Avenview HDM3D-C5SP-4 Manual de usuario
VIDEO WALLS VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS SPLITTERS WIRELESS
CABLES & ACCESSORIES
AV Connectivity, Distribution And Beyond...
1x4 HDMI Extender / Splitter
Single CAT5 with 3D Support and
Local Output
© 2013 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims
any express or implied warranty, relating to its products of Avenview Inc. is strictly prohibited.
Model #: HDM3D-C5SP-4
Military Residential
Medical Aviation
Education Industrial
Corporate House Of Worship
www.avenview.com
Product Application & Market Sectors
www.avenview.com Page 3
TABLE OF CONTENTS
1. GETTING STARTED ..........................................................................................................................1
1.1 IMPORTANT SAFEGUARDS..............................................................................................................1
1.2 SAFETY INSTRUCTIONS ..................................................................................................................1
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC) ........................... 2
2. INTRODUCTION ..............................................................................................................................3
2.1 PACKAGE CONTENTS .....................................................................................................................3
2.2 BEFORE INSTALLATION...................................................................................................................4
2.3 PANEL DESCRIPTION.......................................................................................................................5
2.3.1 Front Panel .................................................................................................................................5
2.3.2 Rear Panel...................................................................................................................................5
2.3.3 Bottom Panel..............................................................................................................................5
3. EDID LEARNING ...............................................................................................................................6
4. INSTALLATION..................................................................................................................................6
5. GENERAL TROUBLESHOOTING.....................................................................................................7
5. SPECIFICATIONS ...............................................................................................................................8
6. HDMI PIN DEFINITION ....................................................................................................................9
www.avenview.com Page 1
SECTION 1: GETTING STARTED
1.1 IMPORTANT SAFEGUARDS
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
What the warranty does not cover
•Any product, on which the serial number has been defaced, modified or removed.
•Damage, deterioration or malfunction resulting from:
•Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to
follow instructions supplied with the product.
•Repair or attempted repair by anyone not authorized by us.
•Any damage of the product due to shipment.
•Removal or installation of the product.
•Causes external to the product, such as electric power fluctuation or failure.
•Use of supplies or parts not meeting our specifications.
•Normal wear and tear.
•Any other causes which does not relate to a product defect.
•Removal, installation, and set-up service charges.
1.2 SAFETY INSTRUCTIONS
The Avenview HDM3D-C5SP-4 HDMI Extender / Splitter over CAT5 with Full 3D Support has been tested for conformance to
safety regulations and requirements, and has been certified for international use. However, like all electronic equipment’s, the
HDM3D-C5SP-4 should be used with care. Read the following safety instructions to protect yourself from possible injury and to
minimize the risk of damage to the unit.
!Do not dismantle the housing or modify the module.
!Dismantling the housing or modifying the module may result in electrical shock or burn.
!Refer all servicing to qualified service personnel.
!Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage
or other hazards
!Keep the module away from liquids.
!Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on
to the housing, unplug the module immediately.
!Have the module checked by a qualified service engineer before using it again.
!Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
1. GETTING STARTED
www.avenview.com Page 2
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
Warning symbols Description
ONLY USE THE PROVIDED POWER CABLE OR POWER
ADAPTER SUPPLIED. DO NOT TAMPER WITH THE
ELECTRICAL PARTS. THIS MAY RESULT IN ELECTRICAL
SHOCK OR BURN.
DO NOT TAMPER WITH THE UNIT. DOING SO WILL
VOID THE WARRANTY AND CONTINUED USE OF THE
PRODUCT.
THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC.
PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON A
SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT.
www.avenview.com Page 3
2. INTRODUCTION
The Avenview HDM3D-C5SP-4 HDMI over Single CAT5 with Full 3D Support Distribution Amplifier with Local Output provides
the most flexible solution by which the high definition video and high quality audio can be transmitted to different locations over
a long distance. These devices can cascade, allowing you to extend HDMI compliant displays almost anywhere. The input HDMI
source can be duplicated and distributed to up to 4 HDMI enable displays through cost effective Cat-5/6 cables and RJ-45 to
HDMI mini-extenders HDM3D-C5-R-M or Long Range HDM-C53X-R aka HDM3D-C53X-R. With the built in equalization, the
input HDMI cable can be extended up to 20 meters (66 feet) long under Full HD, and make the overall transmission distance
superior than regular HDMI splitters or matrix switches in the market. With use of Long Range Receiver, HDMI signal can be
extended to 50 meters (165 feet).
- Supports HDMI Deep Color & Full 3D
- HDMI
- HDCP compliant
- Regenerates the HDMI signal
- HDMI local output
- Supports default HDMI EDID and has the ability to learn the EDID of the displays
- Extends up to 20m (66ft) of input HDMI cable with Mini Receiver
- Extends up to 50m (165ft) (720p / 1080i) of output CAT5/6 cable with Long Range Receiver
- Extends up to 40m (130ft) (1080p) of output CAT5/6 cable with Long Range Receiver
- Pure unaltered uncompressed 7.1ch digital HDMI over LAN cable transmission
- Allows cascading
- Perfectly integrated with other HDM-C5XD Series products
2.1 PACKAGE CONTENTS
Before you start the installation of the Extender/Splitter, please check the package contents.
1HDM3D-C5SP-4 X 1
2POWER ADAPTER (+5VDC, 4A) X1
3USER’S MANUAL X 1
www.avenview.com Page 4
2.2 BEFORE INSTALLATION
•Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.
•Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.
•Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire.
•Do not twist or pull by force ends of the UTP cable. It can cause malfunction.
www.avenview.com Page 5
2.3 PANEL DESCRIPTION
2.3.1 Front Panel
2.3.2 Rear Panel
2.3.3 Bottom Panel
1. Power LED 2. Signal LED
3. Power Jack 4. HDMI Input
5. HDMI Local Output 6. CAT 5/6/7 Output 1 – 4
7. SW1: EDID Mode 8. SW2: EDID – Full HD Selection
9. SW3: EDID – Audio Selection 10. SW4: 3D/2D Selection
1
7
8
9
10
2
3 4 5 6
www.avenview.com Page 6
3. EDID LEARNING
1. Power up the HDM3D-C5SP-4. Connect to HDMI OUTPUT with the display you want the HDM3D-C5SP-4 to learn
its EDID.
2. To learn the display’s EDID for source device connected to HDMI OUTPUT, Set SW1 to left Position. Power on and
wait for about 2-3 seconds to complete the EDID learning process; the users do not need to power cycle again or even
twice while plugging on different displays.
Left Position Right Position
SW1 DEFAULT EDID EDID LEARNING
SW2 FULL HD HD
SW3 AUDIO-MULTI CHANNEL AUDIO – 2 CHANNEL
SW4 3D 2D
- The instant switching is enabled only when the video and audio setting of the source has been adjusted to
“Auto” or “Pass Through”
4. INSTALLATION
To setup Avenview HDM3D-C5SP-4 follow these steps for connecting to a device:
1. Turn off all devices including monitors / TV
2. Connect to a HDMI source (such as a Blu-Ray Disc player) to HDMI Input of HDM3D-C5SP-4
3. Connect the receiver HDM-C53X-R or HDM-C5-R-M to HDM3D-C5SP-4 from RJ45 Out with CAT5 / CAT6 cable
4. Plug in 5V 4A DC Power (supplied).
5. Power on the HDMI display
6. Power on HDMI Sources.
www.avenview.com Page 7
5. GENERAL TROUBLESHOOTING
PROBLEM POSSIBLE SOLUTION
NO IMAGE •Check if connection to the source and the display are correct.
•Ensure that display device supports 480p, 720p and 1080p resolution
SCREEN DEFECTS
APPEAR
•This product supports up to 1080p resolution.
•Check the HDMI connection
•If outputting from a PC. Check the maximum resolution range of the graphics card.
EQUALIZER SET-
TINGS
•Please check the RX (Receiver) Dial Mode to ensure it is on Min or gradually increase
it to Max until the video appears.
WARNING
Do Not Over Power The Eq Signal Strength
When Adjusting The Eq Please Ensure A Slow Clockwise
Turn From Min-Max
Stop Once The Picture/Audio Is Working Properly
Do Not Continue To Turn Dial.
Persistance Will Cause An Over Power Condition Of The Signal
And May Affect Long Term Reliability.
Thank You.
Otros manuales para HDM3D-C5SP-4
1
Tabla de contenidos
Otros manuales de Extensor de Avenview
Avenview
Avenview FO-HDSDI-SET Manual de usuario
Avenview
Avenview HDMI-C5-3X-SET Manual de usuario
Avenview
Avenview HDM3D-C5SP-8 Manual de usuario
Avenview
Avenview HDMI-C5SP-8SRSR Manual de usuario
Avenview
Avenview HDM-C5-3X-SET Manual de usuario
Avenview
Avenview FO-DVI-DL-1000M Manual de usuario
Avenview
Avenview FO-DP4K-300-EMIX Manual de usuario
Avenview
Avenview USB-C6-50M Manual de usuario
Avenview
Avenview VGA-C5-SP-4 Manual de usuario
Avenview
Avenview HDM3D-C5IR-SET Manual de usuario
Avenview
Avenview FO-DVI-DL-330 Series Manual de usuario
Avenview
Avenview FO-DVI-1080X-SET Manual de usuario
Avenview
Avenview FO-HDMI-1000M-EMI Manual de usuario
Avenview
Avenview HDM3D-C53X-SET Manual de usuario
Avenview
Avenview FO-HDM-1000M-EMI Manual de usuario
Avenview
Avenview FO-HDM-SET Manual de usuario
Avenview
Avenview W-HD3DIR-50M Manual de usuario
Avenview
Avenview Cat5 Manual de usuario
Avenview
Avenview HDM-C5SP-8SRSR Manual de usuario
Avenview
Avenview WL-VGA-EXT Manual de usuario
