AWS AMW-DISC-55 Manual de usuario

Este manual sirve para los siguientes modelos

1

Tabla de contenidos

Manuales populares de Escala de otras marcas

Gima

Gima Glass Body Fat Analyzer Manual de lista de piezas

Seca

Seca 374 Manual de usuario

TEC

TEC TEC SL59 SERIES Manual de usuario

Axis

Axis B/E Series Manual de usuario

Alecto

Alecto ACW-40 Manual de usuario

Rice Lake

Rice Lake MSI-4260 IS Manual de usuario

IKA

IKA RCT basic safety control Manual de usuario

ADE

ADE M20011 Manual de usuario

Duronic

Duronic KS3000 Manual de usuario

Digi

Digi SM-720 Manual de usuario

Cardinal

Cardinal CS Series Manual de usuario

Korona

Korona Kastella Manual de usuario

A&D

A&D FC-50Ki Manual de usuario

BDA

BDA CAMARGUE Manual de usuario

Tanita

Tanita HD-357 Manual de usuario

Leifheit

Leifheit 03173 Manual de usuario

Lumme

Lumme LU-1340 Manual de usuario

Fidelity Electronics

Fidelity Electronics G2e Manual de usuario

AMW-DISC

Digital Pocket Scale

User Manual

AMW-DISC-500 (500 x 0.1g)

AMW-DISC-55 (55 x 0.01g)

American Weigh Scales

AMW-DISC User’s Manual

Thank you for purchasing the American Weigh Disc Scale. Please

read all operating instructions carefully before use. This electronic

scale is a precision instrument. With normal care and proper

treatment, it will provide years of reliable service.

• Never load the scale with more than the maximum capacity.

• Avoid any exposure to extreme heat or cold. Your scale will work

better when operated at normal room temperature. Always allow

the scale to acclimate to surrounding temperature for at least one

hour before use.

• Give your scale sufcient warm up time. Usually 30-60 seconds

before calibration to give the internal components a chance to

stabilize.

• Keep your scale in a clean environment. Dust, dirt, moisture,

vibration, air currents, and a close proximity to other electronic

devices can cause an adverse effect on the reliability and accuracy

of your scale.

• Handle with care. Gently apply all items to be weighed onto tray

top. Although this scale is designed to be quite durable, try to avoid

rough treatment which can permanently damage the internal sen-

sor.

• Avoid shaking, dropping, or otherwise shocking the scale. This is

a precision instrument and must be handled with extreme care.

•Only operate the scale on a stable, vibration free surface.

I. Operation

Place the scale on a horizontal at surface.

1. Press ON/OFF key.

2. Wait until [0.0] or [0.00] is displayed.

3. Put the object(s) on the weighing platform.

4. The scale will show when the weight is stable.

5. Use the C/M (Cal/Mode) key to change weighing units.

II. Tare Weighing.

1. Turn on scale as described above.

2. Place the “tare item” on the platform.

3. Press Z/T (Zero/Tare) and wait until [0.0] or [0.00] is displayed.

4. Add the “net-weight-item”.

III. Calibration

This scale has been calibrated before shipment, however accu-

racy may be affected by variations of gravity, shipment, handling,

and changes in temperature. You will need a calibration weight to

calibrate your scale.

Required Weight for Calibration:

AMW-DISC-55 : 50g Calibration Weight (not included)

AMW-DISC-500 : 100g Calibration Weight (not included)

1. Turn OFF the scale.

2. Press and hold the C/M key and then tap the ON/OFF key

once with another nger. Continue holding the C/M key until CAL

is displayed.

3. Release the C/M key and then tap C/M once more. CAL will

ash, followed by the required calibration weight (ie 100g).

4. Insure the scale is stable, and place the required weight on the

center of the platform. Wait until the display shows PASS.

5. You can now remove the weight and turn off the scale.

Calibration is complete!

V. Troubleshooting

The primary reason for innaccuracy or malfunction are low

batteries, incorrect calibration, overload or operating on an

unstable surface. Please keep this in mind and maintain and

operate your scale properly.

Error Code Descriptions:

Error: [LO]

Solution: Replace Batteries

Error: [OUEr]

Solution: The scale is being overloaded. Remove the

excess weight immediately.

Error: [OutZ]

Solution: The scale cannot return to zero. Recalibrate the

scale as described in section III.

Error: [UnST]

Solution: Use the scale on a more stable surface / area.

Error: [FAIL]

Solution: Try calibrating again in a more stable area

Model AMW-DISC-55 AMW-DISC-500

Capacity 55g / 1.940oz / 275ct / 848.8gn 500g / 17.64oz / 16.08ozt /

321.5dwt

Resolution 0.01g / 0.001oz / 0.05ct / 0.1gn 0.1g / 0.005oz / 0.006ozt /

0.1dwt

Weighing Units grams (g), ounces (oz), carats

(ct), grains (gn)

grams (g), ounces (oz), troy

ounces (ozt), pennyweights

(dwt)

Display 5 - Digit Backlit LCD 5 - Digit Backlit LCD

Calibration Weight

(not Included) 50g 100g

Platform Dimensions

(inches) 2.9” Diameter

Scale Dimensions

(inches) 3.75 x 3.6 x 0.75

Power 2 x AAA (included)

Weight 0.26 lb

Specications