software documentation. Noaddi-

tional government requirements beyond those

set forth inthe EULA shall apply, except to the

extent that those terms, rights, or licenses are

explicitly required from all providers of com-

mercial computer software pursuant to the

FAR andthe DFARS and are set forth specifi-

cally in writing elsewhere in the EULA. Key-

sight shall be under no obligation to update,

revise or otherwise modify the Software.With

respect to any technical data asdefined by

FAR 2.101, pursuant to FAR 12.211 and

27.404.2 and DFARS 227.7102, the U.S. gov-

ernment acquires nogreater than Limited

Rights as defined in FAR 27.401 or DFAR

227.7103-5 (c), as applicable in any technical

data.

Warranty

THE MATERIAL CONTAINED IN THIS DOCU-

MENT IS PROVIDED “AS IS,” AND IS SUBJECT

TO BEING CHANGED, WITHOUT NOTICE, IN

FUTURE EDITIONS. FURTHER, TO THE MAXI-

MUM EXTENT PERMITTED BY APPLICABLE

LAW, KEYSIGHT DISCLAIMS ALL WARRAN-

TIES, EITHER EXPRESS OR IMPLIED, WITH

REGARD TO THIS MANUAL AND ANY INFOR-

MATION CONTAINED HEREIN, INCLUDING

BUT NOT LIMITED TO THE IMPLIED WAR-

RANTIES OF MERCHANTABILITY AND FIT-

NESS FOR A PARTICULAR PURPOSE.

KEYSIGHT SHALL NOT BE LIABLE FOR

ERRORS OR FOR INCIDENTAL OR CONSE-

QUENTIAL DAMAGES IN CONNECTION WITH

THE FURNISHING, USE, OR PERFORMANCE

OF THIS DOCUMENT OR OF ANY INFORMA-

TION CONTAINED HEREIN. SHOULD KEY-

SIGHT AND THE USER HAVE A SEPARATE

WRITTEN AGREEMENT WITH WARRANTY

TERMS COVERING THE MATERIAL IN THIS

DOCUMENT THAT CONFLICT WITH THESE

TERMS, THE WARRANTY TERMS IN THE SEP-

ARATE AGREEMENT SHALL CONTROL.

COMPLIANCE WITH GERMAN NOISE REQUIREMENTS

This is to declare that this product is in conformance with the German Regulation on

Noise Declaration for Machines

(Lärmangabe nach der Maschinenlärminformation-Verordnung -3.GSGV Deutschland).

• Herstellerbescheinigung

GERÄUSCHEMISSION

Lpa < 70 dB

am Arbeitsplatz

normaler Betrieb

nach DIN 45635 T. 19

• Manufacturer’s Declaration

ACOUSTIC NOISE EMISSION

Lpa < 70dB

operator position

normal operation

per ISO 7779

South Korean Class A EMC declaration

This equipment is Class A suitable for professional use and is for use in electromagnetic

environments outside of the home.

• When the RED indicator lights, lethal voltage (±10 kV dc/pulse) may appear at

measurement terminals.

•Usually use the interlock function.

• Do not operate the instrument unless another person is around the work space who is

familiar with instrument operation and hazards or administering first aid.

• Potentials less than ±500 V may cause death under certain conditions. Therefore,

adequate preventive measures must be taken at all times!

FIRST AID FOR ELECTRIC SHOCK

SPECIAL ATTENTION TO RESCUE IN SAFETY

• Never rush into an accidental situation.

• Take special attention to the following notices to prevent second accident.

• Do NOT touch the CASUALTY or conductive surface with your hands unprotected.

• Shut off high voltage at once.

• Disconnect AC mains.

• If it is unsure to make safe, the following procedure will helps to protect your lives

during the CASUALTY is rescued.

• Stand on a dry insulating material; use a dry wooden or plastic implement to free

the CASUALTY from contact with hazardous electrical source.

• Ground the circuit to de-energize.

WARNING

High Voltage

is used in the operation of this equipment.

LETHAL VOLTAGE on CONTACT

may be present at measurement terminals,

if you fail to take in all safety precautions!

• Free the CASUALTY from the LIVE conductor

CALL EMERGENCY

• Call your local Emergency number immediately, if any of signs or symptoms shown in

the following table will be found.

http://en.wikipedia.org/wiki/Emergency_telephone_number#Emergency_numbers

DELAYED SYMPTOMS

• In some cases, electric shock can cause injuries that are not evident and symptoms

may be delayed.

• Burns to the CASUALTY may be greater than they appear on the surface.

• For these reasons, all electric shock CASUALTY should be taken to hospital for

advanced observation.

English Deutsch French Japanese Korean Simplified

Chinese

Traditional

Chinese

toms S

tome S

tômes ඙ೃ㰫䤚 ᚁೃ ᚪೃ

Cardiac arrest Herz-Kreislauf-Stillsta

Arestation

cardio

ulmonaire

ᚰ⫵೵Ṇ 㕂䘦㩫㰖 ᚰ⫵೵Ṇ ᚰ⫵೵Ṇ

Abnormal cardiac

thm

Arrhythmia Arythmie

୙ᩚ⬦ ⿖㩫ⰻ ⬧ᚊ୙滸⬦ᚊ୙㰺

Respiratory failure

(difficult or absent

breathin

)

Respiratorischer

Mißerfolg

Échec respiratoire

࿧྾୙඲ 䢎䦷⿖㩚 ࿧྾୙඲ ࿧྾୙඲

Muscle pain and

contractions

Muskelschmerz und

Zusammenziehungen

Douleur du muscle

et contractions

➽⫗③

②ᨥ

⁒㥷䐋

㑮㿫

⫙⫗③

䕱㋃

⫙⫗③

②ᨥ

Seizures (heart

beat sto

ed)

Herzlähmung Paralysie cardiaque

ᚰ⮚㯞⑷ 㕂㧻 Ⱎ゚ ᚰ傷㯞⑶ ᚰ⮤㯞⑷

Numbness and

tingling

Eine Taubheit /

Stachel

Un engourdissement

/Uneépine

⑷ࢀ

่③

㩖Ⰲ┺

Ṗ㔲③

⍹㯞

่③

ⓐ㯞

่③

Unconsciousness Bewusstlosigkeit Évanouissement

ព㆑୙󰩣 㦮㔳⿞ⳛ ព孮୙󰩣 ព㆑୙󰩣

Entrance and exit

wound burns

Eine elektrische

Schocks

Une trace du choc

électri

ឤ㟁㊧ Ṧ㩚㧦ῃ ゐ䓝⑞㏠゙㟁⑞㊧

First Aid for Electric Shock Procedure

Danger

Check for DANGER, make SAFE first to YOU, Others, and the CASUALTY.

Response

Check for a RESPONSE.

Leave on back.

If not conscious,

1. Ask others to emergency CALL for an ambulance immediately.

2. HELP to bring AED, ASAP.

3. Start CPR by YOU.

CPR

for ADULT only

Start the center of chest compressions (>100 compressions per minute)

without

stopping until emergency medical services arrive .

One of the most famous chest compression-only CPR is AHA Hands-Only CPR which

is without mouth-to-mouth rescue breaths.

Continue CPR until

Signs of life return.

AED is ready to use.

Medical services arrive and take over.

If YOU have a trained rescue skill, should apply the following step.

If not, only keep chest compression until others help.

Airway

No foreign material

Leave on back, open airway.

Foreign material

Place in the recovery position, clear of objects.

Breathing

30 compress & 2 breaths

Defibrillator

Apply AED with following voice prompts.

If no AED available, continue CPR until qualified personnel arrives.

AED: Automated External Defibrillator

CPR: Cardio Pulmonary Resuscitation

AHA: American Heart Association, Inc.

Do not give compression-only CPR to infants and children — all infants and children who have a sudden

cardiac arrest need conventional CPR. Also should not be used for adults whose cardiac arrest is from

respiratory causes, or for an unwitnessed cardiac arrest.

Safety Summary

The following general safety precautions must be observed during all phases of

operation, service, and repair of this instrument. Failure to comply with these precautions

or with specific warnings elsewhere in this manual may impair the protections provided

by the instrument. In addition, it violates safety standards of design, manufacture, and

intended use of the instrument. Keysight Technologies, Inc. assumes no liability for

customer’s failure to comply with these requirements.

Product manuals may beprovided on CD-ROM or in printed form. Printed manuals are

an option for many products. Manuals may also beavailable on the Web.

NOTE Do not use this instrument in any manner not specified by the manufacturer. The

protective features of this instrument may be impaired if it is used in a manner not

specified in the operation instructions.

This instrument is an INDOOR USE product.

This instrument complies with INSTALLATION CATEGORY II for mains input and

INSTALLATION CATEGORY I for measurement input terminals, and POLLUTION DEGREE 2

defined in IEC 61010-1.

If an instrument is marked CAT I (IEC Measurement Category I), or it is not marked with a

measurement category, its measurement terminals must not be connected to

line-voltage mains.

Safety of any system incorporating the equipment is the responsibility of the assembler of

the system.

WARNING Hazardous voltage, instrument maximum output voltage may appear at the measurement

terminals (High, Force, Guard, and Sense) if Interlock terminal is closed. Open the

Interlock terminal when the measurement terminals are accessible. Voltage applied to

the terminals will be limited up to ±42 V.

Do not work the interlock function intentionally in order to bring the output voltage to the

safe level. While the high voltage indicator is lit, the dangerous voltage by the output

voltage or the residual charge appears on the measurement terminal.

•DANGEROUS PROCEDURE WARNINGS

Warnings, such as WARNING on the previous page, shall be complied. Procedures

throughout in this manual prevent you from potentially hazard. Their instructions

contained in the warnings must be followed.

•BEFORE APPLYING POWER

Verify that all safety precautions are taken. Make all connections to the instrument

before applying power. Note the instrument's external markings described under

“Safety Symbols”.

•GROUND THE INSTRUMENT

This is Safety Class I instrument. To minimize shock hazard, the instrument chassis

and cabinet must be connected to an electrical ground. The power terminal and the

power cable must meet International Electrotechnical Commission (IEC) safety

standards.

•DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE

Do not operate the instrument in the presence of flammable gases or fumes.

Operation of any electrical instrument in such an environment constitutes a definite

safety hazard.

•DO NOT REMOVE COVERS

No operator serviceable parts inside. Refer servicing to qualified personnel. To

prevent electrical shock do not remove covers.

•IN CASE OF DAMAGE

Instruments that appear damaged or defective should be made inoperative and

secured against unintended operation until they can be repaired by qualified service

personnel. Return the instrument to a Keysight Technologies sales or service office

for services and repair to ensure that safety features are maintained.

•USE ONLY THE SPECIFIC ACCESSORIES

Specific accessories satisfy the requirements for specific characteristics for using the

instrument. Use the specific accessories, cables, adapters, and so on for safety

reasons.

Otros manuales para B1505A

Tabla de contenidos

Otros manuales de Instrumento de medición de Keysight Technologies

Keysight Technologies

Keysight Technologies EXA N9010B Guía de inicio rápido

Keysight Technologies

Keysight Technologies 5061B Manual de usuario

Keysight Technologies

Keysight Technologies Streamline Series Manual de usuario

Keysight Technologies

Keysight Technologies E5868A Instrucciones de montaje

Keysight Technologies

Keysight Technologies MY53280000 Guía de inicio rápido

Keysight Technologies

Keysight Technologies 86120B Manual de usuario

Keysight Technologies

Keysight Technologies N9020B Manual

Keysight Technologies

Keysight Technologies M9203A Guía rápida

Keysight Technologies

Keysight Technologies N5221/2A Series Manual de usuario

Keysight Technologies

Keysight Technologies N5224A Manual de usuario

Keysight Technologies

Keysight Technologies E5260 Series Manual de usuario

Keysight Technologies

Keysight Technologies 34980A Manual de usuario

Keysight Technologies

Keysight Technologies N5244BU-679 Manual de usuario

Keysight Technologies

Keysight Technologies N5251A Series Manual de usuario

Keysight Technologies

Keysight Technologies B1500A Manual de instrucciones

Keysight Technologies

Keysight Technologies U2020 X Series Manual de usuario

Keysight Technologies

Keysight Technologies B2901A Manual de usuario

Keysight Technologies

Keysight Technologies P Series Manual de usuario

Keysight Technologies

Keysight Technologies N5245-60106 Manual de instalación y operación

Keysight Technologies

Keysight Technologies EXA N9010B Manual de instalación y operación

Keysight Technologies

Keysight Technologies W3301A Manual de usuario

Keysight Technologies

Keysight Technologies B2980A Series Manual de usuario

Keysight Technologies

Keysight Technologies E5055A SSA-X Manual de usuario

Keysight Technologies

Keysight Technologies 16197A Manual de operación

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario