CYP PUV-2100RX-AVLC Manual de usuario

PUV-2100RX-AVLC

HDBaseT™ 4K/HDR Receiver (100m)

OPERATION MANUAL

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer file, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

• To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufficient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 21/06/2019 First release

CONTENTS

1. Introduction...........................................6

2. Applications ...........................................6

3. Package Contents ..................................6

4. System Requirements ...........................7

5. Features..................................................7

6. Operation Controls and Functions .......8

6.1 Front Panel................................................... 8

6.2 Rear Panel..................................................... 9

6.3 IR Cable Pinouts .......................................10

6.4 RS-232 Bypass Pinout.............................10

6.5 Serial Control (Via USB Port)................10

6.6 Serial Commands (Via USB Port)........11

7. Connection Diagram .......................... 12

8. Specifications...................................... 13

8.1 Technical Specifications ........................13

8.2 Video Specifications................................14

8.3 Audio Specifications...............................15

8.4 Cable Specifications ...............................16

8.5 HDBaseT Features....................................17

9. Acronyms............................................. 17

1. INTRODUCTION

This HDBaseT 2.0 Receiver provides for the reception of 4K video with HDR

and high bitrate audio over a single Cat.6a/7 cable at distances of up to

100m (328 feet). This Receiver complies with the advanced HDCP 2.2 and

HDMI 2.0 standards, as well as supporting the legacy HDCP 1.x and HDMI

1.x standards. Despite HDBaseT’s 10.2Gbps bandwidth limitation, 4K UHD

HDMI video sources, up to and including 4K@60Hz (4:4:4, 8-bit) as well as

10/12-bit sources with HDR, are able to be received and processed by the

use of AVLC (Adaptive Visually Lossless Compression) when connected

to a compatible AVLC Transmitter. This receiver can also pass RS-232, IR,

Ethernet, and multiple audio streams across the same cable that carries

the video signal.

The selectable Audio Return Channel (ARC)/bi-directional optical audio

feature allows audio generated by an ARC-enabled TV to be to be sent

back to the Transmitter and output over the optical output for local

playback, or for optical audio to be exchanged bi-directionally between

the Transmitter and Receiver. This Receiver is powered directly by the

connected Transmitter, via 48V PoH (Power over HDBaseT), eliminating

the need for a separate power supply for the Receiver.

2. APPLICATIONS

Household entertainment sharing and control

Lecture room display and control

Showroom display and control

Meeting room presentation and control

Classroom display and control

3. PACKAGE CONTENTS

1×HDMI over HDBaseT 2.0 Receiver (PSE) with HDR/ARC

1×3.5mm to IR Extender Cable

1×Shockproof Feet (Set of 4)

1×Operation Manual

4. SYSTEM REQUIREMENTS

HDMI receiving equipment such as an HDTV, monitor or audio

amplifier.

A compatible HDBaseT Transmitter with 48V PoH (PSE) support is

required.

An HDBaseT 2.0 Transmitter equipped with AVLC support is strongly

recommended.

The use of “Premium High Speed HDMI” cables, and industry standard

Cat.6, Cat.6a or Cat.7, is highly recommended.

5. FEATURES

HDMI with HDR, 3D & 4K@60Hz support, DVI 1.0 compatible

HDCP 2.2 and HDCP 1.x compliant

Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input

and output

Supports 'Deep Colour' input and output up to 12-bit

Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output

Supports CEC bypass

HDBaseT input receives video, audio and data over a single Cat.5e/6/7

cable and can reach distances up to 100m/328ft at 4K when using

Cat.6a/7

HDBaseT feature support: HD Video and Audio, 100BaseT Ethernet,

48V PoH (PD), bi-directional optical audio and Control (bi-directional

IR/RS-232 pass-through)

Integrated AVLC (Adaptive Visually Lossless Compression) allows for

sources up to 18Gbps (600MHz) to be received from a compatible

Transmitter with no loss of visual quality

Selectable Audio Return Channel (ARC)/bi-directional optical audio

functionality

Powered via 48V PoH from Transmitter to Receiver

Note: A compatible PSE Transmitter providing 48V PoH is required to power

this Receiver. Transmitters from other brands may not be compatible.

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

AUDIO

SERVICE ARC

OPT

STD

POWER

LINKSWITCH

SERVICE ARC

OPT

STD

POWER

LINKSWITCH

AUDIO

PUV-2100RX-AVLC

1 2 3 4 5

1SERVICE Port: This port is reserved for firmware update and serial

control use only.

2ARC & OPT LEDs: These LEDs illuminate to indicate the current digital

audio source selected for sending to a compatible Transmitter’s

optical output.

Note: Using ARC as a source requires the HDMI output to be connected to

an ARC-compliant TV with ARC enabled.

3AUDIO SWITCH Button: This switch allows the user to select which

digital audio source to send back to a compatible Transmitter. A single

press toggles between modes.

ARC (Audio Return Channel): Sends the digital audio from a

connected ARC-compliant TV’s HDMI input.

OPT (Optical): Sends the digital audio from the Optical Input port.

4HQ/STD LEDs: These LEDs illuminate to indicate which AVLC mode

is selected by the connected Transmitter: HQ (High Quality) or STD

(Standard Quality).

5POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

Note: A compatible 48V PSE Transmitter is required to power this Receiver.

LINK LED: This LED will illuminate solidly when a live connection with

a compatible Transmitter is active.

6.2 Rear Panel

LANHDMI OUTCAT5e/6/7 ININOUTINOUT

RS-232

BYPASS

IR OPTICAL

1 2 3 4 5 6

1RS-232 BYPASS Port: Connect to a PC, laptop or serial controllable

device for the extension of RS-232 signals between both ends of the

HDBaseT connection.

2IR OUT Port: Connect to an IR Blaster to transmit IR signals from the

other end of the HDBaseT connection to devices within direct line-of-

sight of the IR Blaster.

IR IN Port: Connect to the provided IR Extender to extend the IR

control range of devices connected to the other end of the HDBaseT

connection. Ensure that the remote being used is within direct line-of-

sight of the IR Extender.

3OPTICAL OUT Port: Connect to powered speakers or an amplifier

for digital audio output using an appropriate optical cable. Audio is

sourced from the Optical Audio Input port on a connected compatible

Transmitter.

OPTICAL IN Port: Connect to the optical audio output of a device

such as a media player or game console using an appropriate optical

cable. Audio is sent to the Optical Audio Output on a connected

compatible Transmitter.

4CAT5e/6/7 IN Port: Connect to a compatible HDBaseT Transmitter

with a single Cat.5e/6/7 cable for transmission of all data signals.

48V PoH will also be supplied when connected to a compatible PSE

Transmitter.

5HDMI OUT Port: Connect to an HDMI TV, monitor or amplifier for

digital video and audio output.

6LAN Port: Connect to an Ethernet supporting device or to your local

network, as appropriate, to extend the network to both ends of the

HDBaseT connection.

6.3 IR Cable Pinouts

IR Blaster

Cabl

Infrared

Power

Not U

sed

IR Extender

Cabl

Infr

ared

Power

Ground

6.4 RS-232 Bypass Pinout

DCD

RxD

TxD

DTR

GND

CTS

RTS

DSR

DE-9 Male

Port

6.5 Serial Control (Via USB Port)

Serial Port Default Settings

Baud Rate 19200

Data Bits 8

Parity Bit None

Stop Bits 1

Flow Control None

Tabla de contenidos

Otros manuales de Receptor de CYP

CYP

CYP CA-USBST Manual de usuario

CYP

CYP PUV-1810RX-AVLC Manual de usuario

CYP

CYP AVX-101F-RX Manual de usuario

CYP

CYP PRO-HDMIFO-KIT Manual de usuario

CYP

CYP COH-TX1 Manual de usuario

CYP

CYP CH-103Rx Manual de usuario

CYP

CYP CH-331H-RX Manual de usuario

CYP

CYP PRO-HDMIFO-4K Manual de usuario

CYP

CYP CA-HDMI100R Manual de usuario

CYP

CYP CH-526RX Manual de usuario

CYP

CYP CH-U331RX Manual de usuario

CYP

CYP HDBaseT 5Play PUV-1510RX Manual de usuario

CYP

CYP 5-Play HDBaseT PU-507WPRX Manual de usuario

CYP

CYP CA-USBAT Manual de usuario

CYP

CYP CWHDI-Tx Manual de usuario

CYP

CYP CH-507RXWP Manual de usuario

CYP

CYP PUV-1650TX Manual de usuario

CYP

CYP PU-305BD-RX Manual de usuario

CYP

CYP RXWPBD Manual de usuario

CYP

CYP PU-DVI1109TX Manual de usuario

CYP

CYP 5-Play HDBaseT PU-507WPRX Manual de usuario

CYP

CYP CH-2538TXPLWPKD Manual de usuario

CYP

CYP AU-A300-HBT Manual de usuario

CYP

CYP CH-A320RX Manual de usuario

Manuales populares de Receptor de otras marcas

Garmin

Garmin GA 23 Manual de usuario

Aiphone

Aiphone PS-12F Manual de usuario

IMES

IMES TCS-01CA-PMI Manual de usuario

BWI Eagle

BWI Eagle AIR-EAGLE SR Manual

AMIMON

AMIMON AMN12310 WHDI Manual de usuario

Dual

Dual DMCPA79BT Instrucciones de funcionamiento

Sound Associates

Sound Associates SA652P Manual de usuario

Sherwood

Sherwood NewCastle R-772 Manual de usuario

Audio

Audio A10-RX Series Manual de usuario

AllSee

AllSee PushShare PSRV1.1 Manual de usuario

DEMAG

DEMAG DRC-DR D2 Manual de usuario

Teleco

Teleco TVRCL868A02 Manual de usuario

Bosch

Bosch RF3222E Manual de usuario

Kramer

Kramer 631R Manual de usuario

Xpress

Xpress xmc10 Manual de usuario

JVC

JVC KD-MR1BTS Manual de usuario

Omega Engineering

Omega Engineering UWTC-REC3 Manual de usuario

e-survey

e-survey E300 Pro Manual de usuario