Elo TouchSystems DMS-SA19P-EXTME Manual de usuario
Revision C
P/N E001012
www.elotouch.com
Quick Installation Guide
Expansion Module
for ESY-X Series
© 2017 Elo Touch Solutions, Inc. All rights reserved.
The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively “Elo”) makes no
representations or warranties with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a
particular purpose. Elo reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation
of Elo to notify any person of such revisions or changes.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer
language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior
written permission of Elo Touch Solutions, Inc.
Elo (logo) and Elo Touch Solutions are trademarks of Elo and its Affiliates.
North America
800-ELO-TOUCH
Tel +1 408 597 8000
Fax +1 408 597 8050
Europe
Tel +32 (0)16 70 45 00
Fax +32 (0)16 70 45 49
Asia-Pacific
Tel +86 (21) 3329 1385
Fax +86 (21) 3329 1400
Latin America
Tel 786-923-0251
Fax 305-931-0124
EloSales.LAT[email protected]
Elo Touch Solutions Technical Support
Online self-help:
www.support.elotouch.com
1x
Kit contents:
1x
4x
M4 Mounting screws
DMS-SA19P-EXTME
Model
name
Substance Name and concentration of hazardous substances
contained in product
醚
(Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE)
connector XOOOOO
Diode XOOOOO
Resistor XOOOOO
Crystal XOOOOO
Remove shield cover, cable cover, and stand. Retain the 4 screws for the
stand.
Connect module cable to computer, fasten with 4 screws included with
expansion module kit.
Reinstall cable cover, shield cover, and stand.
Otros manuales de Unidad de control de Elo TouchSystems
