Creality CR-10 Max Manual de usuario
3D Printer User Manual
V.1.6
CR-10 Max
CREATE REALITY，ACHIEVE DREAMS
CR-10 Max
Thank you for choosing our products.For the best experience,please read the instructions before operating the
Printer. Our teams wiss
always be ready to render you the best services. Please contact us via the phone number or e-mail address
provided at the end when you encounter any problem with the Printer.
For a better experience in using our product, you can also learn how to use the printer in the following ways:
View the accompanied instructions and videos in the storage card.
Visit our official website www.creality.com to find relevant software/hardware information,contact details and
operation and maintenance instructions.
Dear Consumers,
Firmware Upgrade
Please login the official website https://www.creality.com/download, switch the language and select the relevant printer and
model and download the required firmware, you can use it after the installation is finished.
NOTES
1
2
3
4
5
6
7
8
9
10
Do not use the printer any way other than described herein in order to avoid personal injury or property damage.
Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a well-ventilated, low-dust
environment.
Do not expose the printer to violent vibration or any unstable environment, as this may cause poor print quality.
Please use recommended resin to in case damage of machine.
Do not use any other power cable except the one supplied. Always use a grounded three-prong power outlet.
Please do not open the plastic cover during usage, otherwise the printing will be interrupted.
Do not wear cotton gloves when operating the printer. Such cloths may become tangled in the printers moving parts leading to burns,
possible bodily injury, or printer damage.
Please wait a moment after the print is finished. And please wear gloves to take out the print by tools.
Children under 10 years should not use the printer without supervision.
11
12
This machine is equipped with a security protection mechanism. Do not manually move the nozzle and printing platform mechanism
manually while booting up, otherwise the device will automatically power off for safety.
Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used),
abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal
purposes. Creality will not be responsible for any violators' legal liability under any circustance.
Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to remove dust, adhered printing plastics
or any other material off the frame,guide rails, or wheels. Use glass cleaner or isopropyl alcohol to clean the print surface.
Contents
Introduction 01-01
General List 02-03
Device Installtion 04-04
Cable Connection 05-05
Software Installation 06-06
Loading Filament 07-07
V wheel leveling 08-08
Bed Leveling 09-10
Software Installation 11-11
First Printing 12-12
Circuit Wiring 13-13
1.Nozzle kit & auto leveling
2. X-axis limit switch
3. Printing platform
4. Touch screen
5. slot & USB port
6. Power switch
7. Power socket
8. Filament holder
9. Y-axis limit switch
10. Z-axis motor
11. Coupling
12. XL bed-leveling nut
13. Extruder (E) motor
14. Filament detector
15. X-axis motor
Storage card
Parameters
Model CR-10 Max
Molding Size 450 x 450 x 470mm
Molding Tech. FDM
Nozzle Number 1
Slice Thickness 0.1mm-0.4mm
Nozzle
Diameter 0.4mm 0.8mm
Precision ±0.1mm
Fliament φ1.75mm PLA
File Format STL/OBJ/AMF
Working Mode Online or Storage card offline
Slice Software Creality Slicer/Cura/
Repetier-Host/Simplify3D
Power Supply
Spec.
Motherboard 75W, 24V, input: 100-240V AC,
output: 24V；
Hotbed 750W, 24V, input: 100-240V AC, output ：
24V
Machine Power 750W
Hotbed Power 700W
Hotbed Temp. ≤100℃
Nozzle Temp. ≤250℃
Resume Print Yes
Filament
Detector Yes
Dual Z-Axis Yes
Auto Leveing Yes
Language
Selection EN/CN
Operating
System Windows XP/Vista//7/8/10 MAC/Linux
5
6 7 9 10 11 12
13
14
15
8
4
3
2
1
1. Introduction
01
No. Image Name Qty
1Wrench & Screw Driver 1
2Storage Card 1
3Spatula 1
4Pliers 1
5Nozzle Cleaner 1
6Cable Ties 2
No. Image Name Qty
7
Filament Holder 1
8
Filament Holder Tube with
Nuts 1
9
Power Cord 1
10
USB Cable 1
11 M4X20 Hexagon Socket Head
Cap Screws 10
12 T-type Fixed block 2
Gantry FrameBase Frame
Tool List
No. Image Name Qty
13 Spacer 1
14 Feeler Gauge 1
15 Spare Parts 1
16 M5x45 Sems Screw 4
17
18
19
20
Hexagon flat round head
M4X8
M4 T
Blue line claw
BL-Touch probe
-Nut
2
2
2
1
Printing Platform
Tool Box
Filament
Pull Rod
2.General List
02
Tips: the above accessories are for reference only, please refer to the physical accessories!
No. Name Qty
1 Pull rod 4pcs
2L-type pull rod
connecting fittings 2pcs
3 Eye bolt M6 x 35 4pcs
4 M6 nut 4pcs
5 Set screw M6 x 40 2pcs
6M5 x 12 Hexagon socket
button head screw 8pcs
7 M5 T-nut 4pcs
Pull rod details
M5 T-nut
Pull rod joint
Eye bolt M6 x 35
M6 Nut
Pull rod
M6X40
Screw rod
Pull rod
Eye bolt M6 x 35
M6 Nut
3.General List
03
1. Printing Platform Installation 2. Gantry Frame Installation
3. Gantry Frame Fixation
M4X20 Head Cap Screw 4pcs
M5X45 4pcs
Support Rod 4pcs
M6 x 40 Screw rod 2pcs
Eye Bolt M6 x 26 2pcs
M6 Nut 4pcs
M5 x 12 Screw 8pcs
M5 T-Nut 4pcs
M4X8
M4 T-Nut
2pcs
2pcs
M4 x 20 6pcs
T block 2pcs
4. Support Rod
Installation
5. Filament Holder Installation
Hexagon flat round head
4.Device Installtion
04
Z1
Ribbon Cable
Z2
*Plug the power cord into a three-
hole power jack.
5.Cable Connection
05
Current
temperature of
hotbed
Current
temperature of
nozzle
Fan
Manual
Cooling
Automatic
Leveling
Refuel
Motor
Print in f
o
Moving
Language
Select “Print”
Set temperature
of hotbed
Set temperature
of nozzle
Screen Information
Main
Menu Sub Menu Explanation
Print Storage Card
Stop
Pause/Continue
Adjust
Print speed
Nozzle temp.
Hot-bed temp.
Fan
Temperature
up/Stop Continue/Stop
Temp
Automatic PLA \ABS（195°\240°）
Manual
Nozzle preheat
Hot-bed preheat
Cooling Yes\No
Fan On\Off
Setting
Leveling
Z-axis: Z home, +0.1mm, -0.1mm
AUX
leveling
Please click numbers (①~⑤) to
assisted leveling......
AUTO leveling (switch)
Platform measurement (measurement parameters)
Refuel
Withdraw
Feed
Moving X-axis Y-axis Z-axis Z home
Motor off Yes \No
Language English\Chinese
Printer info Device model, firmware version, printing size,
official website
6.Software Installation
06
Otros manuales para CR-10 Max
1
Tabla de contenidos
Otros manuales de Impresora 3D de Creality
Creality
Creality Ender-3 V3 SE Manual de usuario
Creality
Creality CR-10 V3 Manual de usuario
Creality
Creality Halot-Sky Manual de usuario
Creality
Creality HALOT-MAGE Manual de usuario
Creality
Creality CR-10S Pro Manual
Creality
Creality HALOT-ONE PLUS Manual de usuario
Creality
Creality HALOT-LITE Manual de usuario
Creality
Creality Ender-3 V3 KE Manual de usuario
Creality
Creality HALOT-ONE Manual de usuario
Creality
Creality Ender-3 S1 Manual de usuario
Creality
Creality Sermoon V1 Manual de usuario
Creality
Creality 3D Pad Manual de usuario
Creality
Creality Ender-5 Plus Manual de usuario
Creality
Creality CR-10 Series Manual
Creality
Creality LD-002R Manual de usuario
Creality
Creality CR20Pro Manual
Creality
Creality CR20Pro Manual de usuario
Creality
Creality CR-10 SE Manual de usuario
Creality
Creality CR-X Manual de usuario
Creality
Creality CR-100 Manual
