Avenview FO-DVI-1000M-EMIX Manual de usuario

www.avenview.com

DVI Extender over Single Fiber Optic

Cable with Self-Detecting EDID

and EMI Shielding

Model #: FO-DVI-1000M-EMIX

The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with

respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any

time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in

Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products

including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.

Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.

www.avenview.com

Table of Contents

Section 1: Getting Started ...................................................................................................................... 3

1.1 Important Safeguards ............................................................................................................ 3

1.2 Safety Instructions ................................................................................................................. 3

1.3 Regulatory Notices Federal Communications Commission (FCC) ......................................... 4

1.4 Introduction ........................................................................................................................... 4

1.5 Package Contents................................................................................................................... 4

1.6 Before Installation.................................................................................................................. 4

1.7 Installation ............................................................................................................................. 5

1.8 Troubleshooting..................................................................................................................... 5

1.9 Caution................................................................................................................................... 6

Section 2: Specifications......................................................................................................................... 7

2.1 Case Dimensions .......................................................................................................................... 8

2.2 Absolute Maximum Ratings ......................................................................................................... 9

2.3 Electrical Specifications................................................................................................................ 9

2.3.1 Transmitter Module .............................................................................................................. 9

2.3.1 Receiver Module ................................................................................................................. 10

2.4 Signal Pin Assignment ................................................................................................................ 10

2.5Optical Fiber Cable ...................................................................................................................... 11

www.avenview.com

Section 1: Getting Started

1.1 Important Safeguards

Please read all of these instructions carefully before you use the device. Save this manual for future

reference.

What the warranty does not cover

Any product, on which the serial number has been defaced, modified or removed.

Damage, deterioration or malfunction resulting from:

Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product

modification, or failure to follow instructions supplied with the product.

Repair or attempted repair by anyone not authorized by us.

Any damage of the product due to shipment.

Removal or installation of the product.

Causes external to the product, such as electric power fluctuation or failure.

Use of supplies or parts not meeting our specifications.

Normal wear and tear.

Any other causes which does not relate to a product defect.

Removal, installation, and set-up service charges.

1.2 Safety Instructions

The Avenview FO-DVI-1000M-EMIX, DVI Extender over Fiber Optic has been tested for conformity to safety

regulations and requirements, and has been certified for international use. However, like all electronic

equipment’s, the FO-DVI-1000M-EMIX should be used with care. Read the following safety instructions to

protect yourself from possible injury and to minimize the risk of damage to the unit.

Do not dismantle the housing or modify the module.

Dismantling the housing or modifying the module may result in electrical shock or burn.

Refer all servicing to qualified service personnel.

Do not attempt to service this product yourself as opening or removing housing may expose you to

dangerous voltage or other hazards

Keep the module away from liquids.

Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid

falls or spills on to the housing, unplug the module immediately.

Have the module checked by a qualified service engineer before using it again.

Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before

cleaning.

www.avenview.com

1.3 Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference in a residential installation.

Any changes or modifications made to this equipment may void the user’s authority to operate this

equipment.

1.4 Introduction

Avenview FO-DVI-1000M-EMIX DVI Extender over Fiber lets you extend digital flat panel signal up to 500

meters (1650 feet) at 1920 x 1200 and 1000 meters (3300 feet) at 1280 x 1024 away from host by TMDS digital

signal and EDID transmission with only 1 fiber.

-High Speed and long distance transmission by SC type Multi-Mode 1 fiber

-R, G, B, Clock signal is transmitted by 1 Multi-Mode optical Fiber

-EDID data is transmitted by 1 Multi-Mode optical Fiber

-Supports 12bit deep color

-Standard DVI plug and SC Fiber connector

-Supports up to WUXGA (1920 x 1200) resolution

-HDCP compliant

-Optional external power supply (Automatic Power switch is included)

1.5 Package Contents

Before you start the installation of FO-DVI-1000M-EMIX, please check the package contents.

-Transmitter x 1

-Receiver x 1

-Power Adapter (5VDC, 2A) x 1

User’s Manual x 1

1.6 Before Installation

Put the product in an even and stable location. If the product falls down or drops, it may cause an

injury or malfunction.

Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high

humidity.

Use the DC power adapter with correct specifications. If inappropriate power supply is used then it

may cause a fire.

Do not twist or pull by force ends of the optical cable. It can cause malfunction.

www.avenview.com

1.7 Installation

This product is composed of a Transmitter and a Receiver. The Transmitter should be connected to the

computer’s DVI Port and the Receiver should be connected the DVI Port of the digital display device.

Avenview FO-DVI-1000M-EMIX Transmitter / Receiver is designed to be used with SC type standard optical

cable (Multi-Mode optical fiber: 50/125, 62.5/125um).

Avenview FO-DVI-1000M-EMIX is designed to self-detect the resolution of the monitor and change the

resolution accordingly. Follow these steps for connecting to a device:

1. Power on your Display

2. Connect Transmitter to the DVI Source and Receiver to the Display.

3. Connect the optical fiber between Transmitter and Receiver.

4. Connect DC power to the Receiver

5. Restart the computer.

1.8 Troubleshooting

Problem

Possible Solution

No Image

Check if the PC Power is on

Check if connection to the computer and the monitor are

correct.

Turn the PC Power off and on again.

Screen Defects Appear

This product supports up to WUXGA resolution.

Check the maximum resolution range of the graphics card.

www.avenview.com

1.9 Caution

1. Do not put heavy object on top of the FO-DVI-1000M-EMIX. It may cause product malfunction.

2. Put the product on even and stable location. If the product falls down or dropped, it may get

damaged.

3. Keep away from high temperature (over 50°C), low temperature (under 0°C) or high humidity. It may

cause a fire and injury by electrical shock.

4. Use DC power adapter with correct specification. Otherwise it may cause fire.

5. Do not twist or pull by force either ends of the optical cable. It can cause malfunction. Minimum

bending diameter is 75mm.

6. Use the multimode (50/125um, 62.5/125um) optical fiber.

www.avenview.com

Section 2: Specifications

Item

Description

Units

FO-DVI-1000M-EMIX (Transmitter)

FO-DVI-1000M-EMIX (Receiver)

Unit Description

DVI Transmitter over Fiber Optic

DVI Receiver over Fiber

DVI Compliance

DVI 1.0

HDCP Compliance

HDCP 1.1

Video Bandwidth

2.25 Gbps Single Link

Supported Resolution &

Distance

WUXGA 1920 x 1200 @ 500 meters ( 1650 feet)

UXGA 1600 x 1200 @ 700 meters (2300 feet)

SXGA 1280 x 1024 @ 1000 meters (3300 feet)

Optical Converter

4 Ch 850 nm Transmit OSA

911nm, 1 Ch VCSEL

980nm, 1 Ch PIN P/D Diode

4 Ch 850 nm Transmit OSA

911nm, 1 Ch VCSEL

980nm, 1 Ch PIN P/D Diode

DVI Connector

24 pin DVI-D Plug

Optical Connector

1 SC Connector

Fiber Type

50/125 µm Multi-mode glass fiber

Power Consumption

1.0W (max)

0.75W (max)

Power Supply

100 ~ 240V 5V 2A DC

Dimensions (L x W x H)

2.4” x 1.5” x 0.6”

Environmental

Operating Temperature

32˚~ 104˚F (0˚to 40˚C)

Storage Temperature

-4˚~ 140˚F (-20˚~ 60˚C)

Relative Humidity

20~90% RH (no condensation)

www.avenview.com

2.1 Case Dimensions

www.avenview.com

2.2 Absolute Maximum Ratings

Parameter

Symbol

Minimum

Maximum

Units

Power Supply

VCC

-0.3

+5.5

Operating Temperature

VOT

+50

°C

Storage Temperature

VST

-20

+70

°C

Relative Humidity

HRH

2.3 Electrical Specifications

2.3.1 Transmitter Module

Parameter

Symbol

Min

Type

Max

Units

Power

Supply Voltage (Optional External

Power)

Vcc

4.5

5.5

Supply Current

Icc

220

225

Power Dissipation

1.1

1.24

TMDS

Reference Voltage for Graphic Signal

VREF

3.1

3.3

3.5

Signal ended High Level Input Voltage

VREF -0.01

VREF +0.01

Signal ended Low Level Input Voltage

VREF -0.6

VREF -0.4

Signal ended Input Swing Voltage

VISWING

0.4

0.6

Signal ended Standby Input Voltage

VREF -0.01

VREF +0.01

Data Output Load

RLD

Ω

Stresses greater than those listed under “Absolute Maximum Ratings” may cause

permanent damage to the device. This is a stress rating only and functional operation of

the device at these or any other conditions above those indicated in the operations section

for extended periods of time may affect reliability.

Transmitter module of Model DSP includes 4 channel VCSEL(Vertical Surface Emitting Laser

Diode) with 850nm, 911 nm invisible laser radiation.

www.avenview.com

2.3.1 Receiver Module

Parameter

Symbol

Min

Type

Max

Units

Power

Supply Voltage (External Power)

Vcc

4.5

5.5

Supply Current

Icc

150

155

Power Dissipation

0.75

0.853

TMDS

Reference Voltage for Graphic Signal

VREF

3.1

3.3

3.5

Signal ended Input Swing Voltage

VOSWING

0.4

0.6

Data Input Load

RLD

Ω

2.4 Signal Pin Assignment

Transmitter / Receiver

Signal Assignment

T.M.D.S. Data2-

T.M.D.S. Data1-

T.M.D.S. Data0-

T.M.D.S. Data2+

T.M.D.S. Data1+

T.M.D.S. Data0+

T.M.D.S. Data2 Shield

T.M.D.S. Data1 Shield

T.M.D.S. Data0 Shield

No Connect

DDC Clock (SCL)

+5V Power

T.M.D.S. Clock Shield

DDC Data (SDA)

Ground (for +5V)

T.M.D.S. Clock+

No Connect

Hot Plug Detect

T.M.D.S. Clock-

Tabla de contenidos

Otros manuales de Extensor de Avenview

Avenview

Avenview VGA-C5RS-SET Manual de usuario

Avenview

Avenview HBT-C6POE-SET Manual de usuario

Avenview

Avenview FO-HDSDI-SET Manual de usuario

Avenview

Avenview WL-VGA-EXT Manual de usuario

Avenview

Avenview HDM-SHAREPRO-IP Manual de usuario

Avenview

Avenview HDM3D-C53X-SET Manual de usuario

Avenview

Avenview FO-HDM2-T4K-SET Manual de usuario

Avenview

Avenview FO-HDMI-1000M-EMI Manual de usuario

Avenview

Avenview HDM-C5SP-8 Manual de usuario

Avenview

Avenview VTS-C5-R Manual de usuario

Avenview

Avenview HDSD FO-HDSDI-L-SET Manual de usuario

Avenview

Avenview FO-HDM-IP4K-SET Manual de usuario

Avenview

Avenview HBT2-C6BPOC-SET Manual de usuario

Avenview

Avenview HDMI-C5-IR-SET Manual de usuario

Avenview

Avenview FO-DP-300-EMI Manual de usuario

Avenview

Avenview HBT-C6BPOC-SET Manual de usuario

Avenview

Avenview Cat5 Manual de usuario

Avenview

Avenview W-HDM3D-100-SET Manual de usuario

Avenview

Avenview KVM-C5 Series Manual de usuario

Avenview

Avenview FO-DP4K-300-EMIX Manual de usuario

Avenview

Avenview VGA-C5R-SET Manual de usuario

Avenview

Avenview FO-DVI-DL-1000M Manual de usuario

Avenview

Avenview W-HD3DIR-50M Manual de usuario

Avenview

Avenview HBT2-C6POH-USB-SET Manual de usuario

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario