Keysight Technologies E5868A Instrucciones de montaje

E5868A and E5869A Additional Removable

Windows 10 SSDs for 1686x-Series Logic

Analyzers

INSTALLATION AND SETUP GUIDE

Notices

No part of this manual may be reproduced

in any form or by any means (including

electronic storage and retrieval or transla-

tion into a foreign language) without prior

agreement and written consent from

Keysight Technologies as governed by

United States and international copyright

laws.

Manual Part Number

E5869-97000

Edition

First Edition, September 2023

Printed in Malaysia

Published By:

Keysight Technologies

1900 Garden of the Gods Road

Colorado Springs, CO 80907 USA

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED "AS IS," AND IS

SUBJECT TO BEING CHANGED, WITHOUT

NOTICE, IN FUTURE EDITIONS. FURTHER,

TO THE MAXIMUM EXTENT PERMITTED BY

APPLICABLE LAW, KEYSIGHT DISCLAIMS

ALL WARRANTIES, EITHER EXPRESS OR

IMPLIED WITH REGARD TO THIS MANUAL

AND ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT LIMITED TO

THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. KEYSIGHT SHALL

NOT BE LIABLE FOR ERRORS OR FOR

INCIDENTAL OR CONSEQUENTIAL

DAMAGES IN CONNECTION WITH THE

FURNISHING, USE, OR PERFORMANCE OF

THIS DOCUMENT OR ANY INFORMATION

CONTAINED HEREIN. SHOULD KEYSIGHT

AND THE USER HAVE A SEPARATE

WRITTEN AGREEMENT WITH WARRANTY

TERMS COVERING THE MATERIAL IN THIS

DOCUMENT THAT CONFLICT WITH THESE

TERMS, THE WARRANTY TERMS IN THE

SEPARATE AGREEMENT WILL CONTROL.

Technology Licenses

The hardware and/or software described in

this document are furnished under a

license and may be used or copied only in

accordance with the terms of such license.

U.S. Government Rights

The Software is "commercial computer

software," as defined by Federal Acquisition

Regulation ("FAR") 2.101. Pursuant to FAR

12.212 and 27.405-3 and Department of

Defense FAR Supplement ("DFARS")

227.7202, the U.S. government acquires

commercial computer software under the

same terms by which the software is cus-

tomarily provided to the public. Accord-

ingly, Keysight provides the Software to

U.S. government customers under its stan-

dard commercial license, which is embod-

ied in its End User License Agreement

(EULA), a copy of which can be found at

http://www.key-

sight.com/find/sweula. The license set

forth in the EULA represents the exclusive

authority by which the U.S. government

may use, modify, distribute, or disclose the

Software. The EULA and the license set

forth therein, does not require or permit,

among other things, that Keysight: (1) Fur-

nish technical information related to com-

mercial computer software or commercial

computer software documentation that is

not customarily provided to the public; or

(2) Relinquish to, or otherwise provide, the

government rights in excess of these rights

customarily provided to the public to use,

modify, reproduce, release, perform, dis-

play, or disclose commercial computer

software or commercial computer software

documentation. No additional government

requirements beyond those set forth in the

EULA shall apply, except to the extent that

those terms, rights, or licenses are explic-

itly required from all providers of commer-

cial computer software pursuant to the FAR

and the DFARS and are set forth specifically

in writing elsewhere in the EULA. Keysight

shall be under no obligation to update,

revise or otherwise modify the Software.

With respect to any technical data as

defined by FAR 2.101, pursuant to FAR

12.211 and 27.404.2 and DFARS 227.7102,

the U.S. government acquires no greater

than Limited Rights as defined in FAR

27.401 or DFAR 227.7103-5 (c), as appli-

cable in any technical data. 52.227-14

(June 1987) or DFAR 252.227-7015 (b)(2)

(November 1995), as applicable in any

technical data.

Safety Notices

CAUTION

A CAUTION notice denotes a hazard.

It calls attention to an operating pro-

cedure, practice, or the like that, if

not correctly performed or adhered

to, could result in damage to the

product or loss of important data. Do

not proceed beyond a CAUTION

notice until the indicated conditions

are fully understood and met.

WARNING

A WARNING notice denotes a hazard.

It calls attention to an operating pro-

cedure, practice, or the like that, if

not correctly performed or adhered

to, could result in personal injury or

death. Do not proceed beyond a

WARNING notice until the indicated

conditions are fully understood and

met.

2 E5868A and E5869A Additional Removable SSDs for 16860-Series Logic Analyzers Installation Guide

E5868A and E5869A Additional Removable SSDs for 16860-Series Logic Analyzers Installation Guide 3

Safety Summary

The following general safety precautions must be observed during all phases of operation

of this product. Failure to comply with these precautions or with specific warnings or

operating instructions in the product manuals violates safety standards of design,

manufacture, and intended use of the instrument. Keysight Technologies assumes no

liability for the customer's failure to comply with these requirements.

General Do not use this product in any manner not specified by the manufacturer. The protective

features of this product may be impaired if it is used in a manner not specified in the

operation instructions.

Before Applying Power Verify that all safety precautions are taken. Make all connections to the product before

applying power.

Do Not Operate in an

Explosive Atmosphere

Do not operate the product in the presence of flammable gases or fumes.

Cleaning Clean the outside of the product with a soft, lint-free cloth. Do not use detergent or

chemical solvents or too much liquid to avoid damaging sensitive electronic components.

Do not attempt to clean internally.

In Case of Damage Products that appear damaged or defective should be made inoperative and secured

against unintended operation. Return the product to a Keysight Sales and Service Office.

4 E5868A and E5869A Additional Removable SSDs for 16860-Series Logic Analyzers Installation Guide

E5868A and E5869A Additional Removable SSDs for 16860-Series Logic Analyzers Installation Guide 5

Contents

1Overview

E5868A and E5869A Additional Removable SSDs 8

When to Use which Removable SSD 8

Handling the E5868A and E5869A SSDs 9

2 Installing the Additional Removable SSD

Step 1. Back up Data for Transfer to the New SSD 11

Step 2. Power Down the 1686x Logic Analyzer 11

Step 3. Remove the Currently Installed SSD 12

Step 4. Install the New SSD 13

Step 5. Power on the 1686x Logic Analyzer 14

Step 6. Perform the first-time Setup Steps 14

Step 7. Restore Data 14

Step 8. Install any Additional Application Software 14

Resolve any Issues with the Installation 14

6 E5868A and E5869A Additional Removable SSDs for 16860-Series Logic Analyzers Installation Guide

Contents

E5868A and E5869A Additional Removable SSDs for

16860-Series Logic Analyzers

Installation Guide

1Overview

E5868A and E5869A Additional Removable SSDs / 8

Handling the E5868A and E5869A SSDs / 9

8 E5868A and E5869A Additional Removable SSDs for 16860-Series Logic Analyzers Installation Guide

1 Overview

E5868A and E5869A Additional Removable SSDs

The 1686x-series logic analyzers have a removable Solid State Drive (SSD)

imaged with Windows 10 operating system, Logic and Protocol Analyzer

application software, and any optional application software ordered with

the logic analyzer.

You can remove and replace this SSD with the additional removable SSD

without disassembling the logic analyzer. This guide describes how to

remove and replace the SSD.

When to Use which Removable SSD

The following two models of additional removable SSDs are available for

1686x-series logic analyzers.

E5868A E5869A

E5868A has the drive image required for 1686x-series

logic analyzers with the older M900 motherboard.

E5869A has the drive image required for 1686x-series

logic analyzers with the newer M910 motherboard.

This SSD has a lighter gray color panel with black text. This SSD has a darker gray color panel with white text.

CAUTION

To ensure that you are using the correct model of removable

SSD for your 1686x logic analyzer, match the panel color of

the additional SSD with the panel color of the SSD you are

replacing.

E5868A and E5869A Additional Removable SSDs for 16860-Series Logic Analyzers Installation Guide 9

Overview 1

Handling the E5868A and E5869A SSDs

For the integrity of the data on your hard disk drive, Keysight

recommends that you take the precautions described in this topic

while handling and storing the hard disk drives:

• Store unused SSD in the shipping container.

• Protect the SSD from electrostatic discharge (ESD).

• Protect the SSD from physical shock.

• Protect the SSD Against Contamination of the Edge Connector

CAUTION

Electrostatic discharge can damage electronic

components. Use grounded wrist straps and mats

when handling electronic components.

CAUTION

While operating, do not expose the SSD to more

than 5 to 500 Hz at 0.3 g rms.

CAUTION

The SSD edge connector is sensitive to ESD and

mechanical or material contamination. Take

precautions to protect the edge connector from

contamination during handling and storage.

E5868A and E5869A Additional Removable Windows 10

SSDs for 16860-Series Logic Analyzers

Installation Guide

2Installing the Additional

Removable SSD

Step 1. Back up Data for Transfer to the New SSD / 11

Step 2. Power Down the 1686x Logic Analyzer / 11

Step 3. Remove the Currently Installed SSD / 12

Step 4. Install the New SSD / 13

Step 5. Power on the 1686x Logic Analyzer / 14

Step 6. Perform the first-time Setup Steps / 14

Step 7. Restore Data / 14

Step 8. Install any Additional Application Software / 14

CAUTION

Electrostatic discharge can damage electronic components. Use

grounded wrist straps and mats when handling electronic components.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Keysight Technologies

Keysight Technologies

Keysight Technologies N9020B Manual

Keysight Technologies

Keysight Technologies N9340B Manual de usuario

Keysight Technologies

Keysight Technologies U8903B Manual de usuario

Keysight Technologies

Keysight Technologies IntegraVision PA2200 Series Manual de servicio

Keysight Technologies

Keysight Technologies N9029AV01-V19 Manual de usuario

Keysight Technologies

Keysight Technologies N432A Manual de usuario

Keysight Technologies

Keysight Technologies E5072A Manual de usuario

Keysight Technologies

Keysight Technologies S9106AC-2IF Guía del usuario

Keysight Technologies

Keysight Technologies N9020A Manual de instalación y operación

Keysight Technologies

Keysight Technologies N9030B Manual de instalación y operación

Keysight Technologies

Keysight Technologies 34972A Manual de usuario

Keysight Technologies

Keysight Technologies 34980A Manual de usuario

Keysight Technologies

Keysight Technologies N6705C Manual de servicio

Keysight Technologies

Keysight Technologies M8131A Manual de usuario

Keysight Technologies

Keysight Technologies M9485A Guía del usuario

Keysight Technologies

Keysight Technologies B2981A Guía de instalación

Keysight Technologies

Keysight Technologies P Series Manual de usuario

Keysight Technologies

Keysight Technologies B2901A Manual de usuario

Keysight Technologies

Keysight Technologies FieldFox N9913A Manual de usuario

Keysight Technologies

Keysight Technologies N7020A Manual de usuario

Keysight Technologies

Keysight Technologies N4373D Manual de usuario

Keysight Technologies

Keysight Technologies B1500A Manual de instrucciones

Keysight Technologies

Keysight Technologies Agilent Technologies PXI Express M9202A Guía del usuario

Keysight Technologies

Keysight Technologies X Series Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario