Kogan KAMN27RQ1LB Manual de usuario
27" CURVED GAMING MONITOR
2560 x 1440, 144Hz
KAMN27RQ1LB
2
Safety & Warnings 3
Components 4
Overview 5
Stand Assembly 6
VESA Mount 8
Connectivity 9
Operation 11
Cleaning & Care 18
Specifications 18
3
Ensure to read all instructions and warnings in this user guide prior to first use. Retain this
user guide for future reference.
•Do not position the monitor on unstable surfaces. If the monitor falls, it may lead to
damage and injuries to people around its vicinity.
•Do not place the monitor near heat sources (for example, heaters, stoves, fireplaces).
•Do not use the monitor in areas lacking adequate ventilation.
•Do not open the back panel of the monitor as it contains a high-voltage current even
when unplugged.
•Do not place heavy objects on the monitor, its power cord, or any other connected
cable.
•The back of this monitor is designed with ventilation holes. Do not cover or block them
as this may cause overheating and damage.
•Do not insert or spray anything into the vents of this monitor.
•Unplug the monitor if it will not be used for an extended period.
•Ensure the monitor is unplugged before cleaning.
•Do not use cleaning alcohol, ammonia-based liquids, or other harsh cleaners when
cleaning the monitor.
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing Administrator, Inc. in the United States, and other
countries.
SAFETY & WARNINGS
4
AMonitor (x1)
BStand stem (x1)
CStand base (x1)
DStand plate (x1)
EScrew (x4)
FVESA connector (x4)
GDisplayPort cable (x1)
HPower cable (x1)
IPower adapter (x1)
JUser guide (x1)
COMPONENTS
5
Ports
1 Menu/enter button
2 Down button
3 Up button
4 Exit button
5 Power button
6 LED indicator
7 3.5mm headphone jack
8 DisplayPort port
9 HDMI port (x1 HDMI 2.0, x2 HDMI 1.4)
10 Power port
OVERVIEW
HDMI 2.0
HDMI 1.4
6
1. Ensure all components are present before disposing of any packaging. Using a
screwdriver (not supplied), secure the stand stem (B) to the stand base (C) with one
screw.
2.Press the release button to remove the stand plate (D) from the packaging.
3.Using a screwdriver, secure the stand plate (D) onto the stand stem (B) with two
screws.
STAND ASSEMBLY
Stand stem
Screw
Stand base
Release button
Foam
Stand plate
7
4.Take out the monitor (A) and lay it on a flat surface.
5.Pull the release button on the stand plate (D) upwards and clamp the monitor (A)
onto the stand stem (B) and stand plate (D).
Release button
8
Release button
1. Open the packaging, and with the foam attached, take out the monitor (A) and place
it gently on a flat surface. Remove the foam covering the back of the monitor. If the
monitor is attached to the stand stem (B) or stand base (C), detach it.
2.Take out the stand stem (B) and stand base (C) from the packaging. Press the release
button to remove the stand plate (D).
3.Using a screwdriver, loosen the four screws on the back of the monitor.
4.Mount the monitor with the steps provided with the VESA mount. Ensure to use the
loosened screws from the previous steps to secure the monitor to the mount.
VESA MOUNT
Notes:
•The mounting hole distance for this monitor is 75 x 75mm.
•VESA mount and mounting accessories are not included.
Release button
Foam
Stand plate
Mount
(not supplied)
9
The panel on the bottom of the monitor can be removed
to gain easier access to the input ports. Replace the
panel when done.
Power adapter
Connect one end of the power adapter into the power port of the monitor then connect the
battery end into one end of the power cable, Plug the power cable into a power socket.
DisplayPort
To allow the monitor to receive DisplayPort signals from your computer, plug in one end of
the provided DisplayPort cable into the DisplayPort port on the monitor. Plug the other end
of the cable into the DisplayPort port on the computer.
CONNECTIVITY
Power adapter
Power cable
DisplayPort cable
Detachable
panel
10
HDMI
To allow the monitor to receive HDMI signals from the computer, plug one end of an HDMI
cable (not supplied) into the monitor. Plug the other end of the cable into the HDMI output
port on your computer.
Earphones
Plug in earphones (not supplied) into the 3.5mm headphone jack on the monitor.
HDMI cable (not supplied)
Earphones (not supplied)
Note:
If audio devices are plugged into the monitor and computer, there will be no sound.
Tabla de contenidos
Otros manuales de Monitor de Kogan
Kogan
Kogan KAMN24QUCMA Manual de usuario
Kogan
Kogan KAMN15CDA Manual de usuario
Kogan
Kogan KAMN32QF7TB Manual de usuario
Kogan
Kogan KAMN32RT1SA Manual de usuario
Kogan
Kogan KAMN24FXSA Manual de usuario
Kogan
Kogan KALED30MONA Manual de usuario
Kogan
Kogan KAMN27Q18CSA Manual de usuario
Kogan
Kogan KAMN34FXQULB Manual de usuario
Kogan
Kogan KAMN34F1QULA Manual de usuario
Kogan
Kogan KAMN24F75LB Manual de usuario
Kogan
Kogan KAHUDQ7GPSB Manual de usuario
Kogan
Kogan KAMN24F7CSB Manual de usuario
Kogan
Kogan KALED27MONSC Manual de usuario
Kogan
Kogan KAMN32F16PA Manual de usuario
Kogan
Kogan KAMN22FNSA Manual de usuario
Kogan
Kogan KAMN29UHWLA Manual de usuario
Kogan
Kogan KAMN30FUSA Manual de usuario
Kogan
Kogan KAMN27QFSB Manual de usuario
Kogan
Kogan KAMN32F16LB Manual de usuario
Kogan
Kogan KAMN34F1QULB Manual de usuario
