Avenview FO-HDMI-SET Manual de usuario
www.avenview.com
1
HDMI Extender over Fiber Optic
User’s Guide
Models
FO-HDMI-SET
© 2008 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations
or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to
specifications and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual
property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes
no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied
warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly
prohibited.
www.avenview.com
2
Table of Contents
Section 1: Getting Started...................................................................................................................... 3
1.1 Important Safeguards ............................................................................................................ 3
1.2 Safety Instructions ................................................................................................................. 3
1.3 Regulatory Notices Federal Communications Commission (FCC) ......................................... 3
1.4 Introduction ........................................................................................................................... 4
1.5 Package Contents................................................................................................................... 4
1.6 Before Installation.................................................................................................................. 4
1.7 Installation ............................................................................................................................. 5
1.8 General Troubleshooting ....................................................................................................... 5
Section 2: Specifications......................................................................................................................... 6
2.1 Signal Pin Assignment .................................................................................................................. 6
www.avenview.com
3
Section 1: Getting Started
1.1 Important Safeguards
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized
product modification, or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
1.2 Safety Instructions
Do not dismantle the housing or modify the module.
Dismantling the housing or modifying the module may result in electrical shock or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing housing may expose you to
dangerous voltage or other hazards
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid
falls or spills on to the housing, unplug the module immediately.
Have the module checked by a qualified service engineer before using it again.
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
www.avenview.com
4
1.4 Introduction
Avenview FO-HDMI-SET consists of a Transmitter and Receiver that lets you extend HDMI signal from DVD
Player, Blu-ray Player Set-top box, console systems or other video equipments over fiber optical signal without
any signal degradation.
-High Speed and long distance transmission by Optical fiber (LC type Multi-Mode 4-ch fiber.
-Extends up to 100 meters (330 feet)
-Compatible with HDMI 1.3 Standard
-Backward compatibility with DVI Standard 1.0
-Supports HDCP compliant device
-Supports up to 1080p for HDTV and UXGA (1600 x 1200) resolution
-DDC and DEC signal line is transmitted by copper line (CAT5) between internal and external power
1.5 Package Contents
Before you start the installation of the converter, please check the package contents.
-Receiver x 1
-Transmitter x1
-Power Adapter (+5VDC, 1.2A) x1
-Copper male to male HDMI Cable (-.5m) x2
-User’s Manual
1.6 Before Installation
Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it
may cause a fire.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
www.avenview.com
5
1.7 Installation
To setup Avenview FO-HDMI-SET follow these steps for connecting to a device:
1. Power off display source such as DVD Player, Set-top box
2. Connect the enclosed copper HDMI cable into each display source and display
3. Connect copper HDMI cable which is attached to display source into FO-HDMI-SET Transmitter
4. Connect Transmitter to the HDMI cable (course) and Receiver to HDMVI Cable (display)
5. Connect the Optical cable (4ch-LC standard connector) between Transmitter and Receiver by order
no 1, 2, 3, 4
6. Connect the UTP cable (RJ45 connector) for DDC
7. Power on the source and display (check the LED light on of Transmitter and Receiver)
1.8 General Troubleshooting
Problem
Possible Solution
No Image
Check if connection to the computer and the monitor are
correct.
Check length of the cable between Transmitter and Receiver
Screen Defects Appear
This product supports up to UXGA resolution.
Check the DVI connection
Check the maximum resolution range of the graphics card.
If there is no LED light on, insert the enclosed external power adapter into
Transmitter.
www.avenview.com
6
Section 2: Specifications
Item
Description
Video Bandwidth
165MHz (Single Link)
Video Input
1 Single Link HDMI
Input Connector
1 HDMI Type A Receptacle
Video Output
1 Single Link HDMI
Power
5V 1.2A DC
Power Consumption
0.55Watt
Output Connector
1HDMI Type A Receptacle
Maximum Supported
Resolution
Up to 1080p
UXGA 1600 x 1200 @ 60Hz
Maximum Cable
Length
100 meters (330 feet)
Optical
Optical Source
850nm VCSEL
O/E Converter
PIN Photo Diode
Fiber Type
Multi-Mode Fiber
Environmental
Operation
0˚to 50˚C Degree
2.1 Signal Pin Assignment
Pin
Signal
Pin
Signal
1
TMDS Data 2+
2
TMDS Data2 Shield
3
TMDS Data 2-
4
TMDS Data 1+
5
TMDS Data 1 Shield
6
TMDS Data 1-
7
TMDS Data 0+
8
TMDS Data0 Shield
9
TMDS Data 0-
10
TMDS Clock+
11
TMDS Clock Shield
12
TMDS Clock-
13
CEC
14
Reserved (N.C. on device)
15
SCL
16
SDA
17
DDC/CEC Ground
18
+5V Power
19
Hot Plug Detect
www.avenview.com
7
Disclaimer
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the
operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of
Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of
anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the
Avenview hardware, software, or other products and documentation provided herein.
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,
function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties
regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and
non-infringement.
Tabla de contenidos
Otros manuales de Extensor de Avenview
Avenview
Avenview HDM-C5SP-4 Manual de usuario
Avenview
Avenview HDM-C5-3X-SET Manual de usuario
Avenview
Avenview HDM3D-C53X-SET Manual de usuario
Avenview
Avenview VGA-C5-SP-4 Manual de usuario
Avenview
Avenview FO-HDM-IP4K-SET Manual de usuario
Avenview
Avenview HDMI-C5-3-SET Manual de usuario
Avenview
Avenview FO-HDM-1000M-EMI Manual de usuario
Avenview
Avenview FO-HDMI-XX-MM Manual de usuario
Avenview
Avenview FO-HDM4K-200-EMIX Manual de usuario
Avenview
Avenview HDSD FO-HDSDI-L-SET Manual de usuario
Avenview
Avenview FO-HDSDI-SET Manual de usuario
Avenview
Avenview HDM-C6VWIP-SET Manual de usuario
Avenview
Avenview VTS-C5-R Manual de usuario
Avenview
Avenview HDM-SHAREPRO-IP Manual de usuario
Avenview
Avenview HDMI-C5-4 Manual de usuario
Avenview
Avenview VGA-C5ARS-SET Manual de usuario
Avenview
Avenview C5-USB-200 Manual de usuario
Avenview
Avenview HDM-SHAREPRO-IP Manual de usuario
Avenview
Avenview DVI-C5-LC-R Manual de usuario
Avenview
Avenview HBT-C6IR-SET Manual de usuario
