Creality HALOT-MAGE Manual de usuario
3D Printer User Manual
V1.0
HALOT-MAGE
Create reality，achieve dreams
HALOT-MAGE
使用须知
1
2
3
4
5
6
7
8
9
10
12
11
Do not use the printer any way other than described to avoid personal injury or property damage.
Do not expose the printer to violent vibration or any unstable environment, as this may cause poor print quality.
Please use recommended resin in case damage to machine.
Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a well-ventilated, low-dust environment.
Do not use any other power cable except the one supplied. Always use a grounded three-prong power outlet.
Please do not open the plastic cover during usage, otherwise the printing will be interrupted.
Do not wear cotton gloves when operating the printer. Such cloths may become tangled in the printers moving parts leading to burns, possible bodily injury, or printer damage.
Please wait after the print is finished. please wear gloves to take out the print tools.
Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to remove dust, adhered printing plastics or any other material off the frame,
guide rails, or wheels. Use glass cleaner or isopropyl alcohol to clean the print surface.
Children under 10 years should not use the printer without supervision.
Tips Do not plug or unplug the power cord when power on.
Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to
safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Creality will not be responsible for any violators' legal liability under any.
Contents
Equipment Introduction 01-01
Equipment Parameters 02-02
Parts List 03-03
11-13
Print Method
14-14
Clean the Resin Vat
15-16
Wiring Connection
17-17
Troubleshooting
04-10
Use the 3D Printer
0101
1. Equipment Introduction
9
10
1
2
3
4
5
6
9
10
7
8
1
2
3
4
5
6
7
8
2. Equipment parameters
Basic Parameters
0102
3.Parts List
0103
Tool list
8
6
7
0104
4. Interface Information
Tools
Exposure
Note: The current interface is for reference only, due to the continuous
upgrading of functions, the actual to the official website of the latest
firmware Ul as the standard.
Note: If the exposure graph does not match the example
graph, please contact our customer service staff.
15
Please set the exposure time of the test image:
10mm
1.00mm 10.00mm
Z :
① ② ③
④ ⑤
0.10mm
Next
Note: If a correction action cannot be performed, please
contact our customer service staff.
0105
4. Interface Information
System
Calibrate
Note: The current interface is for reference only, due to the continuous
upgrading of functions, the actual to the official website of the latest
firmware Ul as the standard.
004c0026-554d5002-20363643-17f
V4.3.17_LCDMI/3840x2400/F2.18
HALOT-MAGE
4. Interface Information
Refresh file
Turn up
Turn down
Back
Delete
Print/stop
Back
Print
0106
.ctb
①
②
③
②
①
③
④
.ctb
.ctb .ctb
.ctb
Tabla de contenidos
Otros manuales de Impresora 3D de Creality
Creality
Creality HALOT-LITE Manual de usuario
Creality
Creality 3D Print Mill Manual de usuario
Creality
Creality 3D Pad Manual de usuario
Creality
Creality CR-30 Manual de usuario
Creality
Creality K1 Manual de usuario
Creality
Creality Halot-Sky Manual de usuario
Creality
Creality Ender-3 V3 SE Manual de usuario
Creality
Creality CR-10 Smart Manual de usuario
Creality
Creality Falcon2 Manual de usuario
Creality
Creality LD-006 Manual de usuario
Creality
Creality 3dpRINTmILL Manual de usuario
Creality
Creality Ender-5 Manual de usuario
Creality
Creality CR-10 Smart Pro Manual de usuario
Creality
Creality Spider Manual de usuario
Creality
Creality CR-10 S5 Instrucciones de montaje
Creality
Creality HALOT-ONE PRO Manual de usuario
Creality
Creality CR-1000 Pro Manual de usuario
Creality
Creality Sermoon V1 Manual de usuario
Creality
Creality Ender-6 Manual de usuario
Creality
Creality CR-100 Manual
