Avenview HBT2-C6POH-USB-SET Manual de usuario
VIDEO WALLS VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS SPLITTERS WIRELESS
CABLES & ACCESSORIES
Control Your Video
4K@60 HDMI/Audio over CAT5e/6/7
Extender with USB and 48V PoE
© 2016Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims
any express or implied warranty, relating to its products of Avenview Inc. is strictly prohibited.
Model #: HBT2-C6POH-USB-SET
Military Residential
Medical Aviation
Education Industrial
Corporate House Of Worship
www.avenview.com
Product Application & Market Sectors
www.avenview.com Page
3
TABLE OF CONTENTS
1. GETTING STARTED ..........................................................................................................................1
1.1 IMPORTANT SAFEGUARDS..............................................................................................................1
1.2 SAFETY INSTRUCTIONS ..................................................................................................................1
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC) ........................... 2
2. INTRODUCTION ..............................................................................................................................3
2.1 PACKAGE CONTENTS .....................................................................................................................4
2.2 BEFORE INSTALLATION...................................................................................................................4
2.3 APPLICATION DIAGRAM..................................................................................................................5
2.4 PANEL DESCRIPTION.......................................................................................................................6
2.4.1 Input Panel (Transmitter, HBT2-C6POH-USB-S) Front...........................................................6
2.4.2 Input Panel (Transmitter, HBT2-C6POH-USB-S) Rear............................................................6
2.4.3 Input Panel (Receiver, HBT2-C6POH-USB-R) Front................................................................7
2.4.4 Input Panel (Receiver, HBT2-C6POH-USB-R) Rear ..................................................................7
3. IR EXTENDERS ..................................................................................................................................8
4. INSTALLATION (HBT2-C6POH-USB-SET) .....................................................................................9
5. GENERAL TROUBLESHOOTING.....................................................................................................9
6. CABLE SPECIFICATION ..................................................................................................................10
7. SPECIFICATIONS .............................................................................................................................11
www.avenview.com Page
1
SECTION 1: GETTING STARTED
1.1 IMPORTANT SAFEGUARDS
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
What the warranty does not cover
•Any product, on which the serial number has been defaced, modified or removed.
•Damage, deterioration or malfunction resulting from:
•Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to
follow instructions supplied with the product.
•Repair or attempted repair by anyone not authorized by us.
•Any damage of the product due to shipment.
•Removal or installation of the product.
•Causes external to the product, such as electric power fluctuation or failure.
•Use of supplies or parts not meeting our specifications.
•Normal wear and tear.
•Any other causes which does not relate to a product defect.
•Removal, installation, and set-up service charges.
1.2 SAFETY INSTRUCTIONS
The HBT2-C6POH-USB-SET, HDMI Extender over Signal CAT5/6 with HDBaseT-Lite Technology has been tested for
conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic
equipments, the HBT2-C6POH-USB-SET should be used with care. Read the following safety instructions to protect yourself
from possible injury and to minimize the risk of damage to the unit.
!Do not dismantle the housing or modify the module.
!Dismantling the housing or modifying the module may result in electrical shock or burn.
!Refer all servicing to qualified service personnel.
!Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage
or other hazards
!Keep the module away from liquids.
!Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on
to the housing, unplug the module immediately.
!Have the module checked by a qualified service engineer before using it again.
!Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
1. GETTING STARTED
www.avenview.com Page
2
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
Warning symbols Description
ONLY USE THE PROVIDED POWER CABLE OR POWER
ADAPTER SUPPLIED. DO NOT TAMPER WITH THE
ELECTRICAL PARTS. THIS MAY RESULT IN ELECTRICAL
SHOCK OR BURN.
DO NOT TAMPER WITH THE UNIT. DOING SO WILL
VOID THE WARRANTY AND CONTINUED USE OF THE
PRODUCT.
THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC.
PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON A
SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT.
www.avenview.com Page
3
2. INTRODUCTION
Avenview HBT2-C6POH-USB-SET HDMI and Audio over Single CAT5e/6/7 Transmitter and Receiver set can send
uncompressed audio/video along with controls, IP and USB data over a single run of CAT5e/6/7 cable up to 100m. It has the
added benefit of control through built-in RS-232 and IR ports. With LAN ports allowing network connection and external
digital and analog audio capability that gives users the convenience of additional audio connection. HBT2-C6POH-USB-SET
also allows the connection of any USB host, enabling a USB connection to up to 2 USB ports, giving the Receiver the ability to
act like a USB hub. The 48V PoE design can power the Receiver (Rx) from the Transmitter (Tx), eliminating the need for a
separate power supply for the Receiver. Also, the ultra-thin mechanical designs allow flexibility mounting position saving
more space.
FEATURES:
• Supports HDBaseT 2.0 specification over a single CAT6/7 cable up to
• 100m/328ft and CAT5e cable up to 90m/295ft;
• Receiver features 2 USB 2.0 ports to control any USB peripheral device;
• HDMI (with 3D & 4K2K@60 -YUV420 support), HDCP 2.2 and DVI compatible;
• HDBaseT 5Play™ convergence: High-Definition (HD) Video and Audio, 100BaseT Ethernet, PoE and
Control (Bidirectional IR/RS-232 pass-through);
• Supports pass-through of HD audio formats: LPCM 2/5.1/7.1CH, Dolby Digital 2/5.1CH, Dolby Digital
Plus, Dolby TrueHD, Dolby Atmos and DTSHD Master Audio;
• Supports optical sampling rate up to 48kHz;
• Supports Ethernet network connection;
• Supports external analog and digital audio transmission;
• Supports RS-232 baud rate from 110~115200bps.
NOTE: The QUALITY and TRANSMISSION of the video signals depends
on the characteristics and quality of the UTP cables. Higher resolutions
and longer transmission distances require low skew cables (<25ns/100m)
for best performance.
Unshielded CAT6 with metal RJ-45 connectors is recommended.
www.avenview.com Page
4
2.1 PACKAGE CONTENTS
Before you start the installation of the Extender/Splitter, please check the package contents.
1HBT2-C6POH-USB-SET X 1
2POWER ADAPTER (+48V 0.83A DC) X2
4
USER’S MANUAL X 1
2.2 BEFORE INSTALLATION
•Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.
•Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.
•Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire.
•Do not twist or pull by force ends of the UTP cable. It can cause malfunction.
5
6
7
8
IR BLASTER
BLUE PHOENIX (Power)
PHOENIX CONTACT
MOUNTING BRACKETS
X 1
X 1
X2
X2
3IR EXTENDER X 1
www.avenview.com Page
5
2.3 APPLICATION DIAGRAM
www.avenview.com Page
6
2.4 PANEL DESCRIPTION
2.4.1 Input Panel (Transmitter, HBT2-C6POH-USB-S) Front
1. DC 48V and POWER LED: Plug the 48V DC power
supply into the unit and connect the adaptor to an AC
outlet. Green LED will illuminate.
2. AUDIO IN L/R: Connect to audio source
such as PC or CD player for audio
signal sending to Receiver’s AUDIO OUT L/R.
3. IR IN 2: Connect to the supplied IR Extender cable
for IR signal reception.
4.
5.
2.4.2 Input Panel (Transmitter, HBT2-C6POH-USB-S) Side
3
2
145 6
2
145
3
USB: Connect from PC or Laptop for data
transmit to or control from the Receiver’s USB
slots.
RS-232 IN TX/RX: Connect to a PC or Laptop with
USB to RS 232 cable for the transmission of RS-232
commands. For receiving command from Receiver side,
the TX and RX pin must be reversed.
SWITCH: This is reserved for firmware update use
only. Switch this deep switch to left for firmware
update use, under normal operation, leave the
switch on right.
6.
1. LAN: Connect to an internet or network connection.
Yellow LED illuminates representing link with
Receiver is established, Blinking irregularly indicates
link error.
2. OPT. OUT: Connect to speaker/amplifier for
audio signal output from Receiver’s OPTICAL
IN.
3. ARC OUT OFF/ON SWITCH: Audio Return
Channel on/off switch*.
4.
5.
HDMI IN: Connect to HDMI source device such
as a DVD or Blu-ray player.
CAT5e/6/7 OUT: Connect to the Receiver unit with a
single CAT5e/6/7 cable for transmission of all data
signals. Green LED will illuminate to indicate PoE
activated.
Left
5LJKt
Note:
*
When ARC switch to ON, depending on the connected devices of the HDMI OUT & Optical in, the ARC input/output
transmission distance may vary. It is recommended to use a 2 meters cable to ensure the best audio quality.
Otros manuales para HBT2-C6POH-USB-SET
1
Tabla de contenidos
Otros manuales de Extensor de Avenview
Avenview
Avenview C-USB-HDM Manual de usuario
Avenview
Avenview Cat5 Manual de usuario
Avenview
Avenview HDMI-C5-S Manual de usuario
Avenview
Avenview C5-USB-200 Manual de usuario
Avenview
Avenview HDM-C5SP-8SRSR Manual de usuario
Avenview
Avenview FO-DVI-DL-1000M Manual de usuario
Avenview
Avenview FO-VGA-DVI Manual de usuario
Avenview
Avenview HDM-C6IP-SET Manual de usuario
Avenview
Avenview HBT2-C6BPOC-SET Manual de usuario
Avenview
Avenview HDMI-C5SP-4 Manual de usuario
Avenview
Avenview C5-USB-200 Manual de usuario
Avenview
Avenview HDM3D-C5SP-8 Manual de usuario
Avenview
Avenview VGA-C5-SP-4 Manual de usuario
Avenview
Avenview HDM-C5XD-S Manual de usuario
Avenview
Avenview FO-DVI-1000X-EMIX Manual de usuario
Avenview
Avenview HDM-C6IPX-SET Manual de usuario
Avenview
Avenview VGA-C5A-SET Manual de usuario
Avenview
Avenview WL-VGA-EXT Manual de usuario
Avenview
Avenview FO-DVI-1080X-SET Manual de usuario
Avenview
Avenview FO-DP4K-300-EMIX Manual de usuario
