PROAIM P-LLBT-100 Manual de usuario
1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
HD 100mm Bowl Baby Camera Tripod Stand w
Lever-Fricon and Aluminum Spreader (P-LLBT-100)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
HD 100mm Bowl Baby Camera Tripod Stand
with Lever Fricon
Spanner Size: 13mm
Aluminum Spreader
Assemb ly Manua l
2
Aluminum Spreader Setup
• Extend the Spreader on the oor and loosen
all three knobs.
NOTE: The Spreader aaches to the spiked legs
of the spreader to provide precise customizaon
of the tripod's length and stability.
• Aer loosening the knobs, extend the
Spreader per your requirement.
• You can lock the posion using the locking
knobs present on each arm.
NOTE: The arms of the Spreader can easily
telescope out from 41cm/16” to 66cm/26”
radius, oering a broader footprint to create a
secure and steady base for the tripod.
Extendable adjustment via the provided locking knobs of Spreader
3
• Loosen all three adjustment knobs to set the
desired height of the Stand.
NOTE: One-stage telescopic design with fricon
knob extends up to 6 inches to capture
low-angle shots, and conversely, it can be easily
extended up to 34 inches for greater elevaon.
• Aer seng the height, ghten the knobs to
secure the Stand, as shown in the image.
NOTE: Locking pins on each leg secures the
adjusted height, prevenng them from
retracng under load.
• Unlock the red knob to adjust the Tripod’s legs
according to your requirement.
• Aer adjusng the Tripod legs, re-lock the
knob, as shown in the image.
• Mount the Tripod on the aluminum Spreader
by equally aligning them.
• Aer mounng the Tripod, properly secure it
using the rubber gripper.
100mm Bowl Baby Camera Tripod Stand Setup
4
• Loosen the locking knob of the 100mm bowl
uid head (Not Included) and remove it.
• Now, mount the uid head on the Tripod
Stand.
• Tighten the locking knob to secure the uid
head.
• Press the red locking lever of the uid head
(Not Included) to unlock it.
• Aer unlocking the yellow locking lever,
remove the top plate of the uid head
• Aach it to the Camera (Not Included) by
matching the threads.
• Secure the top plate and the Camera
(Not Included) using a screwdriver.
• Now, mount the Camera (Not Included) on the
uid head and properly lock it as shown in the
image.
NOTE: The assembly of the whole setup is quick
and tool-less, saving you valuable producon
me.
• Tripod Stand works eciently with compable
devices such as Sliders, Jibs, and Geared
Heads with its 100mm bowl base.
5
YOUR PROAIM HD 100MM BOWL BABY CAMERA TRIPOD STAND W
LEVER-FRICTION AND ALUMINUM SPREADER
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
Tabla de contenidos
Otros manuales de Accesorios para cámaras de PROAIM
PROAIM
PROAIM QR-WV-710 Manual de usuario
PROAIM
PROAIM Cinema Breeza Pro DL-BRZP-01 Manual de usuario
PROAIM
PROAIM 9CTH-TMP Manual de usuario
PROAIM
PROAIM VCTR-LT-HAP Manual de usuario
PROAIM
PROAIM Cinema MA-293-00 Manual de usuario
PROAIM
PROAIM P-GDTR-01 Manual de usuario
PROAIM
PROAIM Swift Dolly Manual de usuario
PROAIM
PROAIM FF-FCBE-01 Manual de usuario
PROAIM
PROAIM SR-SBP-02 Manual de usuario
PROAIM
PROAIM FLN-CTDB Manual de usuario
PROAIM
PROAIM CINEMA Series Manual de usuario
PROAIM
PROAIM CINEMA Series Manual de usuario
PROAIM
PROAIM P-TRK-12 Manual de usuario
PROAIM
PROAIM P-WV-2PL-SD Manual de usuario
PROAIM
PROAIM CINEMA Series Manual de usuario
PROAIM
PROAIM CINEMA P-CTST-01 Manual de usuario
PROAIM
PROAIM P-TMGC-01 Manual de usuario
PROAIM
PROAIM RS274 Manual de usuario
PROAIM
PROAIM P-W5P24-BASE Manual de usuario
PROAIM
PROAIM Fusion Manual de usuario
