ZKTeco FA2000 Manual de usuario

Product Name and Model Number User Manual

User Manual

FA2000

Date: January 2021

Doc Version: 1.0

English

User Manual

Page | 1

Table of Contents

SAFETY MEASURES ..................................................................................................................................... 3

1INSTRUCTION FOR USE ......................................................................................................................... 6

FINGER POSITIONING..................................................................................................................................................................6

STANDING POSITION, FACIAL EXPRESSION AND STANDING POSTURE....................................................................6

FACE REGISTRATION...................................................................................................................................................................8

VERIFICATION MODE ..................................................................................................................................................................9

1.4.1 FINGERPRINT VERIFICATION ...........................................................................................................................................................9

1.4.2 FACIAL VERIFICATION ....................................................................................................................................................................11

1.4.3 PASSWORD VERIFICATION ...........................................................................................................................................................12

1.4.4 CARD VERIFICATION...................................................................................................................................................................13

1.4.5 COMBINED VERIFICATION ............................................................................................................................................................14

2MAIN MENU ......................................................................................................................................... 15

3USER MANAGEMENT........................................................................................................................... 17

ADDING USERS ..........................................................................................................................................................................17

SEARCH FOR USERS..................................................................................................................................................................21

EDIT USERS..................................................................................................................................................................................21

DELETING USERS .......................................................................................................................................................................22

4USER ROLE ........................................................................................................................................... 23

5COMMUNICATION SETTINGS ............................................................................................................. 25

NETWORK SETTINGS ................................................................................................................................................................25

PC CONNECTION.......................................................................................................................................................................26

CLOUD SERVER SETTING.........................................................................................................................................................27

6SYSTEM SETTINGS............................................................................................................................... 28

DATE AND TIME.........................................................................................................................................................................28

ATTENDANCE SETTING ...........................................................................................................................................................29

FACE PARAMETERS...................................................................................................................................................................30

FINGERPRINT PARAMETERS...................................................................................................................................................32

FACTORY RESET.........................................................................................................................................................................33

USB UPGRADE............................................................................................................................................................................33

7PERSONALIZE SETTINGS..................................................................................................................... 34

INTERFACE SETTINGS...............................................................................................................................................................34

VOICE SETTINGS ........................................................................................................................................................................35

BELL SCHEDULES SETTINGS ..................................................................................................................................................36

PUNCH STATES OPTIONS .......................................................................................................................................................38

SHORTCUT KEYS MAPPINGS .................................................................................................................................................39

8DATA MANAGEMENT.......................................................................................................................... 40

DELETE DATA..............................................................................................................................................................................40

Smart Access Control Terminal

User Manual

Page | 2

9DEPARTMENT MANAGEMENT............................................................................................................ 42

ADD A DEPARTMENT...............................................................................................................................................................42

EDIT A DEPARTMENT ...............................................................................................................................................................44

DELETE A DEPARTMENT .........................................................................................................................................................45

10 SHIFT SET................................................................................................................................. 46

ATTENDANCE RULE..................................................................................................................................................................46

SHIFT SETTING............................................................................................................................................................................47

SCHEDULE ...................................................................................................................................................................................48

11 REPORT .................................................................................................................................... 52

DOWNLOAD ATT. REPORT .....................................................................................................................................................52

DOWNLOAD ATT. SETTING REPORT ...................................................................................................................................55

UPLOAD ATT. SETTING REPORT ...........................................................................................................................................56

SETTING........................................................................................................................................................................................57

12 ACCESS CONTROL................................................................................................................... 58

ACCESS CONTROL OPTIONS..................................................................................................................................................58

13 USB MANAGER ........................................................................................................................ 60

USB DOWNLOAD ......................................................................................................................................................................60

USB UPLOAD ..............................................................................................................................................................................61

DOWNLOAD OPTIONS ............................................................................................................................................................61

14 ATTENDANCE SEARCH............................................................................................................ 62

15 AUTOTEST ............................................................................................................................... 63

16 SYSTEM INFORMATION .......................................................................................................... 64

APPENDIX .................................................................................................................................................. 65

SELF-SERVICE ATTENDANCE TERMINAL FAQS.................................................................................................................................65

Smart Access Control Terminal

User Manual

Page | 3

Safety Measures

The below instructions intend to ensure that the user can use the product correctly to avoid danger or

property loss. The following precautions are to keep users safe and prevent any damage. Please read

carefully before installation.

Noncompliance with instructions could lead to product damage or physical injury (may even cause

death).

1. Read, follow, and retain instructions - All safety and operational instructions must be properly

read and followed before bringing the device into service.

2. Do not ignore warnings - Adhere to all warnings on the unit and in the operating instructions.

3. Accessories - Use only manufacturer-recommended or product-sold accessories. Please do not use

any other components other than manufacturer suggested materials.

4. Precautions for the installation - Do not place this device on an unstable stand or frame. It may fall

and cause serious injury to persons and damage to the device.

5. Service - Do not try to service this unit yourself. Opening or removing covers may expose you to

hazardous voltages or other hazards.

6. Damage requiring service - Disconnect the system from the Mains AC or DC power source and

refer service personnel under the following conditions:

•When cord or connection control is affected,

•When the liquid spilled or an item dropped into the system,

•If exposed to water or due to inclement weather (rain, snow, and more),

•And if the system is not operating normally, under operating instructions.

Just change controls defined in operating instructions. Improper adjustment of the controls may

result in damage and involve a qualified technician to return the device to normal operation.

And do not connect multiple devices to one power adapter as adapter overload can cause over-heat

or fire hazard.

7. Replacement parts - When replacement parts are needed, service technicians must only use

replacement parts provided by the supplier. Unauthorized substitutes can result in a burn, shock, or

other hazards.

8. Safety check - On completion of service or repair work on the unit, ask the service technician to

perform safety checks to ensure proper operation of the device.

9. Power sources - Operate the system only from the label's power source form. If the sort of power

supply to use is unclear, call your dealer.

10. Lightning - Can install external lightning conductors to protect against electrical storms. It stops

power-ups from destroying the system.

Recommended installing the devices in areas with limited access.

Smart Access Control Terminal

User Manual

Page | 4

Electrical Safety

•Before connecting an external cable to the device, complete grounding properly, and set up surge

protection; otherwise, static electricity will damage the mainboard.

•Make sure that the power has been disconnected before you wire, install, or dismantle the device.

•Ensure that the signal connected to the device is a weak-current (switch) signal; otherwise,

components of the device will get damaged.

•Ensure that the standard voltage applicable in your country or region is applied. If you are not sure

about the endorsed standard voltage, please consult your local electric power company. Power

mismatch may cause a short circuit or device damage.

•In the case of power supply damage, return the device to the professional technical personnel or your

dealer for handling.

•To avoid interference, keep the device far from high electromagnetic radiation devices, such as

generators (including electric generators), radios, televisions, (especially CRT) monitors, or speakers.

Operation Safety

•If smoke, odour, or noise rise from the device, turn off the power at once and unplug the power cable,

and then please contact the service centre.

•Transportation and other unpredictable causes may damage the device’s hardware. Check whether

the device has any intense damage before installation.

•If the device has major defects that you cannot solve, contact your dealer as soon as possible.

•Dust, moisture, and abrupt temperature changes can affect the device's service life. You are advised

not to keep the device under such conditions.

•Do not keep the device in a place that vibrates. Handle the device with care. Do not place heavy

objects on top of the device.

•Do not apply rosin, alcohol, benzene, pesticides, and other volatile substances that may damage the

device enclosure. Clean the device accessories with a piece of soft cloth or a small amount of cleaning

agent.

•If you have any technical questions regarding usage, contact certified or experienced technical

personnel.

Smart Access Control Terminal

User Manual

Page | 5

Note

•Make sure whether the positive polarity and negative polarity of the DC 12V power supply is

connected correctly. A reverse connection may damage the device. It is not advisable to connect the

AC 24V power supply to the DC 12V input port.

•Make sure to connect the wires following the positive polarity and negative polarity shown on the

device's nameplate.

•The warranty service does not cover accidental damage, damage caused by mis-operation, and

damage due to independent installation or repair of the product by the user.

Smart Access Control Terminal

User Manual

Page | 6

1Instruction for Use

Finger Positioning

Index, middle, or ring finger are the recommended fingers to use, and avoid using thumb or pinkie as they

are difficult to position correctly on the fingerprint reader and get suitable output.

Note: the recommended method when pressing your fingers onto the fingerprint reader for registration

and identification. Our company will assume no liability for recognition issues that may result from incorrect

usage of the product. We reserve the right of final interpretation and modification concerning this point.

Standing Position, Facial Expression and Standing Posture

The recommended distance

It is recommended to have a 0.3-0.5m

space between the device and the

customer whose height is 1.55m to

1.85m. Users may slightly move forwards

and backward to improve the quality of

facial images captured.

Too

close to the edge

Vertical

Too low

Smart Access Control Terminal

User Manual

Page | 7

Facial expression

Standing posture

Note: During enrolment and verification, please remain natural facial expression and standing posture.

Smart Access Control Terminal

User Manual

Page | 8

Face Registration

Try to keep the face in the centre of the screen during registration. Please face the camera and stay still

during face registration. The screen looks like the image below:

Correct face registration and authentication method

Cautions for registering a face

When registering a face, maintain a 40cm to 80cm space between the device and the face.

Be careful not to change the facial expression. (smiling face, drawn face, wink, etc.)

If you do not follow the instructions on the screen, the face registration may take longer or may

fail.

Do not cover your eyes or eyebrows.

Do not wear hats, masks, sunglasses, or eyeglasses.

Be careful not to display two faces on the screen. It may create confusion and the registration

may fail.

A user wearing glasses should register their face both with and without glasses.

Cautions for authenticating a face

Ensure that the face appears inside the guideline displayed on the screen of the device.

For a person wearing glasses, try authenticating your face with glasses if glasses were used

while registering, or else authenticate without glasses if glasses were not used while

registration. Otherwise, the recognition may fail or can be difficult. Also, if a different pair of

glasses is used than the one used during registration, authentication can also fail. In such a case,

the previously worn glasses can be used for authentication.

If a part of the face is covered by a hat, a mask, an eye patch, or sunglasses, the authentication

may fail. Do not cover the face and allow the device to recognize the eyebrows and other

features of the face.

Smart Access Control Terminal

User Manual

Page | 9

Verification Mode

1.4.1 Fingerprint Verification

1: N fingerprint verification mode

It compares the current fingerprint with all the fingerprint data that is available in the device. The device

enters the fingerprint authentication mode when a user presses his/her finger onto the fingerprint scanner.

Please follow the recommended way to place your finger onto the sensor. For details, please refer to 1.1

Finger Positioning.

The following screen displays on successful and failed verification respectively.

On successful verification On failed verification

1:1 fingerprint verification mode

It compares the current fingerprint with the linked fingerprints to the entered User ID via the virtual

keyboard. Users can try verifying their identity with 1:1 verification mode if they are unable to get access

with the 1:N authentication method.

Smart Access Control Terminal

Tabla de contenidos

Otros manuales de Terminal táctil de ZKTeco

ZKTeco

ZKTeco uFace Plus Series Manual de usuario

ZKTeco

ZKTeco US922 Series Manual de usuario

ZKTeco

ZKTeco Green Label ProBio Manual de usuario

ZKTeco

ZKTeco ProBio(QR) Manual de usuario

ZKTeco

ZKTeco FaceDepot 7B Manual de usuario

ZKTeco

ZKTeco VT07-C22L Manual de usuario

ZKTeco

ZKTeco LPRS2000 Manual de usuario

ZKTeco

ZKTeco G4 Pro Series Manual de usuario

ZKTeco

ZKTeco SpeedFace V4LTI Manual de usuario

ZKTeco

ZKTeco RevFace15 Manual de usuario

ZKTeco

ZKTeco IN710 Manual de usuario

ZKTeco

ZKTeco ZK3530 Manual de usuario

ZKTeco

ZKTeco ZPAD+ Manual de usuario

ZKTeco

ZKTeco PA22 Manual de usuario

ZKTeco

ZKTeco S922 Series Manual de usuario

ZKTeco

ZKTeco iClock 885 Manual de usuario

ZKTeco

ZKTeco LockerPad-7B Manual de usuario

ZKTeco

ZKTeco ZKAIO4000W Manual de usuario

ZKTeco

ZKTeco G5 Manual de usuario

ZKTeco

ZKTeco FaceKiosk-H13 Manual de usuario

ZKTeco

ZKTeco FaceKiosk-H10A Manual de usuario

ZKTeco

ZKTeco Green Label ProCapture-T Manual de usuario

ZKTeco

ZKTeco F Series Manual de usuario

ZKTeco

ZKTeco ZKBio930 Manual de usuario

Manuales populares de Terminal táctil de otras marcas

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manual de usuario

Ingenico

Ingenico AXIUM EX4000 Manual de usuario

Heisei Electronics

Heisei Electronics Q-POS 815 Manual de usuario

Amano

Amano MTX-15 Manual de usuario

FLOWBIRD

FLOWBIRD CWT Compact Touch Manual de usuario

Demco

Demco SP7 Manual de usuario

Lathem

Lathem PC600 Series Manual de usuario

Partner

Partner MF-2352 Manual de usuario

NCR

NCR RealPOS 7460-2 Manual

Simrad

Simrad MS50 Instrucciones de montaje

Unitech

Unitech MR350 MKII Guía de inicio rápido

Jungheinrich

Jungheinrich WMT 210 Manual de usuario

Motorola

Motorola MTP850 Manual de usuario

YASKAWA

YASKAWA 62H-MDC0 Manual de usuario

MVG industries

MVG industries NeptuLink Manual de usuario

Price Industries Limited

Price Industries Limited FDC Manual de instrucciones

Honeywell

Honeywell TemaKey Manual de usuario

EBN

EBN BPC65-B-A16G Manual de usuario