Digi XBee Wi-Fi Cloud Kit Manual de usuario

XBee Wi-Fi Cloud Kit

Radio Frequency (RF) Modules

Getting Started Guide

Revision history—90002195

Revision Date Description

A November

2013

Initial release

B February

2014

Improved the quality of the images and corrected part number

discrepancies.

C May 2014 Updated the graphics of the loose components to match the loose

components and other accessories that are currently available with the kit.

D July 2014 Completed a major overhaul of the document including reformatting,

updating links and graphics, adding information for clarity.

E August

2016

Converted to the new MadCap Flare format with minor updates.

Trademarks and copyright

Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United

States and other countries worldwide. All other trademarks mentioned in this document are the

property of their respective owners.

Disclaimers

Information in this document is subject to change without notice and does not represent a

commitment on the part of Digi International. Digi provides this document “as is,” without warranty of

any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or

merchantability for a particular purpose. Digi may make improvements and/or changes in this manual

or in the product(s) and/or the program(s) described in this manual at any time.

Warranty

To view product warranty information, go to the following website:

www.digi.com/howtobuy/terms

Send comments

Documentation feedback: To provide feedback on this document, send your comments to

techcomm@digi.com.

Customer support

Digi Technical Support: Digi offers multiple technical support plans and service packages to help our

customers get the most out of their Digi product. For information on Technical Support plans and

pricing, contact us at +1 952.912.3456 or visit us at www.digi.com/support.

XBee Wi-Fi Cloud Kit Getting Started Guide 2

Contents

Introduction to your XBee Wi-Fi Cloud Kit

XBee Wi-Fi development board components and descriptions

Set up your XBee Wi-Fi Cloud Kit

Configure your XBee Wi-Fi module using the Wi-Fi interface 10

Add your XBee Wi-Fi module to your Remote Manager account 10

Create a Remote Manager account 10

Add your XBee Wi-Fi module to Remote Manager 11

Configure widgets on your XBee Wi-Fi sample web application 12

How widgets work on the XBee Wi-Fi dashboard 12

Add widgets to your dashboard 13

Edit (and customize) widget settings 14

Remove widgets from your dashboard 15

Viewing widget source code 16

XBee Wi-Fi application exercise

Create a temperature sensor 19

Assemble the parts 19

Configure the radio 19

Wire up the circuit 20

View it 23

Use it 24

Do more with your XBee Wi-Fi Cloud Kit

Configure your XBee Wi-Fi module 26

Configure your XBee Wi-Fi module with Remote Manager 26

Configure your XBee Wi-Fi module with XCTU 28

Create XBee Wi-Fi applications 34

Learn more about XBee Wi-Fi

Connect your application to the cloud 36

Collaborate and share your story 36

Create your own applications 36

Additional services 36

XBee Wi-Fi Cloud Kit Getting Started Guide 3

XBee Wi-Fi Cloud Kit Getting Started Guide 4

Troubleshooting

XBee device fails to join wireless network 38

Check if the Associate LED is solid green 38

Check if the Associate LED is double-blinking green 38

Check if the Associate LED is lit 39

XBee device does not show up under listed devices 39

Potential cause 39

Resolution 39

XBee device is listed in the wireless networks but cannot connect 39

Potential cause 39

Resolution 39

XBee Wi-Fi dashboard does not work with the XBee device 40

Check if the XBee device is properly connected to your wireless network 40

Check if the changes made to the XBee Wi-Fi development board are reflected on the XBee

Wi-Fi dashboard 40

Check if certain functions within the XBee Wi-Fi sample web application are working as

expected 40

Introduction to your XBee Wi-Fi Cloud Kit

The XBee Wi-Fi Cloud Kit shows you how to set up your XBee Wi-Fi hardware and configure its sample

web application. You can see sensor data from your development board on the web, as well as send

data and commands from the web to your device. The components in this kit allow you to create

customized solutions for connected devices.

The XBee Wi-Fi sample web application integrates with Remote Manager to enable two-way

communication over the Internet, giving you remote control of your device wherever you are. This

application also allows you to customize your dashboard widgets so that you can create your own

connected device systems.

The following sections guide you through your kit setup for cloud-based access:

nXBee Wi-Fi development board components and descriptions

nSet up your XBee Wi-Fi Cloud Kit

nXBee Wi-Fi application exercise

nDo more with your XBee Wi-Fi Cloud Kit

nLearn more about XBee Wi-Fi

nTroubleshooting for XBee Wi-Fi Cloud Kit kit

XBee Wi-Fi Cloud Kit Getting Started Guide 5

XBee Wi-Fi development board components and

descriptions

The following table provides descriptions of the XBee Wi-Fi development board components.

XBee Wi-Fi Cloud Kit Getting Started Guide 6

XBee Wi-Fi development board components and descriptions

XBee Wi-Fi Cloud Kit Getting Started Guide 7

Development

board

components Description

1 Associate LED Indicates wireless connection status to local access point.

nSolid green: The XBee module is not connected to a local access

point.

nFlashing green: The XBee is connected to a local access point and

Remote Manager.

nTwo short double blinks: The XBee is connected to a local access

point, but not Remote Manager.

TCP/IP LED An output light connected to one of the GPIO pins that allows you to turn it on

or off using commands sent from Remote Manager.

User LED An output light that acts as a second User LED that allows you to turn it on or

off using commands sent from Remote Manager.

2 LED gauge The LED gauge indicates analog value ranging from 0-10 LEDs and is

controlled through the XBee Wi-Fi dashboard.

3 Vibration

motor

The vibration motor indicates change in status.

4 Buzzer The buzzer acts as an alarm to indicate trouble. It is loudest at 2 kHz, but

works at a range of frequencies. You can also control the frequency of the

buzzer through the dashboard using the buzzer frequency slider. Use the

buzzer toggle widget to turn the buzzer on or off.

5 Slide switch The XBee Wi-Fi dashboard indicates the state of the slide switch. The switch

stays either on or off.

6 Breadboard The rectangular plastic board that lets you easily insert electronic

components for testing purposes. This is useful for prototyping electronic

circuits.

7 Push button The state of the push button is displayed on the XBee Wi-Fi dashboard. The

button appears ON only when actively being pushed.

8 Potentiometer The potentiometer displays on the XBee Wi-Fi dashboard as a speedometer

gauge, progress bar, or graph. You can control the potentiometer by turning

the adjustable knob left or right.

9 Barrel jack Accepts 4.5V to 24V through the development board. You can also use the

barrel jack with the battery pack provided with the kit.

10 USB jack The USB jack has two purposes:

1. To power the development board up to 5V.

2. To provide serial port access to the XBee Wi-Fi for configuration or

sending and receiving data to and from Remote Manager.

XBee Wi-Fi development board components and descriptions

XBee Wi-Fi Cloud Kit Getting Started Guide 8

Development

board

components Description

11 XBee reset The XBee reset is connected to the XBee Wi-Fi reset pin. You can reconfigure

it via the USB port.

12 DIP switches These switches allow components on the XBee Wi-Fi development board to

disconnect from the XBee. If the switch is away from the XBee, the XBee pin

is connected to that built-in widget on the XBee Wi-Fi dashboard. If the switch

is towards the XBee, the XBee pin disconnects from that component.

Note When you are using loose components or doing advanced prototyping,

you may need to disconnect the built-in component from the XBee pin.

13 Prototyping

headers

The prototyping headers allow connection to all pins of the XBee Wi-Fi. Use

the prototyping headers to connect to your own circuits including those using

the loose components that came with your kit.

14 Commissioning

button

Press the commissioning button four times to reset the network parameters

and reactivate Soft AP mode.

Set up your XBee Wi-Fi Cloud Kit

The XBee Wi-Fi Cloud Kit includes access to a sample web application that makes it quick and easy to

work with your XBee device. The XBee Wi-Fi sample web application integrates with Remote Manager

to enable two-way communication over the Internet, giving you remote control of your device

wherever you are. This application also allows you to customize your dashboard widgets so that you

can create your own connected device systems.

Configure your XBee Wi-Fi module using the Wi-Fi interface 10

Add your XBee Wi-Fi module to your Remote Manager account 10

Configure widgets on your XBee Wi-Fi sample web application 12

XBee Wi-Fi Cloud Kit Getting Started Guide 9

Set up your XBee Wi-Fi Cloud Kit Configure your XBee Wi-Fi module using the Wi-Fi interface

XBee Wi-Fi Cloud Kit Getting Started Guide 10

Configure your XBee Wi-Fi module using the Wi-Fi interface

By now you should have already verified the contents of your XBee Wi-Fi Cloud Kit, connected the

hardware, and configured your XBee to connect to a local Wi-Fi access point.

1. If you have not yet configured your XBee to connect to a local Wi-Fi access point, follow the

instructions in the Quick Start Guide that came in your kit, or find the XBee Wi-Fi Cloud Kit

Quick Start Guide online at Digi.com.

2. If your module is not able to connect to your Wi-Fi access point, it returns to Soft AP

configuration mode, and you are required to repeat the configuration steps. Keep in mind that

your SSIDand password are case sensitive.

3. If you are still having trouble connecting your XBee Wi-Fi to a local access point, see

Troubleshooting.

Add your XBee Wi-Fi module to your Remote Manager account

The XBee Wi-Fi Cloud Kit includes access to a sample web application that makes it quick and easy to

work with your XBee device. The XBee Wi-Fi sample web application integrates with Remote Manager

to enable two-way communication over the Internet, giving you remote control of your device

wherever you are. This application also allows you to customize your dashboard widgets so that you

can create your own connected device systems.

You must have a Remote Manager account to use the features of the XBee Wi-Fi sample web

application.

nIf you do not yet have a Remote Manager account, go to Create a Remote Manager account.

nIf you already have an account, go to Add your XBee Wi-Fi module to Remote Manager.

Create a Remote Manager account

Remote Manager enables you to set up and manage dynamic device networks. Your free developer

account lets you explore Remote Manager's application development and device management tools,

with a limited number of devices and transactions. With this developer account you discover how

Remote Manager's suite of device management and application development tools can help you

realize your machine-to-machine (M2M) solution. When you are ready to expand your Remote Manager

access, complete the following steps.

To create your free Remote Manager account:

Tabla de contenidos

Otros manuales de Unidad de control de Digi

Digi

Digi XBee ZNet 2.5 Manual de usuario

Digi

Digi WB-20 Manual de usuario

Digi

Digi Connect Series Guía del usuario

Digi

Digi XBee Manual de usuario

Digi

Digi XBee Manual de usuario

Digi

Digi INFOTAG 2.13 Manual de usuario

Digi

Digi XBee SX 868 Manual de usuario

Digi

Digi Connect ME 9210 Manual de usuario

Digi

Digi XBee3-PRO Micro Guía rápida de usuario

Digi

Digi Connect Wi-Wave Guía de aplicación

Digi

Digi ConnectCore Wi-9P 9215 Guía de aplicación

Digi

Digi XBee Manual de usuario

Digi

Digi XBee Manual de usuario

Digi

Digi Digi One EM Guía de aplicación

Digi

Digi ConnectCore XP 270 Guía de aplicación

Digi

Digi ConnectCore 9P 9215 Guía de aplicación

Digi

Digi XBee-PRO 900HP Manual de usuario

Digi

Digi XBP09-XC... Manual de usuario

Digi

Digi XBEE PRO S2C Manual de usuario

Digi

Digi PS2CSM Manual de usuario

Digi

Digi ConnectCore 9M 2443 Guía de aplicación

Digi

Digi XLR PRO Manual de usuario

Digi

Digi XBee3 DigiMesh 2.4 Manual técnico

Digi

Digi XBee 3 Guía rápida de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario