Intermec EasyCoder PF2i Manual de usuario

Installation

Instructions

CPU Board

for EasyCoder

PF2/4i, PX4/6i &

PM4i

2 CPU Board—Installation Instructions

Before starting to replace the CPU board, take precautions

against electrostatic discharges.

All EasyCoder PF2/4i, PX4/6i and PM4i printers

Replace the CPU board this way:

• Switch oﬀ the power.

• Remove the front/left-hand cover.

• Remove any optional interface boards.

• Disconnect all cables from the CPU board.

• Remove the four #T20 Torx screws and the hexagonal spacer that hold

the CPU board to the plate that covers the power supply unit.

• Lift out the CPU board and remove all SIMMs and any real time

clock.

• Fit the SIMMs and possibly the real-time clock on the new board and

install it in reverse order.

Note: Refer to the Service Manual of each respective printer for

illustrations and instructions.

CPU Board—Installation Instructions 3

EasyCoder PM4i and PX4/6i printers only

e same CPU-board can be used for a range of EasyCoder printers.

However, the ﬁrmware cannot detect in which type of printer the CPU

board is installed. All replacement CPU boards are preprogrammed for

the EasyCoder PF2/4i-series printers, which means that replacement

CPU boards must always be reconﬁgured after being installed in an Easy-

Coder PM4i or PX4/6i printer.

If the printer feeds out labels in a peculiar way, the CPU board may be

conﬁgured for the wrong type of printer (there is a diﬀerence in the dis-

tance between the dot line and the LSS position).

You can easily check if the CPU board is correctly conﬁgured by printing

the “Hardware Info” or “HW” test label in the Setup Mode or sending

the Fingerprint instruction PRINT VERSION$(1).

If the CPU board needs to be reconﬁgured, do the following:

• Switch oﬀ the power.

• Insert a conﬁguration card in the memory card slot. Conﬁguration

cards can be ordered from Intermec via your local service organiza-

tion. Alternatively, the conﬁguration ﬁle (TYPESET.PRG) can be

downloaded from the Intermec Global Sales & Service website and

transferred to a CompactFlash memory card which is then utilized in

the same manner.

• Switch on the power.

• Select the correct printer type from the menus shown in the display

window.

• Switch oﬀ the power.

• Remove the card.

• Switch on the power again and check.

Intermec Technologies Corporation

Corporate Headquarters

6001 36th Avenue West

Everett, WA 98203

tel 425.348.2600

fax 425.355.9551

www.intermec.com

*1-960616-02*

CPU Board—Installation Instructions

*1-960616-02*

Otros manuales para EasyCoder PF2i

14

Este manual sirve para los siguientes modelos

4

Tabla de contenidos

Otros manuales de Accesorios de impresora de Intermec

Intermec

Intermec PB50 Manual de usuario

Intermec

Intermec EasyCoder F2 Manual de usuario

Intermec

Intermec 4630 Manual de usuario

Intermec

Intermec EasyCoder 601XP Manual de usuario

Intermec

Intermec EasyCoder F2 Manual de usuario

Intermec

Intermec PM4I Manual de usuario

Intermec

Intermec EasyCoder 101 Manual

Intermec

Intermec EasyCoder 501 E Manual de usuario

Intermec

Intermec EasyCoder F4 Manual de usuario

Intermec

Intermec ESim v4.20 Manual de usuario

Intermec

Intermec 825-192-001 Manual de usuario

Intermec

Intermec PB42 Manual

Intermec

Intermec EasyCoder F4 Manual de usuario

Intermec

Intermec PW50 Manual de usuario

Intermec

Intermec EasyCoder 3400d Manual de usuario

Intermec

Intermec EasyCoder 501 SA Manual de usuario

Intermec

Intermec 3600 Manual de usuario

Intermec

Intermec EasyCoder 501 SA Manual de usuario

Intermec

Intermec 3240 Manual de usuario

Intermec

Intermec PB2 Series Manual

Intermec

Intermec EasyCoder PD41 Manual de usuario

Intermec

Intermec EasyCoder 501 SA Manual de usuario

Intermec

Intermec EasyCoder 4420 Manual de usuario

Intermec

Intermec EasyCoder 501XP Manual de usuario

Manuales populares de Accesorios de impresora de otras marcas

Star Micronics

Star Micronics TSP800 Series Manual de usuario

REA

REA JET HR pro 2K Manual de usuario

HP

HP Laserjet,Color Laserjet 4si Manual de usuario

oliser

oliser MS 45 Manual de usuario

Roland

Roland DU2-64 Instrucciones y recetas

Xerox

Xerox EFI EXP6000 Manual de usuario

Canon

Canon Finisher-T1 Manual de usuario

Sharp

Sharp FO-1MK Manual de usuario

Labelmate

Labelmate PM-300 Manual de usuario

Epson

Epson T6248 Manual de funcionamiento

Epson

Epson OT-BZ20 Manual de usuario

Canon

Canon TonerRobot EP-27 Manual de usuario

Ricoh

Ricoh LCIT RT5100 Guía de inicio rápido

GBC

GBC 16 Series Manual de usuario

Canon

Canon INNER 2-WAY TRAY-E1 Manual de operación y mantenimiento

Develop

Develop SD-509 Manual de usuario

Kyocera

Kyocera KM-6230 Manual

Triumph Adler

Triumph Adler DF-710 Manual