Digi ConnectCore 6UL Guía rápida de usuario

ConnectCore® 6UL

SBC Express

Hardware Reference Manual

Revision history—90001520

Revision Date Description

01 October

2016

Alpha release

A June

2017

Modified regulatory and certification information as required by RED (Radio

Equipment Directive); added mechanical drawings.

B January

2020

Clarified VCC_LICELL voltage specifications.

Trademarks and copyright

Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United

States and other countries worldwide. All other trademarks mentioned in this document are the

property of their respective owners.

Disclaimers

Information in this document is subject to change without notice and does not represent a

commitment on the part of Digi International. Digi provides this document “as is,” without warranty of

any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or

merchantability for a particular purpose. Digi may make improvements and/or changes in this manual

or in the product(s) and/or the program(s) described in this manual at any time.

Warranty

To view product warranty information, go to the following website:

www.digi.com/howtobuy/terms

Customer support

Gather support information: Before contacting Digi technical support for help, gather the following

information:

Product name and model

Product serial number (s)

Firmware version

Operating system/browser (if applicable)

Logs (from time of reported issue)

Trace (if possible)

ConnectCore 6UL SBC Express Hardware Reference Manual 2

ConnectCore 6UL SBC Express Hardware Reference Manual 3

Description of issue

Steps to reproduce

Contact Digi technical support: Digi offers multiple technical support plans and service packages.

Feedback

To provide feedback on this document, email your comments to

techcomm@digi.com

Include the document title and part number (ConnectCore 6UL SBC Express Hardware Reference

Manual, 90001520 B) in the subject line of your email.

Contents

About the ConnectCore 6UL SBC Express

Features and functionality 6

Placement 7

Top view 7

Bottom view 8

Block diagram 9

Interfaces

Power connector 11

Coin cell connector 12

Boot mode 13

Boot from USB 14

Power and reset buttons 15

JTAG 17

SWD 19

Console port 21

MicroSD 23

10/100 Mbps Ethernet 24

Ethernet PHY power management 25

Embedded antenna 26

USB host 27

USB device 28

Expansion connector 30

Pinout of the Raspberry Pi expansion connector 33

Grove connectors 34

User LED and button 36

Specifications

Electrical specifications 38

Supply voltages 38

Power consumption 38

Mechanical specification 39

Top view 39

Bottom view 40

Profile view 40

Environmental specifications 40

ConnectCore 6UL SBC Express Hardware Reference Manual 4

ConnectCore 6UL SBC Express Hardware Reference Manual 5

Regulatory information

Maximum power and frequency specifications 42

Europe 42

Declarations of Conformity 42

CE mark 42

About the ConnectCore 6UL SBC Express

The ConnectCore 6UL SBC Express is a compact board featuring the Digi ConnectCore 6UL System-on-

module (SoM). The ConnectCore 6UL System-on-module integratesan NXP i.MX6UL application

processor with DDR3 and NAND flash memory, WLAN/Bluetooth, power management IC, a crypto-

authentication security chip, and a Microcontroller AssistTM (MCA) for additional functionality.

The Digi ConnectCore 6UL SBC Express is a development board for evaluating the Digi ConnectCore

6UL System-on-module. The reference-design castellated edge development board enables you to

explore and develop firmware before designing your own custom carrier board.

Features and functionality

lConnectCore 6UL module

oi.MX6UL single ARM Cortex-A7 core operating at speeds up to 528 MHz

o16-bit DDR3-800 memory interface with a density up to 1GB

o8-bit SLC NAND flash with density up to 2GB

oIEEE 802.11 a/b/g/n/ac WLAN and Bluetooth 4.2 dual mode

lPower from either micro USB console connector or dedicated 5V power connector

lBoot source configuration: NAND flash, USB for recovery

lCoin-cell connector to supply the on-module real-time clock (not populated by default)

lPower and reset button

lDebug:

oStandard IEEE 1149.1 JTAG interface

oSingle Wired Debug (SWD) interface for the Microcontroller AssistTM (MCA)

oSerial console through USB micro AB-type connector

lStorage:

omicroSD card

oNAND flash

lCommunication:

o10/100 Mbps Ethernet interface

oTwo USB Host 2.0 with stacked USB A-type connector

ConnectCore 6UL SBC Express Hardware Reference Manual 6

About the ConnectCore 6UL SBC Express Placement

ConnectCore 6UL SBC Express Hardware Reference Manual 7

oUSB device with micro AB USB connector (shared with one USB host port)

oSISO IEEE 802.11 a/b/g/n/ac + Bluetooth 4.2 dual mode interface with on-board antenna

lExpansion:

oExpansion connector that can accommodate Raspberry PI Hat boards

oThree Grove connectors providing digital, ADC, and I2C connectivity

lUser interface:

oOne user LED

oOne user button

lDimensions:

o87 mm x 63 mm

Placement

Top view

About the ConnectCore 6UL SBC Express Placement

ConnectCore 6UL SBC Express Hardware Reference Manual 8

Bottom view

About the ConnectCore 6UL SBC Express Block diagram

ConnectCore 6UL SBC Express Hardware Reference Manual 9

Block diagram

Interfaces

Power connector 11

Coin cell connector 12

Boot mode 13

Power and reset buttons 15

JTAG 17

SWD 19

Console port 21

MicroSD 23

10/100 Mbps Ethernet 24

Embedded antenna 26

USB host 27

USB device 28

Expansion connector 30

Grove connectors 34

User LED and button 36

ConnectCore 6UL SBC Express Hardware Reference Manual 10

Otros manuales para ConnectCore 6UL

Tabla de contenidos

Otros manuales de Unidad de control de Digi

Digi

Digi ConnectCore 6 Manual de usuario

Digi

Digi XBee SX 868 Manual de usuario

Digi

Digi Connect ME 9210 Manual de usuario

Digi

Digi Digi XBee SX Manual de usuario

Digi

Digi XBee-PRO XSC Manual de usuario

Digi

Digi ConnectCore 8X Guía rápida de usuario

Digi

Digi XBee3 DigiMesh 2.4 Manual técnico

Digi

Digi XBEE-PRO S3 Manual de usuario

Digi

Digi XBee Wi-Fi Cloud Kit Manual de usuario

Digi

Digi ConnectCore XP 270 Guía de aplicación

Digi

Digi XBee3 802.15.4 Manual de usuario

Digi

Digi Connect ME Guía de aplicación

Digi

Digi ConnectCore Guía rápida de usuario

Digi

Digi XBee 868LP Manual de usuario

Digi

Digi XBee ZigBee S2D Manual de usuario

Digi

Digi XTend vB DigiMesh Manual de usuario

Digi

Digi XBee Manual de usuario

Digi

Digi XBee3 DigiMesh 2.4 Manual de usuario

Digi

Digi Connect Wi-Wave 802.11 b/g Guía de aplicación

Digi

Digi XLR PRO Manual de usuario

Digi

Digi XBee Manual de usuario

Digi

Digi ConnectCore Wi-9P 9215 Guía de aplicación

Digi

Digi XBee ZigBee S2C Manual de usuario

Digi

Digi ConnectCore 9P 9215 Guía de aplicación

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario