CYP CPLUS-V4H4HPA Manual de usuario

CPLUS-V4H4HPA

4K UHD+4 x 4 Matrix with Audio Output

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE (DD/MM/YY) SUMMARY OF CHANGE

RDV1 2019/07/12 Preliminary release

CONTENTS

1. Introduction......................................................1

2. Applications.....................................................1

3. Package Contents ..........................................1

4. SYSTEM REQUIREMENTS....................................2

5. Features............................................................2

6. Operation Controls and Functions.................3

6.1 Front Panel................................................. 3

6.2 Rear Panel.................................................. 5

6.3 Remote Control......................................... 6

6.4 IR Cable Pinout.......................................... 7

6.5 RS-232 Pinout and Defaults...................... 7

6.6 Front Panel LCD Menu.............................. 8

6.7 WebGUI Control...................................... 14

6.7.1 Switch Tab....................................... 16

6.7.2 EDID Settings Tab ........................... 19

6.7.3 System Settings Tab ....................... 21

6.8 Telnet Control.......................................... 22

6.9 Serial and Telnet Commands................ 23

7. Connection Diagram ....................................29

8. Specications ................................................30

8.1 Technical Specications ........................ 30

8.2 Video Specications............................... 31

8.3 Audio Specications............................... 32

8.3.1 Digital Audio................................... 32

8.3.2 Analog Audio................................. 33

8.4 Cable Specications .............................. 33

9. Acronyms.......................................................34

1. INTRODUCTION

This 4K UHD+ 4×4 HDMI Matrix provides the ability to connect up to four

4K UHD+HDMI sources to up to four 4K UHD+HDMI displays and freely

switch between them. This unit comes with full support for 18Gbps

resolutions up to, and including 4K@60Hz (4:4:4, 8-bit) as well as

support for 16-bit Deep Color, HDR (High Dynamic Range), HD audio

and other features dened by the HDMI 2.0 specication. With a

comprehensive EDID management feature that includes the ability to

select between built in EDIDs, EDIDs copied from connected sink

devices, as well as user provided EDIDs, this matrix can solve many

interconnectivity problems. The unit’s OSD has the ability to display up

to 2 lines of user customized text, on top of the video displayed over

each output, in the color of your choice. This unit provides an intuitive

set of front panel controls with an OSD as well as RS-232, Telnet,

WebGUI, and IR remote control options.

2. APPLICATIONS

• Residential or commercial AV matrix installations

• Security systems

• Lecture halls and ballrooms

• Retail product showrooms

• Control centers

3. PACKAGE CONTENTS

• 1×UHD+ 4×4 HDMI Matrix with Audio Output

• 1×24V/2.7A DC Power Adapter

• 1×Remote Control (CR-177)

• 1×Rackmount Ears (Set of 2)

• 1×Shockproof Feet (Set of 4)

• 1×Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI source equipment such as media players, video game

consoles or set-top boxes.

• HDMI receiving equipment such as HDTVs, monitors or audio

ampliers.

• The use of Premium High Speed HDMI cables is highly

recommended.

5. FEATURES

• HDMI inputs and outputs support 18Gbps 4K UHD+with HDR signals

• DVI 1.0 compliant with the use of an HDMI to DVI adapter

• HDCP 1.x and 2.2 compliant

• HDMI inputs and outputs support UHD+ resolutions up to

4096×2160@60Hz (4:4:4, 8-bit)

• Supports 16-bit Deep Color up to 1080p60

• Supports pass-through of LPCM (up to 8 channels), bitstream and

HD bitstream audio formats

• High-quality DAC (Digital to Analog audio Conversion) with local

analog stereo audio breakout for each HDMI output (LPCM 2.0

sources only)

• Supports six internal EDIDs, four external EDIDs copied from

connected devices, and four user provided EDIDs

• OSD with user customizable information text

• Controllable via front-panel buttons with LCD, WebGUI, Telnet,

RS-232, and IR remote

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

POWER

IN 1IN 2IN 3IN 4

OUT AOUT BOUT COUT D

ENTER

PRESET

ALLLOCK

MUTE

CONFIRM

CANCEL

UHD+4x4 Matrix with Audio

1 2 3 4 5 7

6 8

9 10

1POWER Button: Press this button to power the unit on (green LED) or

place it into stand-by mode (red LED).

2IR Receiving Window: Accepts IR signals from the included IR

remote for control of this unit only.

3IN 1~4 & OUT A~D Buttons: Press the “OUT” keys (A~D) of the

outputs you wish to route a source to (they will ash to indicate

selection). Next, press the “IN” key of the input (1~4) you wish to

route to the selected outputs. Finally, press “CONFIRM” to conrm

your selection and execute the routing change.

4CONFIRM Button: Press this button to conrm newly made input/

output routing selections.

CANCEL Button: Press this button to cancel newly made input/

output/preset routing selections before they have been conrmed.

5MENU Button: Press to enter the LCD menu, or to back out from

menu items.

ENTER Button: Press to conrm a selection within the LCD menu or

to go deeper into a menu item.

+ (PLUS) & - (MINUS) Buttons: Press to move up and down or adjust

selections within the LCD menu.

6ALL Button: Press this button to select all outputs simultaneously for

routing. Next, press the “IN” key of the input (1~4) you wish to route

to all outputs. Finally, press “CONFIRM” to conrm your selection

and execute the routing change.

7PRESET Button: Press to enter the preset recall menu in the LCD

window. Press the “+/-” buttons followed by the “ENTER” button to

select and activate the preferred preset.

8LOCK Button: Press to lock all button functions on the front panel.

Press and hold for 3 seconds to release the lock function. The LCD

will display “Lock” when the function is active.

9MUTE Button: The “MUTE” button functions as a blank audio/video

source. To use it, follow the standard matrix routing instructions, but

use the “MUTE” button as the input to blank out the selected

outputs. When a “MUTE” input is in use it will show up as “M” within

the routing display.

Note: The associated analog output will not be muted.

10 LCD window: Displays the unit’s menu, settings and information.

6.2 Rear Panel

CONTROL

SERVICE

RS232 IR IN

DC 24V

1234

HDMI IN A B CD

V+

GND

GNDGND

V+

AUDIO / HDMI OUT

1 2 3 4 5 6 7

1HDMI IN 1~4 Ports: Connect to HDMI source equipment such as

media players, game consoles or set-top boxes.

2AUDIO/HDMI OUT A~D Ports: Connect the HDMI outputs to devices

such as HDMI TVs, monitors or ampliers for digital video and audio

output. Connect the audio outputs to powered speakers or an

amplier for analog stereo audio output. The audio from each

stereo analog output will be the same as the HDMI output it is

paired with.

3SERVICE Port: This slot is reserved for rmware update use only.

4CONTROL Port: Connect directly, or through a network switch, to

your PC/laptop to control the unit via Telnet/WebGUI.

5RS232 Port: Connect directly to a PC, laptop or other serial control

device to send RS-232 commands to control the unit.

6IR IN Port: Connect to the provided IR Extender to extend the IR

control range of the unit. Ensure that the remote being used is

within direct line-of-sight of the IR Extender.

7DC 24V Port: Plug the 24V DC power adapter into the unit and

connect it to an AC wall outlet for power.

Tabla de contenidos

Otros manuales de Conmutador de matriz de CYP

CYP

CYP PU-8H8HBTPL Manual de usuario

CYP

CYP OR-HD88HC Manual de usuario

CYP

CYP CPLUS-662CVAL Manual de usuario

CYP

CYP CMSI-8H8HS Manual de usuario

CYP

CYP CPLUS-V4H2HA Manual de usuario

CYP

CYP OR-H44E Manual de usuario

CYP

CYP CPLUS-V4H4H Manual de usuario

CYP

CYP PU-44XL-KIT Manual de usuario

CYP

CYP CDPS-44SM Manual de usuario

CYP

CYP PUV-662-4K22 Manual de usuario

CYP

CYP Elpro Video Labs CDPS-UC4H4HFS Manual de usuario

CYP

CYP CMSDI-164 Manual de usuario

CYP

CYP Elpro Video Labs CDPS-UC4H4HFS Manual de usuario

CYP

CYP CMSI-3232 Manual de usuario

CYP

CYP CPLUS-44PLV Manual de usuario

CYP

CYP CMPRO-UA8H8CVE Manual de usuario

CYP

CYP CMLUX-44S Manual de usuario

CYP

CYP CMPRO-4H4H Manual de usuario

CYP

CYP PU-8H8HBTE Manual de usuario

CYP

CYP OR-DVI88SA Manual de usuario

CYP

CYP CMLUX-44E Manual de usuario

CYP

CYP CMSI-8H8HC Manual de usuario

CYP

CYP PU-16H8HBT Manual de usuario

CYP

CYP OR-HD22S Manual de usuario

Manuales populares de Conmutador de matriz de otras marcas

Broadcast Tools

Broadcast Tools SS 8.2 Manual de usuario

Altimium

Altimium MATF32 Manual de usuario

ALFAtron

ALFAtron ALF-MUK44N Manual de usuario

Monoprice

Monoprice Blackbird 15377 Manual de usuario

Kramer

Kramer XL 3216VS Manual de usuario

PTN

PTN FMX12 Manual de usuario

Kramer

Kramer VP-2x2 Manual de usuario

Kramer

Kramer Sierra Video 6432V5xl Manual de usuario

TESmart

TESmart HMA0402A40 Manual de usuario

Octava

Octava HD4XSTPMX Manual de usuario

Intelix

Intelix FLX-88 Instrucciones de funcionamiento

Kramer

Kramer LASSEN XL 3232S Manual de usuario

Roland

Roland XS-1HD Manual de usuario

Kramer

Kramer VS-66HDCPxl Manual de usuario

Atlona

Atlona AT-HDMI-22M Manual de usuario

Link

Link HD8X8 Manual de usuario

AMX

AMX AVS-OP-2020-117 Instrucciones y recetas

Lindy

Lindy 38042 Manual de usuario