Creality CR-10 Series Manual de usuario
CR-10 Series 3D Printer User Manual
lThe User Manual is for the CR-10 Series of 3D printers. It is also
applicable for the CR-10S/CR-10 S4/CR-10 S5.
lBut CR-10 mini without T-Bracket (Right) & Decoration Strip.
lDue to the different types of devices、hardware and software
upgrade, it is normal if the devices have little different. Please be
subject to the actual products.
lDetailed instructions for using are available on the TF card.
V5.1
Parameters
Basic Parameters
Model
CR-10
CR-10S
CR-10 S4
CR-10 S5
CR-10mini
Printing Size
300*300*400mm
300*300*400mm
400*400*400mm
500*500*500mm
300*220*300mm
Molding Tech.
FDM
Nozzle Number
1
Slice Thickness
0.1mm-0.4mm
Nozzle Diameter
Standard 0.4mm
Precision
±0.1mm
Filament
1.75mm PLA
File Format
STL/OBJ/AMF
Working Mode
Online or TF card offline
Slice Software
Creality Slicer/Cura/Repetier-Host/Simplify3D
Power Supply
Input:AC 115V/230V 50/60Hz
Output:DC 12V
Total Power
270W
270W
250W
270W
270W
Bed Temp.
≤100℃
≤100℃
≤60℃
≤60℃
≤100℃
Nozzle Temp.
≤250℃
Resume Print
NO
Yes
Yes
Yes
Yes
Filament Detector
NO
Yes
Yes
Yes
NO
Dual Z-Axis
NO
Yes
Yes
Yes
NO
language Selection
NO
EN/CN
Operating System
Windows XP/Vista//7/8/10 MAC/Linux
Printing Speed
≤180mm/s，Normal 30-60mm/s
CONTENTS
Dear Customers:
Thank you for choosing our products. For the best experience, please read the
instructions before operating the Printer. Our 3D team will always be ready to give
you the best service. Please contact us via the phone number or e-mail address
provided at the end when you encounter any problem with the Printer.
For a better experience in using our product, you may learn how to use the Printer in
the following ways:
Learning from the instructions and videos that come with your TF card.
Visit our official website at www.creality3d.cn You will find some related software or
hardware information, contact details, operation and maintenance instructions on the
website.
Introduction................................1
General List................................2
Device Installation......................3
Cable Connection......................4
Screen Information....................5
Loading Filament...…............…6
Platform Adjustment.................7
Software Installation.................8
For the First Printing................9
NOTES
1. Do not use the printer in other wrong ways to avoid personal injury or property
damage.
2. Do not place the printer near any heat source or flammable or explosive objects.
We suggest placing it in a well-ventilated, low-dust environment.
3. Do not expose the printer to violent vibration or any unstable environment, as
this may cause poor print quality.
4. Before using experimental or exotic filaments, we suggest using standard
filaments such as ABS or PLA to calibrate and test the machine.
5. Do not use any other power cable except the one supplied. Always use the
three-pin plug .
6. Do not touch the nozzle or printing surface during operation as they may be hot.
Keep hands away from machine while in use to avoid burns or personal injury.
7. Do not wear gloves or loose clothing when operating the printer. Such cloths
may become tangled in the printers moving parts leading to burns, personal
injury, or printer damage.
8. When cleaning debris from the printer hotend, always use the provided tools.
Do not touch the nozzle directly when heated. This can cause personal injury.
9. Clean the printer frequently. Always turn the power off when cleaning, and wipe
with a dry cloth to clean dust, adhered printing plastics or any other material
from the frame, guide rails, or wheels . Use glass cleaner or isopropyl alcohol to
clean the print surface before every print for consistent results.
10. Children under the age of 10, should not use the printer without any supervision.
01/
Introduction
Filament Holder
Control Box
Nozzle Assembly Connection
Platform Connection
Power Cable Connection
Extruder (E) Stepper
X Limit Switch
X Stepper
Z Limit Switch
Z Stepper
Y Limit Switch
Y Stepper
Nozzle Kit
TF Slot and USB Port
Display Screen
Control Knob
Voltage Selection
Platform
Base Frame
Z Gantry Frame
uTool list
02/
General List
Tool Box Control Box
No.
Image
Name
Qty
No.
Image
Name
Qty
No.
Image
Name
Qty
1
Spool & Nuts
1set
7
Power Cable
1
13
Scraper
1
2
Spool Holder
1
8
USB Cable
1
14
Cable Ties
1set
3
TF Card & Card
Reader
1set
9
PTFE Tubing
(spare part)
1
15
Hex keys, Wrench
& Screwdriver
1set
4
T-Bracket (Right)
1
10
Nozzle Cleaner
1
16
Spare Parts
1set
5
T-Bracket
& Z Limit Switch
(Left)
1
11
Filament（200g）
1
17
Decorative Strip
1
6
M5X25 Bolt & Lock
Washer
4 sets
12
Diagonal Pliers
1
18
Thumb Screw
3
Base Frame Gantry Frame
*CR-10 mini without T-Bracket (Right) & Decoration Strip.
03/
Device Installation
Note: Make sure that the nut for
pro file h as b een turne d by 90°
before fastening the
T-shaped fixing block.
M5X25
4pcs
*CR-10 mini without T-Bracket (right).
uInstall the Gantry Frame
uInstall the T-Shaped Fixing Block.
Installation decoration strip into
the notch, starting from one end.
Cut off the excess material with
the diagonal pliers
Attach the Decoration strip to all
parts needing to be decorated.
Attach the Bracket
with two thumb screws.
Attach Spool Holder
with included Nuts
Finished
◆ Install the Rack
◆ Installation decoration strip
*CR-10mini without Decoration Strip.
*The decoration strip is available in various colors. The pictures above are for reference only.
Y Stepper and Limit Switch
Extruder (E) Stepper
X Stepper and Limit Switch
Z Stepper and Limit Switch
Connect the aviation connectors to the
ports
04/
Cable Connection Connect the Stepper Motors according to
the yellow labels on the 6pin (4-wire) side.
Connect the Limit Switches according to the
yellow labels on the 3pin (2-wire) side.
•Select the correct input voltage to match your local
mains (230V or 115V)
•Damage can occur if voltage is set incorrectly.
•Make sure the power cable is connected.
Set Temperature of
the Nozzle
Current Temperature
of the Nozzle
Set Temperature of
the Hot Bed
Current Temperature
of the Hot Bed
Part Cooling Fan
Speed
Current Location of
the nozzle
Print Time
Print Progress
Prompt Message
Print Speed
Device Model
Push：OK/Enter Sub Menu
Turn：Change Option/Value
05/
Screen Information
Screen Information
Menu
Sub Menu
Explanation
Info Screen↑
Main↑
Return
Prepare→
Auto Home
Return to Zero
Move Axis→
Moving X Y Z axis or Extruder by
inputting
Bed Auto Leveling
Disable Steppers
Close motor and move X Y Z axis by
hands
Change Filament
Preheat PLA
Preheat ABS
Cooldown
Close and cooldown the nozzle
Control→
Temperature→
Heat the nozzle and bed or change fan
speed by inputting number
Restore Failsafe
Restore factory setting
Language
English/Chinese
No SD card/
Print from TF
Select the printing model
Init. SD Card
/Change SD
Card
Printing
Tune→
Speed
Change Printing Speed by inputting
Nozzle
Change the temperature by inputting
Bed
Change the temperature by inputting
Fan Speed
Change Fan Speed by inputting
Flow
Change filament flow by inputting
number
Pause Print
Can choose to continue printing
Stop Print
Reprint or choose another model to print
S
Otros manuales para CR-10 Series
5
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Impresora 3D de Creality
Creality
Creality CR-X Manual de usuario
Creality
Creality CR-10 SE Manual de usuario
Creality
Creality Ender 3 Pro Manual de usuario
Creality
Creality K1C Manual de usuario
Creality
Creality CR20Pro Manual de usuario
Creality
Creality CR-Scan Ferret 3D Pro Manual de usuario
Creality
Creality CR-10 SE Manual de usuario
Creality
Creality Ender-6 Manual de usuario
Creality
Creality Ender-3 Manual de usuario
Creality
Creality CR-Laser Falcon Manual de usuario
Creality
Creality Ender-5 Plus Manual de usuario
Creality
Creality Halot-Sky Manual de usuario
Creality
Creality CR-10S Pro Manual de usuario
Creality
Creality Ender-3 Manual
Creality
Creality CR-10 S5 Manual de usuario
Creality
Creality Ender-5 Manual
Creality
Creality CR-100 Manual
Creality
Creality CR-100 Manual
Creality
Creality CR-10 Smart Manual de usuario
Creality
Creality CR-10 Series Manual de usuario
