AWS BT2 series Manual de usuario
American Weigh Scales, Inc.
User Manual
BT2-500 (500 x 0.1g)
BT2-201 (200 x 0.01g)
BT2-Series
BT2-Series Manual
Thank you for purchasing the American Weigh BT2-
Series digital pocket scale. Please read all operating
instructions carefully before use. This electronic scale
is a precision instrument. With normal care and proper
treatment, it will provide years of reliable service.
Never load the scale with more than the maximum
capacity. Overloading the scale will permanently
damage it! Avoid any exposure to extreme heat or
cold. Your scale works better when operated at normal
room temperature. Always allow the scale to acclimate
to normal room temperature for at least one hour
before use.
Give your scale sufcient warm up time. Usually
30-60 seconds before calibration to give the internal
components a chance to stabilize.
Keep your scale in a clean environment. Dust, dirt,
moisture, vibration, air currents and a close distance to
other electronic equipment can all cause an adverse
effect on the reliability and accuracy of your scale.
Handle with care. Gently apply all items to be weighed
onto tray top. Although this scale is designed to be
quite durable, try to avoid rough treatment as this may
permanently damage the internal sensor.
Avoid shaking, dropping or otherwise shocking the
scale. This is a precision instrument and must be
handled with extreme care.
Only operate the scale on a stable, vibration free
surface.
I. OPERATION
Place the scale on a at and level surface. Note: This
scale features a removable protective cover which can
also be used as a weighing tray. To remove the tray,
ip the hinge release switch on the side of the scale.
1. Press the [ I/O ] key.
2. Wait until "0.0g” or "0.00g" is displayed.
3. Place the object(s) to be weighed on the weighing
platform.
4. Using the [ M ] key, you can switch between
weighing units.
II. TARE WEIGHING
Using Tare, you can subtract the weight of a container.
1. Turn the scale on as described above.
2. Place the "tare item" on the platform such as a tray
or container.
3. Press [ T ] and wait until "0.0g" or 0.00g" is
displayed.
4. You can now add items to the tray or container.
III. CALIBRATION
Calibration is NOT required before rst use. Only
calibrate if scale is not weighing properly.
off. Calibration is compete!
BT2-500 - Use a 500g calibration weight
BT2-201 - Use a 200g calibration weight
1. Turn the scale on as described above.
2. Once the scale is at zero, press and hold the
[ M ] key for about 3 seconds. The display will show
“CAL”.
3. Press the [ M ] key again, and the display will show
the required calibration weight (ie 500g or 200g). If you
wish to use a 100g calibration weight instead, press
the T key. The display will change to show 100g.
4. Place the calibration weight on the center of the
platform and wait for the display to show “PASS”.
5. The scale will return to normal weighing mode.
Calibration is complete!
IV. TROUBLESHOOTING
The primary reasons for inaccuracy or malfunction
are low batteries, incorrect calibration, overload or
operating on an unstable surface. Please keep this in
mind and maintain and operate your scale properly.
This scale is a precise instrument and must be
handled with the utmost care and caution.
[Display] Elimination of errors
[88888] Use the scale in a more stable position.
[EEEE] You are overloading the scale. Remove the
excess again after recalibration.
[Out2] The scale is out of calibration. Try
recalibrating (see section III)
Model BT2-500 BT2-201
Capacity 500g / 17.64oz / 16.08ozt /
321.5dwt / 2500ct / 7716gn
200g / 7.05oz / 6.43ozt /
128.6dwt / 1000ct / 3086gn
Resolution 0.1g / 0.01oz / 0.01ozt /
0.1dwt / 0.5ct / 2gn
0.01g /0.001oz / 0.001ozt /
0.01dwt / 0.05ct / 0.2gn
Calibration Weight 500g (not included) or 100g
(selectable)
200g (not included) or 100g
(selectable)
Platform Dimensions
(inches) 2.7 x 2.5”
Scale Dimensions
(inches) 4.9 x 3.0 x 0.75 ”
Power 2 x AAA (included)
Specications
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Escala de AWS
AWS
AWS LB-SERIES Manual de usuario
AWS
AWS HX-502 Manual de usuario
AWS
AWS Blade-100 Manual de usuario
AWS
AWS BS-100 Manual de usuario
AWS
AWS AMW-150DR Manual de usuario
AWS
AWS EDGE-5K Manual de usuario
AWS
AWS EXTEND-5K Manual de usuario
AWS
AWS ACP-200 Manual de usuario
AWS
AWS QUARTZ-5K Manual de usuario
AWS
AWS AMW-Card400 Manual de usuario
AWS
AWS H-110 Manual de usuario
AWS
AWS xp150 Manual de usuario
AWS
AWS AWS-70 Manual de usuario
AWS
AWS V2-600 Manual de usuario
AWS
AWS ECOWEIGH Series Manual de usuario
AWS
AWS mini PRO-50 Manual de usuario
AWS
AWS DigiPEN-500 Manual de usuario
AWS
AWS ONYX-5K Manual de usuario
AWS
AWS GO-110 Manual de usuario
AWS
AWS MB-50 Manual de usuario
