Kramer TP-114 Manual de usuario

Kramer Electronics, Ltd.

USER MANUAL

Model:

TP-114

1:4 XGA/HD DA/CAT5 Transmitter

Contents

Introduction 1

Getting Started 1

2.1

Getting Started 1

Overview 3

3.1

About the Power Connect Feature 3

3.2

Shielded Twisted Pair (STP) / Unshielded Twisted Pair (UTP) 3

3.3

About the TP-114 4

3.4

Recommendations for Achieving the Best Performance 4

Your TP-114 1:4 XGA / HD DA /CAT5 Transmitter 5

Configuring a TP-114 XGA / HD Line Transmitter – DA System 7

5.1

Wiring the CAT5 LINE IN / LINE OUT RJ-45 Connectors 9

Technical Specifications 10

Figures

Figure 1: TP-114 1:4 XGA / HD DA /CAT5 Transmitter 5

Figure 2: TP-114 1:4 XGA / HD DA /CAT5 Transmitter (Top Side Panel) 5

Figure 3: TP-114 1:4 XGA / HD DA /CAT5 Transmitter (Lower Side Panel) 5

Figure 4: TP-114 1:4 XGA / HD DA /CAT5 Transmitter (Underside Panel) 6

Figure 5: Configuring a TP-114 XGA / HD Line Transmitter – DA 8

Figure 6: CAT5 PINOUT 9

Tables

Table 1: TP-114 1:4 XGA / HD DA /CAT5 Transmitter Features 6

Table 2: TP-114 1:4 XGA / HD DA /CAT5 Transmitter (Underside Panel) Features 6

Table 3: CAT5 PINOUT 9

Table 4: Technical Specifications of the TP-114 (with 100m CAT5 cable) 10

Introduction

1 Introduction

Welcome to Kramer Electronics (since 1981): a world of unique, creative and

affordable solutions to the infinite range of problems that confront the video, audio

and presentation professional on a daily basis. In recent years, we have redesigned

and upgraded most of our line, making the best even better! Our 500-plus

different models now appear in 8 Groups

, which are clearly defined by function.

Congratulations on purchasing your Kramer TOOLS: TP-114 XGA / HD Line

Transmitter – DA, which is ideal for:

 Presentation and multimedia applications

 Long range graphics distribution for schools, hospitals, security, and stores

The package includes the following:

 TP-114 1:4 XGA / HD DA /CAT5 Transmitter

 Power adapter (12V DC Input)

 This user manual

2 Getting Started

We recommend that you:

 Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

 Review the contents of this user manual

 Use Kramer high performance high resolution cables

2.1 Getting Started

This quick start chart summarizes the basic setup and operation steps.

1 GROUP 1: Distribution Amplifiers; GROUP 2: Video and Audio Switchers, Matrix Switchers and Controllers; GROUP 3:

Video, Audio, VGA/XGA Processors; GROUP 4: Interfaces and Sync Processors; GROUP 5: Twisted Pair Interfaces;

GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors

2 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com

3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Getting Started

Overview

3 Overview

This section describes:

 The power connect feature, see section 3.1

 Using shielded twisted pair (STP) / unshielded twisted pair (UTP), see

section 3.2

 A summary of the TP-114, see section 3.3

 Recommendations for achieving the best performance, see section 3.4

3.1 About the Power Connect Feature

The Power Connect feature lets you power a transmitter / receiver system by

connecting just one power adapter— to either the transmitter or the receiver.

The other unit is fed via the cable connecting between the

transmitter/receiver. The Power Connect feature applies as long as the cable

can carry power. The distance does not exceed 50 meters on standard CAT5

cable, for longer distances, heavy gauge cable should be used

For a CAT5 cable exceeding a distance of 50 meters, separate power supplies

should be connected to the transmitter and to the receiver simultaneously.

3.2 Shielded Twisted Pair (STP) / Unshielded Twisted Pair (UTP)

The decision whether to use shielded twisted pair (STP) cable or unshielded

twisted pair (UTP) cable depends on the nature of the application.

It is recommended that in applications with high interference, shielded

twisted pair (STP) cable is used. However, the shield itself does create a

capacitance that degrades the frequency response of the machines. For shorter

distances, of 50m or so, shielded twisted pair (STP) cable is preferred because

it provides protection from interference (degradation is not apparent).

For long range applications, unshielded twisted pair (UTP) cable is preferred.

However, the unshielded twisted pair (UTP) cable should be installed far away from

electric cables, motors and so on, which are prone to create electrical interference.

1 CAT5 cable is still suitable for the video/audio transmission, but not for feeding the power at these distances

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Overview

3.3 About the TP-114

Your Kramer TOOLS TP-114 1:4 XGA / HD DA /CAT5 Transmitter:

 Receives a computer graphics

/ HD

signal and transmits it over four

CAT5 cables to appropriate receivers

 Has a resolution of up to UXGA, and a transmission range of more than

300 ft. (more than 100 meters)

 Can change the polarity of decoding H and V Sync for video

 Includes the power connect feature (see section 3.1)

 Is 12VDC fed

3.4 Recommendations for Achieving the Best Performance

Achieving the best performance means:

 Connecting only good quality connection cables, thus avoiding

interference, deterioration in signal quality due to poor matching, and elevated

noise levels (often associated with low quality cables)

 Avoiding interference from neighboring electrical appliances that may

adversely influence signal quality, and positioning your TP-114 away from

moisture, excessive sunlight and dust

1 The terminology XGA is used throughout this manual, where this implies any RGBHV signal on an HD15 connector

having a resolution from VGA up to UXGA

2 The TP-114 accepts high definition resolutions: 480p, 576p, 720p, 1080i, and 1080p

3 Note that the CAT5 connectors exclude audio

Your TP-114 1:4 XGA / HD DA /CAT5 Transmitter

4 Your TP-114 1:4 XGA / HD DA /CAT5 Transmitter

Figure 1, Figure 2, Figure 3 and Table 1 define the TP-114:

Figure 1: TP-114 1:4 XGA / HD DA /CAT5 Transmitter

Figure 2: TP-114 1:4 XGA / HD DA /CAT5 Transmitter (Top Side Panel)

Figure 3: TP-114 1:4 XGA / HD DA /CAT5 Transmitter (Lower Side Panel)

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Your TP-114 1:4 XGA / HD DA /CAT5 Transmitter

Table 1: TP-114 1:4 XGA / HD DA /CAT5 Transmitter Features

# Feature Function

1 LINE OUT 1 RJ-45 Connector Connects to

the LINE IN RJ-45 connector on the (first) TP-120 XGA

Line Receiver

2 LINE OUT 2 RJ-45 Connector Connects to

the LINE IN RJ-45 connector on the (second) TP-120

XGA Line Receiver

3 LINE OUT 3 RJ-45 Connector Connects to

the LINE IN RJ-45 connector on the (third) TP-120

XGA Line Receiver

4 LINE OUT 4 RJ-45 Connector Connects to

the LINE IN RJ-45 connector on the (fourth) TP-120

XGA Line Receiver

5 12V DC +12V DC connector for powering the unit

6 XGA IN HD15F Connector Connect to the XGA source

7 XGA OUT HD15F Connector Connect to the XGA acceptor

8 ON LED Illuminates when receiving power

Figure 4 and Table 2 define the TP-114 underside panel:

Figure 4: TP-114 1:4 XGA / HD DA /CAT5 Transmitter (Underside Panel)

Table 2: TP-114 1:4 XGA / HD DA /CAT5 Transmitter (Underside Panel) Features

# Feature Function

1 VS Switch Slide the switch up

to change the VS polarity to NEGATIVE polarity

; slide the

switch down to NORMAL to retain the polarity

2 HS

Switch Slide the switch up

to change the HS polarity to NEGATIVE polarity

; slide the

switch down to NORMAL to retain the polarity

1 Using a UTP CAT5 cable with RJ-45 connectors at both ends (the PINOUT is defined in Table 3 and Figure 6)

2 Refer to the separate user manual: PT-110, PT-120, TP-120, WP-110, which can be downloaded from the Internet at this

URL: http://www.kramerelectronics.com. Also, see the example illustrated in Figure 5

3 By default, both switches are set in the down position

4 Downgoing syncs

Configuring a TP-114 XGA / HD Line Transmitter – DA System

5 Configuring a TP-114 XGA / HD Line Transmitter – DA System

You can use the TP-114 with four TP-120 units

to configure a 1:4 XGA / HD

DA /CAT5 Transmitter system. This will let you transmit a computer

graphics / HD signal to four displays via long line CAT5 UTP cabling.

To connect the TP-114 to four TP-120 units, as the example in Figure 5

illustrates, do the following:

1. On the TP-114, connect the XGA / HD source (for example, a computer

graphics / HD source) to the XGA IN HD15F connector, and connect the line

output RJ-45 connector

 OUT 1 connector to the LINE IN RJ-45 connector on the first TP-120

 OUT 2 connector to the LINE IN RJ-45 connector on the second TP-120

 OUT 3 connector to the LINE IN RJ-45 connector on the third TP-120

 OUT 4 connector to the LINE IN RJ-45 connector on the fourth TP-120

2. On the four TP-120 units, connect the:

 XGA OUT HD15F connector of the first TP-120 unit to the XGA / HD

acceptor (for example, Display 1)

 XGA OUT HD15F connector of the second TP-120 unit to the XGA /

HD acceptor (for example, Display 2)

 XGA OUT HD15F connector of the third TP-120 unit to the XGA / HD

acceptor (for example, Display 3)

 XGA OUT HD15F connector of the fourth TP-120 unit to the XGA / HD

acceptor (for example, Display 4)

3. On each Kramer TOOL, connect the 12V DC power adapter to the power

socket and connect the adapter to the mains electricity.

The signal from the XGA source is transmitted via the CAT5 cables,

decoded and converted at the each of the XGA OUT HD15F connectors

to the XGA acceptors.

4. On the TP-120 units, if necessary:

 Set the H SYNC and V SYNC switches

on the underside

 Adjust

the video output signal level and/or cable compensation

equalization level

1 Refer to the separate user manual: PT-110, PT-120, TP-120, WP-110, which can be downloaded from the Internet at this

URL: http://www.kramerelectronics.com

2 Via UTP cabling (with a range of more than 300ft (>100m)). For details of how to wire a CAT5 LINE IN / LINE OUT

RJ-45 connector, see section 5.1

3 By default, both switches are set down (for negative V SYNC and H SYNC polarity)

4 Use a screwdriver to carefully rotate the trimmer, adjusting the appropriate level

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Configuring a TP-114 XGA / HD Line Transmitter – DA System

5. On the TP-114, if necessary, set the VS and HS switches

on the

underside

Figure 5: Configuring a TP-114 XGA / HD Line Transmitter – DA

1 By default, both switches are set down (to NORMAL) to retain the VS and HS polarity

Otros manuales para TP-114

Tabla de contenidos

Otros manuales de Transmisor de Kramer

Kramer

Kramer WP-121 Manual de usuario

Kramer

Kramer 610T Manual de usuario

Kramer

Kramer PT-571HDCP Manual de usuario

Kramer

Kramer WP-110 Manual de usuario

Kramer

Kramer SWT3-41-U-T Manual de usuario

Kramer

Kramer TP-202 Manual de usuario

Kramer

Kramer TP-112HD Manual de usuario

Kramer

Kramer WP-121 Manual de usuario

Kramer

Kramer 691 Manual de usuario

Kramer

Kramer TP-594Txr Manual de usuario

Kramer

Kramer TP-15 Manual de usuario

Kramer

Kramer 691 Manual de usuario

Kramer

Kramer VP-428H2 Manual de usuario

Kramer

Kramer TP-145 Manual de usuario

Kramer

Kramer KW-14T Manual de usuario

Kramer

Kramer F-121 Manual de usuario

Kramer

Kramer 610T Manual de usuario

Kramer

Kramer VP-428H2 Manual de usuario

Kramer

Kramer TP-752T Manual de usuario

Kramer

Kramer TP-580TD Manual de usuario

Kramer

Kramer PT-2UT/R-KIT Manual de usuario

Kramer

Kramer TP-205A Manual de usuario

Kramer

Kramer TP-410 Manual de usuario

Kramer

Kramer 610R Manual de usuario

Manuales populares de Transmisor de otras marcas

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manual del propietario

Honeywell

Honeywell 5816WMBR Manual de usuario

Kamstrup

Kamstrup READy MTU Instrucciones de funcionamiento

Omega

Omega ZW Series Manual de usuario

ABB

ABB Field 264H Guía

Alinco

Alinco DJ-V17T Manual de usuario

Dejero

Dejero EnGo 3x Manual de usuario

Rosemount

Rosemount 4600 Manual de usuario

Speaka Professional

Speaka Professional 2342740 Manual de usuario

trubomat

trubomat GAB 1000 Manual de usuario

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manual de usuario

Rondish

Rondish UT-11 Manual de usuario

MG 10JRE Manual de usuario

Burkert

Burkert 8177 Manual de usuario

Firetide

Firetide HotPort 3203 Manual

Tele Radio

Tele Radio T9-02 Manual de usuario

Rotronic

Rotronic HygroFlex HF3 Series Manual de usuario

Jamara

Jamara FCX6 Pro Tel Manual de usuario