PROAIM P-BKST-02 Manual de usuario
1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Universal Backseat Monitor Control System
for In-Car Rigging (P-BKST-02)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
2
Universal Backseat Setup
Aer aaching the headrest, insert a bolt to
secure it properly.
Insert two Stando pins into the Universal
headrest mount by matching them with the
threads of the Universal headrest, as shown in
the image.
Aach the round cheese plate properly by
matching it with the threads of two stando
pins, and then insert the Allen bolt.
Aer inserng the bolt, properly secure the
headrest on the backseat with the help of the
Allen key, and same step is to be followed on
the other side as well, as shown in the image.
Aach the Universal headrest mount on the
back seat of the vehicle, as shown in the
image.
Tighten the Allen Bolt with help of the Allen
key.
Note: Easily connect the headrest mount with
cheese plate which has mulple threads & holes
for quick & easy mounng.
3
Aer inserng the bolt, secure it properly
with the help of the Allen key and then in-
sert the rigging rod (4 Length) into it.
Aer inserng the rod, ghten the bolt with
the help of the Allen key. Then aach the 360°
Houdini speed rail rod clamp at the center of
the 4 length rod.
Then secure the bolt properly with the help of
the Allen Key and then insert the baby pin to
mount the monitor.
Insert the Rigging rod (4 Length) in both the
Houdini speed rail clamps and secure it by
properly ghtening the bolt, as shown in the
image.
Aach the Houdini speed rail clamp on
the round cheese plate and insert the bolt
into it.
Aer inserng the baby pin, secure it properly
with the help of the Allen key, as shown in the
image.
4
Aach the rigging road clamp to the round
cheese plate by matching it with the threads,
then secure it properly with the help of Allen
Key.
Then insert 360° Houdini Rod Clamp into the
Rigging Rod (180mm) and secure it properly
with the help of the Allen key, and then insert
rigging rod (250mm) into it.
Aer inserng the rigging rod (250mm), ght-
en it with the help of Allen Key. Then insert
the 360° Houdini rod clamp into it, as shown in
the image.
To secure the rigging road clamp, insert the
rigging road 180mm in it and secure it with the
help of Allen key.
Mount the monitor on the baby pin and se-
cure it properly by ghtening it with the help
of the knob.
Aer inserng the 360° Houdini Rod Clamp,
insert black anodized speed rail (3 length)
and secure it properly with the help of the
Allen key.
5
Note: It is enrely modular & adjustable. You
just need to set your control device, monitor,
LCD, wheels, and joyscks behind the front seat
in any desired posion and focus only on your
creave cinemac shots.
Black anodized speed rail (3 length) with
360° houdini rod clamp are properly secured,
as shown in the image.
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our ut-
most support and care unl you use our product.
YOUR PROAIM UNIVERSAL BACKSEAT MONITOR CONTROL SYSTEM
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Tabla de contenidos
Otros manuales de Accesorios para cámaras de PROAIM
PROAIM
PROAIM P-TMGC-01 Manual de usuario
PROAIM
PROAIM VCTR-LT-HAP Manual de usuario
PROAIM
PROAIM Bowado Pro Manual de usuario
PROAIM
PROAIM STD-PTZ-01 Manual de usuario
PROAIM
PROAIM Gripmag Manual de usuario
PROAIM
PROAIM CINEMA Series Manual de usuario
PROAIM
PROAIM CINEMA Series Manual de usuario
PROAIM
PROAIM P-MLMT-01 Manual de usuario
PROAIM
PROAIM P-ZL-S4 Manual de usuario
PROAIM
PROAIM P-FT-J Manual de usuario
PROAIM
PROAIM Mitchell Cyrus Manual de usuario
PROAIM
PROAIM Airwave XL Shock Absorber Arm Manual de usuario
PROAIM
PROAIM QR-UD15 Manual de usuario
PROAIM
PROAIM Universal P-DMC-59 Manual de usuario
PROAIM
PROAIM CINEMA QR-ELMG-01 Manual de usuario
PROAIM
PROAIM VI-252-00 Manual de usuario
PROAIM
PROAIM Kite-22 Ultimate Package Manual de usuario
PROAIM
PROAIM CAMTREE HUNT Manual de usuario
PROAIM
PROAIM CINEMA Series Manual de usuario
PROAIM
PROAIM CINEMA Series Manual de usuario
