Avenview HDMI-C5SP-8SRSR Manual de usuario

www.avenview.com

2X8 HDMI 1.3 Extender / Splitter over

Single CAT5

Model #: HDMI-C5SP-8SRSR

The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with

respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any

time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in

Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products

including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.

Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.

www.avenview.com

Table of Contents

Section 1: Getting Started ...................................................................................................................... 3

1.1 Important Safeguards ............................................................................................................ 3

1.2 Safety Instructions ................................................................................................................. 3

1.3 Regulatory Notices Federal Communications Commission (FCC) ......................................... 4

1.4 Introduction ........................................................................................................................... 4

1.5 Package Contents................................................................................................................... 7

1.6 Before Installation.................................................................................................................. 7

1.7 Panel Description................................................................................................................... 8

1.7.1 Rear Panel ............................................................................................................................. 8

1.7.3 Dip Switch.............................................................................................................................. 9

1.7.4 EDID Learning ........................................................................................................................ 9

1.7.5 EQ Level Control.................................................................................................................... 9

1.7.6 HDMI Output Format Selection........................................................................................... 10

1.8 Installation ........................................................................................................................... 11

Section 2: Specifications....................................................................................................................... 12

www.avenview.com

Section 1: Getting Started

1.1 Important Safeguards

Please read all of these instructions carefully before you use the device. Save this manual for future

reference.

What the warranty does not cover

Any product, on which the serial number has been defaced, modified or removed.

Damage, deterioration or malfunction resulting from:

Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized

product modification, or failure to follow instructions supplied with the product.

Repair or attempted repair by anyone not authorized by us.

Any damage of the product due to shipment.

Removal or installation of the product.

Causes external to the product, such as electric power fluctuation or failure.

Use of supplies or parts not meeting our specifications.

Normal wear and tear.

Any other causes which does not relate to a product defect.

Removal, installation, and set-up service charges.

1.2 Safety Instructions

The Avenview HDMI-C5SP-8SR HDMI 1.3 Extender / Splitter over CAT5 Cascading Distribution Amplifier has

been tested for conformance to safety regulations and requirements, and has been certified for international

use. However, like all electronic equipment’s, the HDMI-C5SP-8SR should be used with care. Read the

following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the

unit.

Do not dismantle the housing or modify the module.

Dismantling the housing or modifying the module may result in electrical shock or burn.

Refer all servicing to qualified service personnel.

Do not attempt to service this product yourself as opening or removing housing may expose you to

dangerous voltage or other hazards

Keep the module away from liquids.

Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid

falls or spills on to the housing, unplug the module immediately.

Have the module checked by a qualified service engineer before using it again.

Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before

cleaning.

www.avenview.com

1.3 Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference in a residential installation.

Any changes or modifications made to this equipment may void the user’s authority to operate this

equipment.

1.4 Introduction

The Avenview HDMI-C5SP-8SR HDMI 1.3 over Single CAT5 Cascading Distribution Amplifier provides the most

flexible solution by which the high definition video and high quality audio can be transmitted to different

locations over a long distance. The devices are cascadable, allowing you to extend HDMI compliant displays

almost anywhere. The 2 input HDMI source (only 1 input can be used at a time) can be duplicated and

distributed to up to 8 HDMI enable displays through cost effective Cat-5/5e cables and RJ-45 to HDMI

mini-extenders HDMI-C5-R-M. With the built in equalization, the input HDMI cable can be extended up to 20

meters (66 feet) long under Full HD, and make the overall transmission distance superior than regular HDMI

splitters or matrix switches in the market.

-Silicon Image chipset embedded for best quality, compatibility and reliability

-HDMI 1.3c compliant

-HDCP compliant

-Regenerates the HDMI signal

-Acts as 2X1 HDMI Switch and 1X8 HDMI over CAT5 Splitter

-HDMI video distribution to up to 7 displays and one CAT5e Receiver or cascade to another

HDMI-C5SP-8SR

-Supports default HDMI EDID and has the ability to learn the EDID of the displays

-Input up to 15m (50ft) using HDMI cables

-Extends up to 60m (200ft) (720p / 1080i) of output CAT5/6 cable

-Outputs up to 15m (50ft) using HDMI cables

-Pure unaltered uncompressed 7.1ch digital HDMI over LAN cable transmission

-Allows cascading

-1U rack mountable with interlocking power adapter for fixedness

-Perfectly integrated with other HDMI-C5XD Series products

www.avenview.com

1.5 Package Contents

Before you start the installation of the converter, please check the package contents.

-HDMI-C5SP-8SR x 1

-Rack-mounting ears x 2

-Power Adapter x 1

-User’s Manual x 1

1.6 Before Installation

Put the product in an even and stable location. If the product falls down or drops, it may cause an

injury or malfunction.

Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high

humidity.

Use the DC power adapter with correct specifications. If inappropriate power supply is used then it

may cause a fire.

Do not twist or pull by force ends of the optical cable. It can cause malfunction.

www.avenview.com

1.7 Panel Description

1.7.1 Rear Panel

1 2 3 4 5 6 7

1. DIP Switches (details below)

2. EQ Level

3. CAT-5 IN: HDMI Signal In from

HDMI-C5SP-SR or HDMI-C5XD-S

4. HDMI IN

5. HDMI Output over RJ45

6. HDMI Output (1 –7)

7. Power Jack

www.avenview.com

1.7.3 Dip Switch

DIP Switch Position

Video

Audio

Description

PIN # 1

PIN # 2

OFF 

1080p

Stereo1

Default Mode2:Up to 1080p & Stereo output.

OFF 

ON 

720p/1080i

Stereo

Safe Mode3:Forces system to output at 720p/1080i

with Stereo Audio.

ON 

OFF 

Bypass4

Bypass

EDID Learning Mode5:for learning EDID from the

display while playing any received HDMI Audio format.

ON 

Bypass

Stereo

EDID Learning & Stereo Mode: For learning EDID from

the display while enforcing stereo output.

1.7.4 EDID Learning

1. Power up the HDMI-C5SP-8SR. Connect to HDMI OUT7 with the display you want the HDMI-C5SP-8SR

to learn its EDID.

2. The HDMI-C5SP-8SR is only bound to learn the EDID from the display for the HDMI source device

connected to HDMI IN2. For HDMI signal input at RJ45 IN1, please use the transmitting device that

sends the HDMI signals over CAT5 to the HDMI Signal IN1 of the HDMI-C5SP-8SR to learn the EDID of

the display.

3. To learn the display’s EDID for source device connected to HDMI IN2, pull both DIP switch pin#1 &

pin#2 up-and-down to stay at ON[]-ON[] and wait for about 5 seconds to complete the EDID learning

process. You DON’T NEED to pull up the DIP switch again unless you want to learn another display’s

EDID by pulling both DIP switch pin#1 & pin#2 up-and-down one more time.

1.7.5 EQ Level Control

In order to adapt the CAT5 cable, HDMI-C5SP-8SR offers 8-level equalization control on the received HDMI

signal level. 0-to-7 = strongest-to-weakest signal level for respective transmission length [long to short]. It is

recommended to switch from 7 to 0 to find the optimal visual experience.

1 If the HDTV shows video but without audio, please try to set audio mode to stereo

2 Factory default: Pin#1-OFF[



], Pin#2- OFF[



] for 1080p with stereo.

3 If you encounter any unsolved audio/video output problem during system installation, please turn to

Safe Mode (Pin#1- -

check.

4 Bypass means the matrix will maintain playing the original format of HDMI signals in video and perhaps

audio. By setting at this mode, the users may encounter compatibility issue among different kinds of HDMI

sources and displays. If you cannot get the audio and/or video output normally at the system installation,

please change the DIP switch setting to default mode or even safe mode to verify the functionality of the

device.

seconds. The EDID learning procedure will be finished. If you want to learn the EDID from another HDTV, you

must set Pin#1 at OFF first and repeat this procedure.

www.avenview.com

1.7.6 HDMI Output Format Selection

When input signal exists, the output format LED turns on. If the input HDMI source is HDMI 1.3 format, you

can set the output format to HDMI 1.2 mode and Red LED will be on. If the input HDMI source is HDMI 1.2, the

output format is always set to HDMI 1.2. The main purpose of lower the HDMI 1.3 resolution [36~48-bit color

depth] to HDMI 1.2 [24-bit color depth] is to increase the transmission distance without creating noticeable

video quality distortion still at 1080p. By pressing the push-in button, users can enforce the HDMI output at

HDMI 1.2 format for longer transmission to the display. The HDMI-C5SP-8SR cannot upgrade the HDMI 1.2

source content to become HDMI 1.3 format.

Tabla de contenidos

Otros manuales de Extensor de Avenview

Avenview

Avenview FO-DVI-1080LC-Set Manual de usuario

Avenview

Avenview C-USB-HDM Manual de usuario

Avenview

Avenview VGA-C5RS-SET Manual de usuario

Avenview

Avenview DVI-C5-R Manual de usuario

Avenview

Avenview HDMI-C5-IR-SET Manual de usuario

Avenview

Avenview DVI-C5-LC-R Manual de usuario

Avenview

Avenview VGA-C5-SP-4 Manual de usuario

Avenview

Avenview FO8K-DP MM Series Manual de usuario

Avenview

Avenview Cat5 Manual de usuario

Avenview

Avenview HDM3D-C5SP-4 Manual de usuario

Avenview

Avenview HDM-SHAREPRO-IP Manual de usuario

Avenview

Avenview FO-HDSDI-SET Manual de usuario

Avenview

Avenview FO-DVI-XX-MM Manual de usuario

Avenview

Avenview HDM-C5SP-8 Manual de usuario

Avenview

Avenview FO-HDM2-T4K-SET Manual de usuario

Avenview

Avenview HBT-C6POE-SET Manual de usuario

Avenview

Avenview HDM-C6IP-SET Manual de usuario

Avenview

Avenview C5-USB-200 Manual de usuario

Avenview

Avenview HDM-C6VWIP-SET Manual de usuario

Avenview

Avenview USB-C6-50M Manual de usuario

Avenview

Avenview HDMI-C5-S Manual de usuario

Avenview

Avenview FO-DVI-DL-330 Series Manual de usuario

Avenview

Avenview FO-HDMI-1000M-EMI Manual de usuario

Avenview

Avenview W-HDM3D-100-SET Manual de usuario

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario