Keysight Technologies Streamline Series Manual de usuario

Find us at www.keysight.com Page 1

Keysight Streamline Series

USB Vector Network Analyzers

P937xA 2-port, Up to 26.5 GHz

P500xA 2-port, Up to 20 GHz

Compact Form. Zero compromise.

Find us at www.keysight.com Page 2

Table of Contents

Keysight Streamline Series: Exceptional Performance in a Small Package ...................... 3

Keysight Streamline Series Vector Network Analyzer Configurations................................ 4

Test set options................................................................................................................ 4

Hardware options ............................................................................................................. 4

Application software ......................................................................................................... 5

Calibration options ........................................................................................................... 5

Accessories...................................................................................................................... 6

Measurement Application Software .................................................................................... 7

Automatic fixture removal (S97007A) .............................................................................. 7

Time domain analysis (S97010A) .................................................................................... 7

Basic Pulsed-RF measurements (S97025A) ................................................................... 7

Noise figure measurements with vector correction (S97029A)........................................ 8

Scalar mixer/converter measurements (S97082A).......................................................... 8

Embedded LO capability (S97084A)................................................................................ 8

Gain compression measurements (S97086A)................................................................. 9

Spectrum analysis (S97090A) ......................................................................................... 9

Multiport calibrated measurements (S97551A)................................................................ 9

Material measurements.................................................................................................. 10

N1930B Physical Layer Test System (PLTS) Software................................................. 10

Upgrading Your System .................................................................................................... 11

Measurement Accessories................................................................................................ 12

Cable and adapter sets.................................................................................................. 12

Calibration kits................................................................................................................ 13

For devices with 3.5 mm or SMA connectors ................................................................ 14

For devices with Type-N connectors.............................................................................. 18

For devices with 7 mm connectors ................................................................................ 22

For devices with waveguide........................................................................................... 22

Verification kits ............................................................................................................... 24

PC Requirements for USB VNA control............................................................................ 25

Literature Information ........................................................................................................ 25

Web Resources................................................................................................................. 25

Find us at www.keysight.com Page 3

Keysight Streamline Series: Exceptional Performance in a Small Package

Balance deadlines, productivity, budget and bench space with the Streamline Series. You’ll move

confidently across every stage of your product’s development lifecycle by leveraging accurate and

repeatable measurements, automated code capability, and a consistent, intuitive user experience. With

comprehensive Keysight Services including calibration, education and consulting, these instruments

enhance your solution to help you accelerate technology adoption and lower costs.

This configuration guide describes standard configurations, options, accessories, upgrade kits and

compatible peripherals for the Keysight Streamline Series USB vector network analyzer (VNA).

P937xA Series

P9370A

300 kHz to 4.5 GHz, 2-port

P9371A

300 kHz to 6.5 GHz, 2-port

P9372A

300 kHz to 9 GHz, 2-port

P9373A

300 kHz to 14 GHz, 2-port

P9374A

300 kHz to 20 GHz, 2-port

P9375A

300 kHz to 26.5 GHz, 2-port

P500xA Series

P5000A

9 kHz to 4.5 GHz, 2-port

P5001A

9 kHz to 6.5 GHz, 2-port

P5002A

9 kHz to 9 GHz, 2-port

P5003A

9 kHz to 14 GHz, 2-port

P5004A

9 kHz to 20 GHz, 2-port

Find us at www.keysight.com Page 4

Keysight Streamline Series Vector Network Analyzer Configurations

Model Description Test port connectors

P937xA Series

P9370A

300 kHz to 4.5 GHz, 2-port

3.5 mm (f)

P9371A

300 kHz to 6.5 GHz, 2-port

3.5 mm (f)

P9372A

300 kHz to 9 GHz, 2-port

3.5 mm (f)

P9373A

300 kHz to 14 GHz, 2-port

3.5 mm (f)

P9374A

300 kHz to 20 GHz, 2-port

3.5 mm (f)

P9375A

300 kHz to 26.5 GHz, 2-port

3.5 mm (f)

P500xA Series

P5000A

9 kHz to 4.5 GHz, 2-port

3.5 mm (f)

P5001A

9 kHz to 6.5 GHz, 2-port

3.5 mm (f)

P5002A

9 kHz to 9 GHz, 2-port

3.5 mm (f)

P5003A

9 kHz to 14 GHz, 2-port

3.5 mm (f)

P5004A

9 kHz to 20 GHz, 2-port

3.5 mm (f)

Test set options

Choose one of the frequency models, and one test set option for the P500xA Series. Option 2xx indicates

two test ports. To add options to a product, order the corresponding item number (P500xA-xxx).

Description 2-port Additional information

P500xA Series

Option 200

・

Not available for the P937xA Series

Hardware options

Description For P937xA

Series

For P500xA

Series

Additional information

Add pulse modulation

hardware N/A P500xA-021

This option enables the internal pulse modulator

on the analyzer’s source. S97025A application

software is required for pulsed-RF

measurements.

Add spectrum analysis

hardware

N/A P500xA-090

S97090A application software is required for

spectrum analysis.

Find us at www.keysight.com Page 5

Application software1

Description For P937xA

Series

For P500xA

Series

Additional information

Automatic fixture removal

S97007A

Time domain analysis

S97010A

Basic pulsed-RF

measurements

N/A S97025A

Requires hardware option 021.

Noise figure measurements

with vector correction

N/A S97029A

Standard receivers are used.

Scalar mixer/converter

measurements S97082A S97082A

Provides ability to independently set

the frequency of internal sources and

receivers, and to configure external

sources. Provides SMC measurement

class.

Embedded-LO capability

N/A

S97084A

Gain-compression

measurements

N/A S97086A

Spectrum analysis

N/A

S97090A

Requires hardware option 090.

Multiport calibrated

measurements S97551A S97551A

Provides multiport calibrated

measurements using up to two

instruments.

2,3,4

Calibration options

Description For P937xA

Series

For P500xA

Series

Additional information

ISO 17025 compliant

calibration

P937xA-1A7 P500xA-1A7

ANSI Z540 compliant

calibration

P937xA-A6J P500xA-A6J

Commercial calibration

certificate with test data

P937xA-UK6 N/A

1. Supported software license types: node-locked perpetual (1FP), node-locked 12 month (1FL). 1FP is the only

type that can be ordered as part of the instrument. The other types have to be ordered as separate items and

installed from the web aster the receipt of the instruments.

2. When configuring a multiport VNA using multiple USB VNAs, the Y1710A is recommended for each additional

multiport interconnection.

3. The P937xA and P500xA can not be combined in multiport configurations.

4. A 4-port ECal module (i.e. N4431/32/33) is recommended for multiport measurements (n > 4).

Find us at www.keysight.com Page 6

Accessories

Description For P937xA

Series

For P500xA

Series

Additional information

Accessory and tool kit Y1281A Y1281A

Includes the tools for SMA and SMB

connector removal

Rack mount kit Y1700A-001 Y1700A-001

Order Option 001 for 1-slot USB

instruments.

Multiple USB instruments

configuration kit

Y1701A-001 Y1701A-002

Includes interconnect cables for

configurations using two USB

instruments. Add one kit for each

additional USB instrument.

Y1701A-101 Y1701A-101

Includes latch kit for connecting two

USB instruments.

Hard transit case

Y1710A

PXI adapter module N/A Y1731A-001

Includes PXI module to monitor

control signals with the P500xA and

2 flexible control cables.

Find us at www.keysight.com Page 7

Measurement Application Software

Solid black series name indicates the feature is available on that series, while gray series name with

strikethrough indicates the feature ins not available on that series. For example:

P500xA Series: Available on P500xA series

P937xA Series:Not available on P937xA Series

Automatic fixture removal (S97007A)

P937xA Series P500xA Series

Many devices do not have coaxial connectors and are put in fixtures in order to measure them in a

coaxial environment. Accurately removing the effects of the fixture is required to get a good measurement

of the device under test (DUT). This application adds a powerful application wizard to guide you through

characterizing a fixture and removing it from the measurement. Devices can be single-ended or

differential. Files can be saved in a variety of formats for later use in ENA, PNA, PXI VNA, USB VNA,

ADS, and PLTS.

Time domain analysis (S97010A)

P937xA Series P500xA Series

This application enables the analyzer to view reflection and transmission responses in time or distance.

Use time domain to tune filters, gate out the response of fixtures and cables, characterize the impedance

of transmission lines and more.

Basic Pulsed-RF measurements (S97025A)

P937xA Series P500xA Series

This application enables internal pulse generators that can be used to control the internal pulse

modulators, and it provides an integrated pulse application that uses the wideband-detection method. The

software requires hardware option 021 pulse modulator hardware.

The pulse application provides an easy way to set up point-in-pulse measurements with pulse width as

narrow as 1 us, and pulse-profile measurements with 40 ns minimum timing resolution. Using the built-in

pulse modulators, the USB VNAs are complete pulsed-RF measurement solutions, eliminating the need

for external test sets and pulse generators. S97025A also controls external pulse generators and

modulators and can synchronize to external master pulses. The Y1731A PXI Adapter Module is

recommended if using external master pulses or external pulse modulators.

Find us at www.keysight.com Page 8

Noise figure measurements with vector correction (S97029A)

P937xA Series P500xA Series

This software application enables high-accuracy noise figure and noise-power measurements of

amplifiers utilizing Keysight’s unique vector-source-correction technique that uses a source-impedance

tuner to remove the effects of imperfect system-source match. This approach yields accuracy that

surpasses that provided by the Y-factor method and other cold-source implementations, especially for in-

fixture, on-wafer, and automated-test environments. A scalar-calibrated method is also available that

offers less accuracy but is faster and does not require an impedance tuner.

The instrument’s standard receivers are used for noise figure measurements with the S97029A. An

external preamplifier and filter(s) is required for devices with < 30 dB of excess noise (gain plus noise

figure in dB). S97029A controls Keysight N469x Series1ECal modules configured as impedance tuners

for use with the USB VNA.

For calibration, a standard mechanical cal kit or ECal module is required for the S-parameter portion of

the cal (an ECal used as a tuner cannot be shared for calibration). To calibrate a standard receiver for

noise figure measurements, a power meter is required. All calibration accessories must be ordered

separately.

Scalar mixer/converter measurements (S97082A)

P937xA Series P500xA Series

With a simple setup and calibration, this application delivers the highest accuracy for scalar conversion-

loss/gain measurements by combining one-port and power-meter calibrations to remove mismatch errors.

S97082A provides an intuitive and easy-to-use user interface for setting up mixer and converter

measurements, with single or dual conversion stages. It can control external signal generators for use as

LO signals. Supported external sources include the Keysight ESG, PSG, EXG, and MXG Series, as well

as other SCPI-controlled signal generators.

S97082A is compatible with S97084A, which enables measurements of converters with internal LOs.

Embedded LO capability (S97084A)

P937xA Series P500xA Series

This application tunes the analyzer’s receivers to the output frequency of the converter under test without

the need for access to internal LOs or a common reference signal. S97084A is intended to work with

S97082A measurement applications.

1. 8509x, N443x or N755xA Series ECal modules are not supported.

Find us at www.keysight.com Page 9

Gain compression measurements (S97086A)

P937xA Series P500xA Series

The gain compression application (GCA) provides input power, output power, gain, and phase at the

compression point of an amplifier over a specified frequency range. GCA’s SMART Sweep is very fast

and easy-to-use. GCA also includes a guided calibration that corrects for absolute power levels,

frequency response, and mismatch errors.

Spectrum analysis (S97090A)

P937xA Series P500xA Series

The spectrum analyzer (SA) application adds high-performance microwave spectrum analysis to USB

VNAs. With fast stepped-FFT sweeps resulting from optimized data processing, the SA application

provides quick spurious searches over broad frequency ranges. Simultaneous spectrum measurements

can be done using test and reference receivers. This multi-channel SA can be used with the internal

swept-signal generators for efficient measurements of spurious signals emanating from mixers and

frequency converters. The SA application employs source-power and receiver-response calibration as

well as fixture de-embedding, providing in-fixture and on-wafer spectrum measurements with the highest

level of accuracy. Optional external attenuators should be connected with the VNA’s test ports to avoid

receiver compression when measuring large signals.

The S97090A software requires option 090 spectrum analysis hardware.

Multiport calibrated measurements (S97551A)

P937xA Series P500xA Series

Keysight USB VNA offers a capability to extend the number of ports for your measurements by using up

to two instruments. When multiple instruments are used, they are configured for multiport operation. The

instruments may be identified by the firmware as one VNA by an external PC. At least one VNA

instrument connected to your PC must have one S97551A license to maintain N-port capabilities with

multiple instruments. The frequency of the multiport array is determined by the lowest frequency

instrument configured in the array. For example, a 4-port analyzer configuration using a P5000A (4.5

GHz) and a P5004A (20 GHz) would have a maximum frequency of 4.5 GHz when performing 4-port

measurements. This behavior extends to other measurement application software (S97xxxA). In a

multiport configuration, only one instrument must have a valid license for these capabilities to function in

multiport mode.

Each instrument is connected into the array with Keysight cables. A Y1701A Multiple USB instruments

configuration kit should be ordered for connection of two P937xA (with Y1701A-001) or two P500xA

instruments (with Y1701A-002). A single Y1281A accessory and tool kit should be ordered for easier

cable connections.

The P937xA and P500xA can not be combined to configure multiport VNAs due to hardware difference.

Find us at www.keysight.com Page 10

Figure 1: 4-port configuration using two P937xA VNAs

Material measurements

P937xA Series P500xA Series

The Keysight N1500A materials measurement suite streamlines the process of measuring complex

permittivity and permeability with a vector network analyzer. Various type of measurements, such as

transmission line and free space, arch reflectivity, resonant cavity, and coaxial probe are available as

options. The easy-to-use software guides the user through setup and measurement, instantly converting

S-parameter network analyzer data into the data format of your choice and displaying the results within

seconds. Results can be charted in a variety of formats: εr’, εr”, tand, μr’, μr”, tandμ, and Cole-Cole.

N1930B Physical Layer Test System (PLTS) Software

P937xA Series P500xA Series

The PLTS software platform has become an industry standard for calibration, measurement, and analysis

of linear passive interconnects such as cables, connectors, backplanes, and printed circuit boards.

Utilizing either a vector network analyzer (VNA) or a time domain reflectometer (TDR), fast and accurate

measurements can be obtained without in-depth knowledge of microwave measurement techniques.

Refer to www.keysight.com/find/plts or the technical overview (literature number 5989-6841EN) for more

details.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Keysight Technologies

Keysight Technologies

Keysight Technologies 34980A Manual de usuario

Keysight Technologies

Keysight Technologies E5052B Manual del propietario

Keysight Technologies

Keysight Technologies N524 A Series Manual de instalación y operación

Keysight Technologies

Keysight Technologies M9391A PXIe Manual de usuario

Keysight Technologies

Keysight Technologies N9321C Manual de usuario

Keysight Technologies

Keysight Technologies B2900A Series Manual de usuario

Keysight Technologies

Keysight Technologies E4981A Manual del propietario

Keysight Technologies

Keysight Technologies E5080B Manual de usuario

Keysight Technologies

Keysight Technologies B2900A Series Manual de usuario

Keysight Technologies

Keysight Technologies N5221/2A Series Manual de usuario

Keysight Technologies

Keysight Technologies 34972A Manual de usuario

Keysight Technologies

Keysight Technologies PD1000A Manual de usuario

Keysight Technologies

Keysight Technologies EXA N9010B Manual de instalación y operación

Keysight Technologies

Keysight Technologies N9030B Manual de instalación y operación

Keysight Technologies

Keysight Technologies FieldFox N9912A104 Manual de usuario

Keysight Technologies

Keysight Technologies MXA Series Manual de instalación y operación

Keysight Technologies

Keysight Technologies U4205A Manual de usuario

Keysight Technologies

Keysight Technologies N437 Series Instrucciones de instalación y funcionamiento

Keysight Technologies

Keysight Technologies M9300A Guía del usuario

Keysight Technologies

Keysight Technologies N5252A Manual de usuario

Keysight Technologies

Keysight Technologies 34134A Manual de usuario

Keysight Technologies

Keysight Technologies E4417A Manual de usuario

Keysight Technologies

Keysight Technologies P939 A Series Manual de usuario

Keysight Technologies

Keysight Technologies N9020A Manual de instalación y operación

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario