Zoom PCI Cable Modem Manual de usuario

Cable Modem

Cable ModemCable Modem

Cable Modem

User’s Guide

for Macintosh®

Notice

NoticeNotice

Notice

The Global Village Communication logo is a registered trademark of Zoom

Telephonics, Inc.

Apple, the Apple logo, AppleTalk, and Macintosh are registered trademarks

of Apple Computer, Inc.

Other trademarks referenced are the property of their respective owners.

Contents

About This Manual ........................................................... 4

Package Contents ............................................................... 4

What You Will Also Need ..................................................... 5

1 Installing Your Cable Modem ....................................... 6

Requesting Cable Modem Service......................................... 6

Configuring Your Macintosh’s Network Settings..................... 9

Connecting Your Modem.................................................... 13

Automated Synchronization ............................................... 15

2 Using Your Cable Modem............................................ 16

Connecting to the Internet ................................................ 16

Ending an Internet Session ................................................ 16

Unplugging the Modem ..................................................... 17

Appendix A Front Panel Information............................. 18

Appendix B Troubleshooting Tips .................................. 19

Appendix C Regulatory Information.............................. 22

4 Global Village Cable Modem User’s Guide

About This Manual

About This ManualAbout This Manual

About This Manual

This User’s Guide provides explanations and step-by-step

instructions for installing and using your new Global Village cable

modem bundle.

Package Contents

Package ContentsPackage Contents

Package Contents

Before you begin, check that you have all the items necessary to

complete installation and connect to the Internet. If you are

missing any items, contact your supplier.

•Zoom® cable modem Model 5011

•10BaseT (Ethernet) cable

•Power adapter

•CD-ROM with complimentary value-added software.

Some models may also include a mounting stand.

About This Manual 5

What You Will Also Need

What You Will Also NeedWhat You Will Also Need

What You Will Also Need

In addition to the items packaged with your modem, you will need

the following items to complete your installation.

•Macintosh with an available Ethernet port and running Mac

OS 7.6.1 or above.

Note: If you have an older Mac, it may have an AAUI-15

Ethernet port rather than a 10BT Ethernet port. If so, you

will need to purchase an AAUI-15-to-10BT adapter.

•Cable modem service provided by your cable company. The

service must be DOCSIS (Data Over Cable Service Interface

Specification) compatible.

•A power outlet.

•A cable TV outlet that has been configured by your cable

company for high-speed broadband access.

•The proper length of 75-ohm coaxial cable to reach between

your cable modem and the cable outlet

Note: Because there is great variety in the way cable is installed,

we do not provide a coaxial cable to connect to your cable

system. If your cable service company does not provide

one, you should purchase a coaxial cable with an RG-59 or

RG-61U rating (75-ohm) and industry-standard F

connectors on both ends. For best performance, do not

use “push-on” F connectors; use only “screw-on” F

connectors.

6 Global Village Cable Modem User’s Guide

Installing Your Cable Modem

Installing Your Cable ModemInstalling Your Cable Modem

Installing Your Cable Modem

This chapter explains how to connect your new cable modem to

your Macintosh and illustrates a typical cable installation in your

home or office.

Note: If your cable company provides you with an installation

procedure, follow it instead of the procedure described in

this chapter.

Installation consists of a few simple steps:

1Requesting cable modem service from your cable

company.

2Configuring your Macintosh's network settings.

3Connecting your modem.

Requesting Cable Modem Service

Requesting Cable Modem ServiceRequesting Cable Modem Service

Requesting Cable Modem Service

Before you install your cable modem, contact your cable company

to arrange for cable modem service and to establish an account.

A cable company representative may take care of the entire

installation for you, or you may get an installation CD from the

company and complete the procedure yourself. If you are doing it

yourself, you will need to provide the following information to the

cable company before you make the connections. We recommend

that you write the information down in the table below for future

reference. All the information you need is printed on the modem’s

bottom label, except for your Macintosh’s Ethernet Adapter MAC

(E-MAC) Address. The E-MAC Address is printed on the

Macintosh’s case, either on the side or bottom. If your Macintosh

is missing its E-MAC Address label, you can locate the number by

following the steps in the next section.

1 Installing Your Cable Modem 7

Information Required for Cable Service

Information Required for Cable ServiceInformation Required for Cable Service

Information Required for Cable Service

Provider

ProviderProvider

Provider

Cable Modem Product Name & Model No.

Cable Modem Product Name & Model No.Cable Modem Product Name & Model No.

Cable Modem Product Name & Model No.

Zoom Model 5011

Zoom Model 5011Zoom Model 5011

Zoom Model 5011

S/N

S/NS/N

S/N

(on modem’s bottom label)

(on modem’s bottom label)(on modem’s bottom label)

(on modem’s bottom label)

____________________

________________________________________

____________________

MIB ID

MIB IDMIB ID

MIB ID

(on modem’s bottom label under large bar code)

(on modem’s bottom label under large bar code)(on modem’s bottom label under large bar code)

(on modem’s bottom label under large bar code)

____________________

________________________________________

____________________

Cable Modem MAC A

Cable Modem MAC ACable Modem MAC A

Cable Modem MAC Ad

ddress

dressdress

dress

(on modem’s bottom label above small bar code)

(on modem’s bottom label above small bar code)(on modem’s bottom label above small bar code)

(on modem’s bottom label above small bar code)

____________________

________________________________________

____________________

Ethernet ID

Ethernet IDEthernet ID

Ethernet ID

(on Macintosh case label)

(on Macintosh case label)(on Macintosh case label)

(on Macintosh case label)

____________________

________________________________________

____________________

If you’ve entered all the above information, go to Configuring

Your Macintosh’s Network Settings on page 9. If the Ethernet

ID label is missing on your Mac, continue below.

Locating Your Ethernet Adapter MAC Address

Locating Your Ethernet Adapter MAC AddressLocating Your Ethernet Adapter MAC Address

Locating Your Ethernet Adapter MAC Address

For Mac OS 7.6.1 - 9.1 and Above but not OS X:

1From the Apple menu, choose Apple System Profiler.

8 Global Village Cable Modem User’s Guide

2In the Apple System Profiler window, click the

Network Overview arrow and then the AppleTalk

arrow. Find the 12-character Hardware Address (E-

MAC Address) and make a note of it in the table above.

3Continue with Configuring Your Macintosh Network

Settings below.

For Mac OS X:

1From the Dock, choose System Preferences and then

Network. The Network pane appears.

2Under the Configure drop-down tab, choose Built-in

Ethernet or Ethernet.

3Make sure that the TCP/IP tab is foremost. Find the 12-

character Hardware Address (E-MAC Address) and note

it in the table above.

1 Installing Your Cable Modem 9

4Click Save and close the Network pane.

5Continue with Configuring Your Macintosh Network

Settings below.

Configuring Your Macintosh’s Network

Configuring Your Macintosh’s NetworkConfiguring Your Macintosh’s Network

Configuring Your Macintosh’s Network

Settings

SettingsSettings

Settings

Depending on your Mac OS, the directions to configure your

Macintosh’s network settings will differ. For OS X, follow the

instructions on page 11. Otherwise, continue directly below.

For Mac OS 7.6.1 - 9.1 and Above but not OS X

For Mac OS 7.6.1 - 9.1 and Above but not OS XFor Mac OS 7.6.1 - 9.1 and Above but not OS X

For Mac OS 7.6.1 - 9.1 and Above but not OS X

1From the Apple menu, choose Control Panels and then

TCP/IP to display the TCP/IP dialog box (you will use this

dialog box in Step 6).

2On the main toolbar, from the File menu, choose

Configurations.

3In the Configurations dialog box, click Duplicate.

4The Duplicate Configuration dialog box appears. Type a

name of your choosing, such as“GV Cable Modem,” and

click OK.

10 Global Village Cable Modem User’s Guide

5The Configurations dialog box appears again. Highlight

your new configuration—in our example, GV Cable

Modem—and click Make Active.

Otros manuales para PCI Cable Modem

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Módem de otras marcas

Davicom

Davicom DM562AP Manual de usuario

EpiValley

EpiValley TATA indicom SXC-1080 Manual de usuario

Zte

Zte WiMAX Manual de usuario

Intelimax

Intelimax MA-2060 Manual de usuario

SMC Networks

SMC Networks D3CM1604V Manual de uso y cuidado

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manual de usuario

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manual de usuario

Samsung

Samsung AceLink SAM-335A Manual de usuario

Enfora

Enfora Enabler-G Guía de configuración rápida

iRZ

iRZ ATM2-232 Manual de usuario

Zhone

Zhone 6310 Manual de usuario

Paradyne

Paradyne Hotwire 7976 Manual de usuario

US Robotics

US Robotics 3453C Manual de usuario

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manual de usuario

Zte

Zte MF823 Manual de usuario

Four-Faith

Four-Faith F1403 Manual de usuario

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manual de usuario

Gemtek

Gemtek WiMAX WIXFBR-103 Manual de usuario