AWS AMW-810 Manual de usuario
American Weigh Scales, Inc.
User Manual
AMW-810
Digital Kitchen Scale
g
kg
TARE
ON/OFF
American Weigh AMW-810
Thank you for purchasing the American Weigh AMW-
810 digital kitchen scale. Please read all operating
instructions carefully before use. This electronic scale
is a precision instrument. With normal care and proper
treatment, it will provide years of reliable service.
Never load the scale with more than the maximum
capacity. Overloading will permanently damage it!
Avoid any exposure to extreme heat or cold. Your
scale works better when operated at normal room
temperature. Always allow the scale to acclimatize to
normal room temperature for at least one hour before
use.
Give your scale sufcient warm up time. Usually
30-60 seconds before calibration to give the internal
components a chance to stabilize.
Keep your scale in a clean environment. Dust, dirt,
moisture, vibration, air currents and a close distance to
other electronic equipment can all cause an adverse
effect on the reliability and accuracy of your scale.
Handle with care. Gently apply all items to be weighed
onto the platform. Although this scale is designed to be
quite durable, try to avoid rough treatment as this may
permanently damage the internal sensor.
Avoid shaking, dropping or otherwise shocking the
scale. This is a precision instrument and must be
handled with extreme care.
Only operate the scale on a stable, vibration free
surface.
I. OPERATION
Always weigh on a at horizontal surface.
1. Before turning the scale on, set the switch on the
underside of the scale to the desired weighing mode
(kg/g or lb/oz).
2. Press [ON/OFF] key.
3. Wait until "0.0” or "0" is displayed.
4. Put the object(s) on the weighing platform / bowl.
II. TARE WEIGHING
When using the bowl to weigh or another
container, it is best to simply turn the scale on with
the container on the platform already. The scale
should go to zero. Otherwise you can use TARE:
1. Turn on scale as described above.
2. Place the "tare item" on the platform.
3. Press [TARE] and wait until "0.00" is displayed.
4. Add the "net-weight-item".
IV. TROUBLESHOOTING
The primary reasons for inaccuracy or malfunction
are low batteries, incorrect calibration, overload or
operating on an unstable surface. Please keep this in
mind and maintain and operate your scale properly.
This scale is a precise instrument and must be
handled with the utmost care and caution.
[Display] Elimination of errors
[LO] Replace the batteries.
[EE] You are overloading the scale. Remove the
excessive load immediately!
Model AMW-810-2K AMW-810-5K
Capacity 2000g / 4.4lb 5000g / 11.0lb
Resolution 1g / 0.1oz 1g / 0.1oz
Display 5 - Digit Backlit LCD
Bowl Dimensions
(inches) 7.75 x 7.75 x 2.25
Scale Dimensions
(inches) 7.0 x 7.0 x 2
Power 4 x AA Batteries (included)
Gross Weight 2 lbs
Specications
Tabla de contenidos
Otros manuales de Escala de AWS
AWS
AWS PN-Series Manual de usuario
AWS
AWS BT2 series Manual de usuario
AWS
AWS CBS-330 Manual de usuario
AWS
AWS AMS-150 Manual de usuario
AWS
AWS BS-100 Manual de usuario
AWS
AWS MSL-180 Manual de usuario
AWS
AWS CAMEO-5K Manual de usuario
AWS
AWS CARD-V2 Manual de usuario
AWS
AWS TB-2610 Manual de usuario
AWS
AWS DigiPEN-500 Manual de usuario
AWS
AWS DIA-20 Manual de usuario
AWS
AWS BT-500 Manual de usuario
AWS
AWS Blade-50 Manual de usuario
AWS
AWS CP5-100 Manual de usuario
AWS
AWS AMW-150DR Manual de usuario
AWS
AWS CP5-100 Manual de usuario
AWS
AWS 330SW Manual de usuario
AWS
AWS PC Series Manual de usuario
AWS
AWS Gemini-20 Manual de usuario
AWS
AWS MDI-20 Manual de usuario
