CYP Elpro Video Labs CDPS-UC4H4HFS Manual de usuario

CDPS-UC4H4HFS

4 by 4 HDMI 4Kx2K Matrix with Control System

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE (DD/MM/YY) SUMMARY OF CHANGE

VR0 24/09/15 Preliminary release

VR1 17/02/16 releaseRS-232 Command case-

insensitive

CONTENTS

1. Introduction............................................ 1

2. Applications........................................... 1

3. Package Contents ................................ 1

4. System Requirements............................ 2

5. Features.................................................. 2

6. Operation Controls and Functions....... 3

6.1 Front Panel ........................................3

6.2 Rear Panel.........................................4

6.3 Remote Control................................5

6.4 OLED Menu .......................................6

6.5 IR Cable Pin Assignment................10

6.6 RS-232 Protocol...............................11

6.7 RS-232 and Telnet Commands .....11

6.8 Software Application.....................15

6.9 Telnet Control .................................16

6.10 WebGUI Control ...........................18

6.10.1 Routing Settings...................18

6.10.2 EDID Settings........................19

6.10.3 Macro Settings ....................19

6.10.4 Command Settings.............22

6.10.5 Trigger Settings ....................23

6.10.6 UART Settings .......................23

6.10.7 Network Settings .................24

6.10.8 System Settings....................24

7. Connection Diagram .......................... 25

8. Specications ...................................... 27

8.1 Technical Specications ...............27

8.2 Supported Resolutions...................28

9. Acronyms ............................................. 29

1. INTRODUCTION

This 4K2K 4 by 4 Matrix with fast switch and control system allows 4

HDMI signal sources being displayed in 4 connected HDMI displays in

the way you like, fast switching technology can greatly eliminate the

time required by swapping or turning ON/OFF the connected displays.

Control system features support traditional direct control systems like

IR, Relay and DC trigger and indirect control systems like IR Learning,

RS-232, Telnet/WebGUI controls. Allowing user with PC or APP controls

great exibilities over controlling devices. The operation of the system

can be easily managed through software application on PC/Laptop

or APP on mobile devices and moreover, through on-panel buttons, IR

remote, RS-232, Telnet and Ethernet protocols.

2. APPLICATIONS

• Entertainment Room / Home Theater Display and System Controls

• Show Room / Demo Room Display and System Controls

• Lecture Room/Hall Presentation Display and System Control

• Public Commercial Display and System Control

• Information Board Display and System Control

3. PACKAGE CONTENTS

• 1×4 by 4 HDMI 4K UHD Matrix with Fast Switch

• 1×Remote Control with Battery

• 1×Left & Right Rack Ears

• 1×IR Extender Cable

• 1×5 V/3.6 A Power Adaptor

• 1× Power Cord

• 4×Terminal Blocks

• 1×IR Learner Cable

• 4×3.5 mm to 3.5mm IR Cable

• 1×IR Blaster

• 1×Operation Manual

4. SYSTEM REQUIREMENTS

• Input source equipment such as Blu-ray/DVD/PS3 player or Set-

Top-Box and output HDMI TV/Display and or audio amplier with

connection cables.

• Control system input devices such as security door/windows,

lights, curtain, or devices like players, sound systems, or any other

controllable device with IR/RS-232 or net service link design with PC/

smart phone to send commands to control the whole system.

5. FEATURES

• HDMI with 3D & 4Kx2K supported, HDCP and DVI compliant

• Support 4 HDMI inputs and 4 HDMI outputs

• Supports HDTV resolutions up to 4Kx2K (3840x2160@24/25/30,

3840x2160@50/60_YUV420 & 4096x2160 @24, 4096x2160 @50/60_

YUV420)

• Supports individual EDID or common EDID

• Supports pass through of audio formats: LPCM 2/5.1/7.1CH, Dolby

Digital 2~5.1CH, DTS 2~5.1CH, Dolby Digital Plus, Dolby TrueHD,

Dolby Atmos and DTS-HD Master Audio

• HDCP 1.4 for 4 HDMI inputs and 4 HDMI outputs.

• Input port HDCP support Standard and Apple mode. The Apple

mode selection to guarantees the use of Apple devices

• Compliant with DVI source (Not support Deep color and Color

space YCbCr 422/444)

• Supports IR Learning function: Allows IR signals to be stored in the

system and used for control

• Supports eight Terminal Block inputs with voltage of 5~15V

• Supports 1 IR Learning port, 8 IR outputs, 8 control inputs, 8 Relay

outputs, 2 COM ports, and 4 Ethernet ports

• Supports Baud rates up to 115,200bps

• Supports 10/100Mbps Ethernet network connection

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

POWER

IN 1IN 2IN 3IN 4TAKE

OUT AOUT BOUT COUT DCANCEL

ENTER

PRESET

ALL

MODE

LOCK

POWER

IN 1IN 2IN 3IN 4TAKE

OUT AOUT BOUT COUT DCANCEL

ENTER

PRESET

ALL

MODE

LOCK

4X4 HDMI MATRIX FAST SWITCH

1 2 4 5

8 9 13111 114

710 12

1POWER: Press this button to turn ON the device and the LED will

illuminated.

2IR WINDOW: This IR Receiver receives the remote control signal

from the package include remote control only.

3OUT A~D: Press OUT button along with an IN buttons to select an

input source for an output display. i.e. OUT A→ IN1→TAKE or OUT

A→OUT B→IN4→TAKE.

4IN 1~4: Press IN button to select input from 4 sources.

5TAKE: Press this button to conrm the selection of an IN and an OUT

button. If this button is not pressed the selection will not execute.

6CANCEL: Press this button to cancel the selection.

7MENU: Press to enter into the menu.

8ENTER: Press to conrm selection.

9+/- : Press to select page up and down under menu select.

10 ALL: Press to select an input into all output.

11 PRESET: Press this button, the OLED will show preset selection then

select from IN 1~4 and press “TAKE” to conrm the selection or

press “CANCEL” to cancel the selection.

12 LOCK: Press to lock on all button functions on the front panel. Press

for 3 seconds to relieve the lock function.

13 MODE: Press this button to switch in between the TAKE mode/Real

Time mode. OLED will show current selection on the top right side,

press TAKE to conrm the switch.

14 OLED: Display input and output selection and menu selection.

6.2 Rear Panel

IN OUT

IRL INFRARED OUT COM 1 COM 2 LAN

CONTROLSERVICE RS232 IR IN

DC 5V

HDMI IN HDMI OUT

1234ABCD

1234

12345678

1 2 4 5 7 8

3 6 9 10 11 12 13

1IRL: Connect with IR Receiver included in the package for IR signal

learning. Send the IR signal that is to be learned by press on the

remote control in direct line-of-sight towards the Receiver and use

WebGUI to store and transmit the IR code. Details please refers to

section 6.10.4

Note: Although both IR Extender and IR Learner may look the same

they are however different. IR Extender is designed with more

reddish color whereas IR Learner has a brownish color and a red

dot on the back to be distinguished in between. Please pay extra

attention in connecting and using them.

2INFRARED OUT 1~8: Connect with IR Blaster for IR signal transmitting.

3HDMI IN 1~4: Connect from source equipment such as Blu-ray/

DVD/PS3 players, Set-Top-Box or any HDMI equipped source

device for input signal sending.

4TRIGGER IN 1~8: Connect with event device’s signal lines such as

window security alarm, door switch, and etc… that obtain voltage

from 0~15v For signal trigger sending back to Control System

which works align with Macro setting 1~8 from WebGUI. The upper

row should connect with positive voltage and the lower row are

negative pin, if the lines are miss connected, no signal/action will

be active. For detail connection please referes to below diagram.

5RELAY OUT 1~8: Connect with control device’s power ± line cable

such as DC Power supply to activate the control devices.

6HDMI OUT A~D: Connect to HDMI TV/display or HD Amplier for

output image and or audio display.

7COM 1~2: Connect with devices that obtain RS-232 input for

control purpose. Using TELNET client to send command directly to

control the device, set the connected port to 7501 with COM 1

and 7502 with COM2.

8LAN1~4: Connect with devices that obtain RJ-45 input for control

and data transmitting purpose within the connected LAN system.

9SERVICE: This slot is reserved for rmware update use only.

10 CONTROL: Connect from PC/Laptop with active internet service or

Ethernet switch/Hub for WebGUI control and or data transmitting.

11 RS-232: Connect from PC/Laptop for RS-232 command sending to

control the device.

12 IR IN: Connect the IR Receiver included in the package for IR signal

receive from the included remote control. Ensure that remote

being used is within the direct line-of-sight of the IR Extender.

13 DC 5V: Connect the adaptor with power cord included in the

package and connect to AC wall outlet for power supply.

6.3 Remote Control

1POWER: Press this button to switch the

system ON/OFF.

2OUT A~D: Press these buttons once a

time along with an IN buttons to select

an input source for an output display.

3IN 1~4: Press the IN buttons to select an

input from the 4 input sources.

4ALL: Press this button to select all outputs

to display with an input source.

5TAKE: Press this button to conrm the

selection of an IN and an OUT button. If

this button is not pressed the selection

will not execute.

6CANCEL: Press this button to cancel the

selection.

MODEENTER

OUT A

OUT B

OUT C

OUT D PRESET

LOCK

ALL

TAKE

IN 3

IN 4

IN 1

IN 2

CANCEL

CR-138

Otros manuales para Elpro Video Labs CDPS-UC4H4HFS

Tabla de contenidos

Otros manuales de Conmutador de matriz de CYP

CYP

CYP CPLUS-V4H4HPA Manual de usuario

CYP

CYP PUV-662-4K22 Manual de usuario

CYP

CYP OR-32USBC-4K22 Manual de usuario

CYP

CYP SM-4X2-HDMI-LC Manual de usuario

CYP

CYP CPLUS-32FX Manual de usuario

CYP

CYP CMPRO-UA8H8CVPL Manual de usuario

CYP

CYP OR-YUV44S Manual de usuario

CYP

CYP PU-8H8HBTPL-4K Manual de usuario

CYP

CYP PRO-SDI44 Manual de usuario

CYP

CYP PU-8H8HBTPL Manual de usuario

CYP

CYP OR-HD22S Manual de usuario

CYP

CYP CMPRO-4H4H Manual de usuario

CYP

CYP OR-44-4K22 Manual de usuario

CYP

CYP PUV-44XPL-4K22-KIT Manual de usuario

CYP

CYP OR-HD24S Manual de usuario

CYP

CYP MA-421 Manual de usuario

CYP

CYP CPLUS-1082VA Manual de usuario

CYP

CYP PU-O4H4C Manual de usuario

CYP

CYP CMSI-8H8HS Manual de usuario

CYP

CYP CPLUS-1082CVEA Manual de usuario

CYP

CYP OR-HD42S Manual de usuario

CYP

CYP CDPS-4H4HFS Manual de usuario

CYP

CYP CPLUS-V4H2HP Manual de usuario

CYP

CYP PU-16H8HBT Manual de usuario

Manuales populares de Conmutador de matriz de otras marcas

Broadcast Tools

Broadcast Tools SS 8.2 Manual de usuario

Altimium

Altimium MATF32 Manual de usuario

ALFAtron

ALFAtron ALF-MUK44N Manual de usuario

Monoprice

Monoprice Blackbird 15377 Manual de usuario

Kramer

Kramer XL 3216VS Manual de usuario

PTN

PTN FMX12 Manual de usuario

Kramer

Kramer VP-2x2 Manual de usuario

Kramer

Kramer Sierra Video 6432V5xl Manual de usuario

TESmart

TESmart HMA0402A40 Manual de usuario

Octava

Octava HD4XSTPMX Manual de usuario

Intelix

Intelix FLX-88 Instrucciones de funcionamiento

Kramer

Kramer LASSEN XL 3232S Manual de usuario

Roland

Roland XS-1HD Manual de usuario

Kramer

Kramer VS-66HDCPxl Manual de usuario

Atlona

Atlona AT-HDMI-22M Manual de usuario

Link

Link HD8X8 Manual de usuario

AMX

AMX AVS-OP-2020-117 Instrucciones y recetas

Lindy

Lindy 38042 Manual de usuario