Gofanco HDMIExt2 Manual de usuario

HDMI CAT5e/6 Extender with

IR - 50m

User's Guide

G4-0034A

P/N: HDMIExt2

Thank you for purchasing from gofanco. Our

products aim to meet all your connectivity needs

wherever you go. For optimum performance

and safety, please read the instructions carefully

and keep this User’s Guide for future reference.

If you need more information about our

products, please visit www.gofanco.com. For

technical support, please email us at

[email protected]. For drivers/manuals

download, please go to http:/ww.gofanco.com/

download.

Important Safety Notices

Please read safety instructions carefully before

installation and operation.

• Please pay close attention to all warnings

and hints for this device

• Do not expose this unit to rain, heavy

moisture, or liquid

• Do not repair the device or open the

enclosure without professional guidance

to avoid electric shocks. Doing so may void

your warranty

• Keep the product in a well-ventilated

location to avoid damage from overheating

• Shut off power and make sure environment

is safe before installation

• Do not plug the HDMI cables and IR cables

in/out when the device is in use to avoid

cable damage. Make sure they are plugged

into the correct ports

• Use the included DC5V power adapters

only. Make sure the specification matches if

using 3rd-party DC power adapters

Transmitter (TX) (1pc) Receiver (RX) (1pc) User's Manual (1pc)

Power Adapter (2pcs) IR Blaster Extension

Cable (1pc)

IR Receiver Extension

Cable (1pc)

Introduction

The HDMI CAT5e/6 Extender with IR - 50m

extendshighdefinition1080pHDMIsignalsfrom

a source device to a display device up to 50

meters using an economical CAT5e/6 cable.

Features

• TransmitsHDMIsignalsfromsourcedevice

to display device up to 50 meters using

economical CAT5e/6 cabling

• Supports IR remote control function to

control the source device from long

distances

• Easy and clean installation

PackageContents

Installation Requirements

1. HDMI source device (computer, DVD

player, XBOX, PS3, etc)

2. HDMI display device (SDTV/Monitor,

HDTV/Monitor, projector, etc.)

3. UTP/STP CAT5e/6 cable following

IEEE-568B wiring standard

Product Layout

Figure 1: Transmitter (TX)

1. HDMI Out Connects to a local HDMI display

2. Link LED Lights up when HDMI input signal detected

Flashes when no HDMI input signal detected

3. HDMI Input Connects to the HDMI source device

4. IR Output Connects to the IR Blaster extension cable

5. RJ45 Output Connects to the Receiver's RJ45 Input port

using a CAT5e/6 cable

6. Reset Button Press the button to reset the transmitter

7. Power Jack Connects to the included power adapter

Figure 2: Receiver (RX)

1. Reset Button Push the button to reset the receiver

2. RJ45 Input Connects to the Transmitter's RJ45 Output

port using a CAT5e/6 cable

3. Link LED Lights up when RJ45 from TX detected

Flashes when RJ45 from TX not detected

4. Power Jack Connects to the included power adapter

5. HDMI Out Connects to remote HDMI display

6. IR Input Connects to the IR receiver extension cable

Hardware Installation

1. Power off all devices including your HDMI

source and HDMI display(s).

2. Connect your HDMI source device to the

Transmitter's HDMI Input connector with

an HDMI cable (HDMI cable not included).

3. Optional: Connect a HDMI display to the

Transmitter's HDMI out connector with an

HDMI cable (HDMI cable not included) for

local monitoring of the HDMI signal.

4. Optional: Connect the IR Blaster Extension

Cable to the Transmitter's IR output port.

Face the eye towards your HDMI source

device's IR window. This connection is

needed only if you need to control your

HDMI source from the remote location.

5. Plug your CAT5e/6 cable between the

Transmitter's RJ45 Output and Receiver's

RJ45 Input.

6. Connect your HDMI display to the

Receiver's HDMI ouput connector with a

HDMI cable (HDMI cable not included).

7. Optional:ConnecttheIRReceiverExtension

Cable to the Receiver's IR input port. This

connection is needed only if you need to

control your HDMI source device from the

remote location.

8. Plug the included power adapters into the

Transmitter's and Receiver's power jacks,

then plug both power adapters into a

reliable power source.

9. Power on all connected devices.

10. The HDMI extender is ready for use.

Application

Transmitter (TX)

Receiver (RX)

CAT5e/6 Cable

IR Blaster

Extension Cable

IR Receiver Extension Cable

HDMI Out

HDMI In

Display

DVD

FAQ & Solutions

Q: There is no video output or audio and

video display is not normal:

A: 1) Press the Receiver's reset button to reset

the unit.

2) Use a shorter network cable.

Q: The Receiver's Link LED is flashing:

A: 1) Make sure the network cable follows the

IEEE-568B wiring standard.

2)CheckwhetherTXhasHDMIsignalinput.

3) Reset both TX & RX and reconnect.

Q: The extender is not working properly:

A: 1) Please check the cable lengths below:

- HDMI cables: Up to 5m

- Network cables (CAT5e/6): Up to 50m

2) Press the reset button on the TX/RX and

reconnect.

Q: RX Link LED is on but there is no image:

A: 1) Press RX reset button to reset the unit.

2) Make sure the HDMI cable is firmly

connected to the display.

3) Use a higher quality network cable.

Specifications

Item Specifications

HDMI Compliance 1.4a

HDCP Compliance 1.2a

Video Bandwidth 225MHz (10.2Gbps)

Resolution

480i@60Hz, 480p@60Hz, 576i@50Hz,

576p@50Hz, 720p@50/60Hz,

1080i@50/60Hz, 1080p@50/60Hz

Audio Support PCM, AC3, DTS

Input TMDS Signal 1.2Vp-p

Loop-out on TX One HDMI loop-out on TX

IR Passback Yes

IR Frequency Range 20KHz-60KHz

Operating Temperature 32° - 140° F (0° - 60° C)

Power Adapter Output: 5VDC/2A

Power Consumption TX: <3W / RX: <2W

Product Dimensions 2.8" (L) x 2.6" (W) x 0.97" (H)

Weight TX: 0.18 lbs / RX: 0.17 lbs

Color Black

Tabla de contenidos

Otros manuales de Extensor de gofanco

gofanco

gofanco PRO-HDBaseT-U Manual de usuario

gofanco

gofanco HD14Ext Manual de usuario

gofanco

gofanco HD14Ext1xN Manual de usuario

gofanco

gofanco HDwireless100-LT Manual de usuario

gofanco

gofanco HDBaseT Manual de usuario

gofanco

gofanco KVMHD20Ext Manual de usuario

gofanco

gofanco HDExtCoax Manual de usuario

gofanco

gofanco HDwirelessMini Manual de usuario

gofanco

gofanco HD20Ext-LT Manual de usuario

gofanco

gofanco HDMIExt8P Manual de usuario

gofanco

gofanco HD20Ext Manual de usuario

gofanco

gofanco HDExtIP4K Manual de usuario

gofanco

gofanco HDExt50 Manual de usuario

gofanco

gofanco AudioCATExt Manual de usuario

gofanco

gofanco HDbitTPro Manual de usuario

gofanco

gofanco HDwireless200 Manual de usuario

gofanco

gofanco KVMHDExt Manual de usuario

gofanco

gofanco CAT5E Manual de usuario

gofanco

gofanco HDBITT4K22 Manual de usuario

gofanco

gofanco HD20Ext1xN Manual de usuario

gofanco

gofanco HD20Ext-Cas Manual de usuario

gofanco

gofanco AudioCATExt500 Manual de usuario

gofanco

gofanco HDMIExtSplit Manual de usuario

gofanco

gofanco HD14Ext-EDID Manual de usuario

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario

gofanco HDMIExt2 Manual de usuario

Manuales populares de Extensor de otras marcas