CTA PAD-TPADM Manual de usuario
x1
Universal Tablet and Phone Adjustable Desk Mount
PAD-TPADM
INSTALLATION - MANUAL
CONTENTS: BC
D
F
E
A
x1 x1
x1
x2
2. Attaching Articulating Arms to Base
INSTALLATION:
1. Attaching Phone Holder to Articulating Arm
3. Attaching Device to Holder Optional. Attaching Adhesive Pads
1A. Rotate in the phone holder
in the articulating arm adapter
until securely tightened.
2A. Slide the articulating arm into the dedicated mount location
on the base. Rotate in screw until moderately tightened with
your hand, no extra tools needed. Repeat to the other side.
D
C
3A. Use both hands to extend
the holders. Make sure that your
device size is compatible with
each of the holder.
Stick the (4) adhesives (F) below the base as shown for added
stability as needed.
3B. Insert your device inside the holder
and release it to contract it.
E
A
B
B
D
x4
x4
Portrait & Landscape
Adjustability
Tilt
Adjustability
Rotate each holder to the desired orientation. Rotate each joint to create the desired setup.
Base Swivel Adjustability
Rotate to the desired angle. Securely tighten the
bottom screw to create a more fixed setup.
Cable Management
Use hooks to route cable out of the way.
Tabla de contenidos
Otros manuales de Rack y soporte de CTA
CTA
CTA PAD-VADMWE Manual de usuario
CTA
CTA PAD-SWM Manual de usuario
CTA
CTA PAD-SCGS Manual de usuario
CTA
CTA PAD-FTSU Manual de usuario
CTA
CTA PAD-PF1ICC Manual de usuario
CTA
CTA PAD-TAM Manual de usuario
CTA
CTA PAD-ASKP Manual de usuario
CTA
CTA PAD-CHKWM10 Manual de usuario
CTA
CTA PAD-VPOS1W Manual de usuario
CTA
CTA PAD-CHKBM10 Manual de usuario
CTA
CTA PAD-KMS Manual de usuario
CTA
CTA ADD-PARAFSV Manual de usuario
CTA
CTA ADD-FS2VDMB Manual de usuario
CTA
CTA PAD-SHFS Manual de usuario
CTA
CTA PAD-PARAF1 Manual de usuario
CTA
CTA ADD-CPOLEGN Manual de usuario
CTA
CTA PAD-PARAFDC Manual de usuario
CTA
CTA ADD-PARAFS Manual de usuario
CTA
CTA PAD-CFWM Manual de usuario
CTA
CTA ADD-ADMA Manual de usuario
