Kogan KAMN27F7VA Manual de usuario

27” FULL HD FREESYNC

FRAMELESS MONITOR

1920 x 1080, 75Hz

KAMN27F7VA

Ensure to read all instructions and warnings in this user guide prior to first use. Retain this

user guide for future reference.

•This monitor is designed with ventilation holes on the back of the casing. Do not cover

or block them.

•Avoid placing the monitor near heaters, stoves, fireplaces, or other heat sources.

•Do not place this monitor in rooms lacking adequate ventilation.

•Do not insert any objects or spray any liquids into the vents.

•Do not position the monitor in unsafe locations. If the monitor falls, it may be

damaged and cause injury to people within its vicinity.

•Do not place heavy objects on the monitor, its power cord, or any connected cables.

•Do not open the back panel of the monitor as it contains a high-voltage current even

when not plugged in.

•Unplug the monitor if it will not be used for an extended period.

•Ensure the monitor is unplugged before cleaning.

The terms HDMI and HDMI High-Definition Multimedia Interface,

and the HDMI Logo are trademarks or registered trademarks of

HDMI Licensing Administrator, Inc. in the United States, and other

countries.

SAFETY & WARNINGS

A Monitor (x1)

B Stand stem (x1)

C Stand base (x1)

DStand stem plate (x1)

E M4 8mm screw (x3)

F M5 12mm screw (x1)

G Power cord (x1)

H HDMI cable (x1)

I User guide (x1)

COMPONENTS

1 Menu/select button 6 HDMI port

2 Exit/input menu button 7 VGA port

3 Up/increase volume button 8 3.5mm audio port

4 Down/brightness button 9 Power port

5 Power button

OVERVIEW

1. With the display side facing down, lay the monitor (A) on a soft cloth to prevent

damage.

2. Clip the stand stem plate (D) into the

stand stem (B). Using a screwdriver (not

supplied), secure the M4 8mm screws (E)

through the holes on the stand stem

plate (D) to the stand stem (B).

3.Clip the stand stem (B) into the monitor

(A).

4.Align the stand base (C) with the stand

stem (B). Using a screwdriver, secure the

stand base (C) to the stand stem (B) with

the M5 12mm screw (F).

STAND ASSEMBLY

If mounting to a wall, ensure the stand base and stand stem are disconnected from the

monitor.

Consult a professional before mounting the monitor.

1. With the display side facing down, lay the monitor on a soft cloth to prevent damage.

2.Identify the four wall mounting screws on the back of the monitor.

3.Mount the monitor as desired with the steps provided with your VESA mount.

VESA MOUNT

Notes:

•Ensure there is at least a 10cm clearance away from all sides of the monitor.

•The mounting hole distance for this monitor is 100mm x 100mm.

•M4 8mm screws are required.

•VESA mount and mounting accessories are not included.

•Images are for reference only.

Mount

(not included)

Before connecting, ensure the display is switched off.

Power cable

Connect one end of the power cable into the power port

on the monitor. Connect the other end into a power

socket.

HDMI

In order for the monitor to receive HDMI signals to your

computer, plug one end of the included HDMI cable

into the HDMI port on the monitor.

Plug the other end into the HDMI port on your

computer.

3.5mm audio port

In order to receive audio signals to your computer, plug

your earphones, headphones, or other audio device (not

included) into the 3.5mm audio port on the monitor.

If any audio device is connected to the computer at the

same time, it will not produce sound.

VGA

In order for the monitor to receive VGA signals to your

computer, plug one end of a VGA cable (not included)

into the VGA port on the monitor.

Plug the other end into the VGA port on your computer.

CONNECTIVITY

Power cable

Earphones

(not included)

VGA cable

(not included)

VGA OUTPUT

(PC)

HDMI cable

HDMI OUTPUT

(PC

)

1. Connect the monitor to your computer via HDMI/VGA.

2.Connect one end of the power cable into the power port of the monitor. Connect the

other end into an outlet, then turn the outlet on.

3.Press the power button to turn the monitor on.

On-Screen display (OSD) menu

The OSD menu allows adjustments to various settings for the monitor.

1. Press the menu/select button to access the OSD menu.

2.Press the up and down buttons to browse through the categories of settings. Press the

menu/select button to enter the sub-menu.

3.Press the up and down buttons to browse through the sub-menu. Press the

menu/select button to enter the adjustment settings of the desired setting.

4.Press the up and down buttons to adjust the desired setting. Press the menu/select

button to confirm the adjustment.

5.Press the exit/input menu button to exit the OSD menu.

OPERATION

Note:

It is recommended that a surge protector with adequate voltage is used if the

monitor cannot be directly connected to an outlet.

OSD menu settings

Below is a list of the settings available that can be adjusted through the OSD menu.

Category Sub-Menu Options Description

BRIGHTNESS

Brightness 0–100 Adjusts the display

brightness

Contrast 0–100 Adjusts the display contrast

ECO modes

Standard, Movie,

RTS, FPS,

Game, Text

Sets the display’s colour

balance to pre-set levels to

suit different uses

DCR On, Off Turns the DCR function

on/off

IMAGE

H. position 0–100 Adjusts the horizontal

position of the display

V. position 0–100 Adjusts the vertical position

of the display

Clock 0–100 Adjusts the clock setting

Phase 0–100 Adjusts the phase setting

Aspect Wide, 4:3 Sets the aspect ratio

COLOUR TEMP.

Colour temp. Warm, User,

Cool

Includes pre-set (Warm,

Cool) and custom (User)

colour temperatures

Red 0–100 Allows for manual

adjustment of the RGB

colour balance

Green 0–100

Blue 0–100

Low blue light 0–100 Adjusts the intensity of the

low blue light effect

Tabla de contenidos

Otros manuales de Monitor de Kogan

Kogan

Kogan KAMN32F16LC Manual de usuario

Kogan

Kogan KALED30MONA Manual de usuario

Kogan

Kogan KAMN24FXCLB Manual de usuario

Kogan

Kogan KAMN32F7SA Manual de usuario

Kogan

Kogan KAMN27LSC Manual de usuario

Kogan

Kogan KAMN30FUSA Manual de usuario

Kogan

Kogan KAMN32F7USA Manual de usuario

Kogan

Kogan Kaled24Mona Manual de usuario

Kogan

Kogan KALED27MONSC Manual de usuario

Kogan

Kogan KAHUDQ7GPSB Manual de usuario

Kogan

Kogan KAMN22FNSA Manual de usuario

Kogan

Kogan KAMN29UHWLA Manual de usuario

Kogan

Kogan KAMN32QF7TB Manual de usuario

Kogan

Kogan KAMN27QFSB Manual de usuario

Kogan

Kogan KAMN27RQ1LB Manual de usuario

Kogan

Kogan KAMN27QFQA Manual de usuario

Kogan

Kogan KAMN27QFSA Manual de usuario

Kogan

Kogan KAMN32RT1SA Manual de usuario

Kogan

Kogan KALED28UHDA Manual de usuario

Kogan

Kogan KAMN32F16PA Manual de usuario

Kogan

Kogan KAMN24F75LB Manual de usuario

Kogan

Kogan KAMN32RQ1LA Manual de usuario

Kogan

Kogan KAMN27PQFTA Manual de usuario

Kogan

Kogan KAMN24FG6QA Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación