CYP CH-526RX Manual de usuario
CH-526RX
HDMI Splitter with Audio over CAT5e/6/7 Receiver
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2014 by Cypress Technology.
All Rights Reserved.
Version 1.0 July 2014
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 26/05/14 Preliminary Release
RDV2 23/10/14 No YUV_420
RDV3 31/10/14 Restore YUV_420
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
6. Operation Controls and Functions....... 3
6.1 Front Panel ........................................3
6.2 Rear Panel.........................................4
6.3 IR Cable Pin Assignments ................4
6.4 D-Sub 9 Pin Denition.......................5
7. Connection Diagram ............................ 6
8. Specications ........................................ 7
9. Acronyms ............................................... 8
1
1. INTRODUCTION
This HDMI and Audio over Single CAT5e/6/7 Receiver/Splitter can
receive uncompressed audio/video and data over a single run of
CAT5e/6/7 cable, from a Transmitter, up to distances of 100m. It has
the added benet of simultaneous dual HDMI outputs with audio de-
embedding to a balanced or digital coaxial audio output and 2 bi-
directional LAN serving connections, allowing devices such as Smart
TVs or games consoles to share a Internet connection. The unit has a
bidirectional PoC (Power over Cable) function that can power or be
powered by a compatible transmitter allowing for greater exibility in
installations.
2. APPLICATIONS
• Extending incoming signal from CAT5e/6/7 to HDMI outputs
• Extending incoming signal from CAT5e/6/7 to both analog and
digital audio outputs
• Lecture room/Showroom/Meeting room/Classroom display and
control
3. PACKAGE CONTENTS
• 1 x HDMI Splitter with Audio over Single CAT5e/6/7 Receiver
• 1 x IR Receiver
• Operation Manual
4. SYSTEM REQUIREMENTS
HDBaseT compatible Transmitter input and output display with HDMI
input jack.
2
5. FEATURES
• Supports full range HDTV and PC output resolutions up to 4K2K and
WUXGA (RB)
• Receive uncompressed data over a single 100 m/328 ft CAT5e/6/7
cable
• 5Play™ convergence: Video, Audio, LAN, Bidirectional PoC &
Control (IR & RS-232 bypass)
• Supports bidirectional IR, Remote control and RS-232 (bypass)
• Provide with 24V DC power to or received from compatible PoC
Transmitter through CAT5e/6/7
• Supports Ethernet transmission rate up to 100Mbps
• Supports Balanced analog audio output (R/L) and HDMI input audio
sampling rate up to 192kHz
• Support coaxial digital audio up to 192kHz
Note:
1. The PoC function is designed for powering compatible Transmitter
units only—non-PoC Transmitter will need their own power supply.
Transmitters of another brand may not be compatible.
2. DO NOT connect the CAT5e/6/7 port with Transmitter's LAN/
CONTROL port. Doing so may trigger power shoot down and ruin
the device.
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
DC 24V LAN 1 LAN 2 CAT5e/6/7 IN IR 2
OUT
USB
IR 1
IN
1 2 3 3 4 5 6 7
1Power LED: This LED will illuminate when the device is connected to
a power supply.
2DC 24V: Plug the 24 V DC power supply into the unit and connect
the adaptor to an AC outlet. Only one side of power is needed to
activate both Transmitter and Receiver when both obtain the PoC
function.
3LAN 1/2: Connect to an active network for LAN sharing of a total
transmission rate up to 100Mbps. Or when a compatible LAN
equipped Transmitter is connected to an active network, this
allows the network access (including internet access if available)
to be shared between the Transmitter and Receiver. Connect any
Ethernet equipped device e.g. a Smart TV or games console to
the LAN port for that device to share the network internet access.
Note: DO NOT connect this slot with any of the CAT5e/6/7 port.
Doing so may trigger power shoot down and ruin the device.
4CAT5e/6/7 IN: Connect from the Transmitter unit with a Single
CAT5e/6 cable for receiving all data signals.
5IR IN: Connect to the supplied IR Receiver cables for IR signal
reception. Ensure that remote being used is within the direct line-
of-sight of the IR Extender.
6IR OUT: Connect to the supplied IR Blaster cable for IR signal
transmission. Place the IR Blaster in direct line-of-sight of the
equipment to be controlled.
7USB: This port is reserved for rmware update only.
4
6.2 Rear Panel
COAXIAL
OUT
RS-232
OUT
HDMI OUT 1 HDMI OUT 2
-
-
+
+
LR
1 2 3 3 4
1Balanced Analog R/L OUT: Connect to an amplier or active
speaker with 3.5mm terminal block jack for audio output.
2COAXIAL OUT: Connect to an amplier or active speaker with
coaxial cable for audio output.
3HDMI OUT 1/2: These slots are to connect with HDMI TV/Monitor for
output image display.
4RS-232 OUT: This slot is to connect with D-Sub 9-pin cable from
device equipment for receiving RS-232 commands.
6.3 IR Cable Pin Assignments
3
1
2
3
1
2
Power
IR Blaster Signal
NC
IR Signal
Power 5 V
Grounding
IR Receiver
IR Blaster
5
6.4 D-Sub 9 Pin Denition
Pin Dene TX/RX
1N/C
2TxD / RxD
3RxD / TxD
4N/C
5GND
6N/C
7N/C
8N/C
9N/C
Tabla de contenidos
Otros manuales de Receptor de CYP
CYP
CYP PU-305BDA-TX Manual de usuario
CYP
CYP HDMI Over CAT5 Manual de usuario
CYP
CYP CH-2538TXPLWPKD Manual de usuario
CYP
CYP AVIP-P5104R-B1C Manual de usuario
CYP
CYP PU-607BD-RX Manual de usuario
CYP
CYP RXWPBD Manual de usuario
CYP
CYP CH-107 RX Manual de usuario
CYP
CYP CRS-232 Manual de usuario
CYP
CYP PU-DVI1109TX Manual de usuario
CYP
CYP Dante AU-DTO4-RX Manual de usuario
CYP
CYP PUV-2606RX Manual de usuario
CYP
CYP CH-527RXVBD Manual de usuario
CYP
CYP PUV-1830RX-AVLC Manual de usuario
CYP
CYP PUV-1650TX Manual de usuario
CYP
CYP PUV-3050RX-UA Manual de usuario
CYP
CYP CH-A320RX Manual de usuario
CYP
CYP CWHDI-Tx Manual de usuario
CYP
CYP CH-507TX Manual de usuario
CYP
CYP CDVI-301TX & RX Manual de usuario
CYP
CYP CH-507RXWP Manual de usuario
