ZKTeco ZK3530 Manual de usuario
USER MANUAL
ZK3530（W）＆ZK3550（W）
Version：1.0 Date: November, 2017
Important Claim
Firstly, thank you for purchasing this hybrid-bio terminal. Before using, please read this manual
carefully to avoid the unnecessary damage! The company reminds you that the proper use will
improve the use affect and authentication speed.
No written consent from our company, any unit, or individual isn’t allowed to excerpt, copy the
content of this manual in part or in full, also spread in any form.
The product described in the manual maybe includes the software which copyrights are shared by
the licensors including our company. Except for the permission of the relevant holder, any person
can’t copy, distribute, revise, modify, extract, decompile, disassemble, decrypt, reverse
engineering, leasing, transfer, sub-license the software, other acts of copyright infringement, but
the limitations applied to the law is excluded.
Copyrights
Ⓒ Copyright 2017 ZKTeco Co. Ltd. All rights reserved.
All rights reserved. Except as specifically permitted herein, no portion of the information in this
document may be reproduced in any form or by any means without the prior written permission
from ZKTeco.
Due to the constant renewal of products, the company cannot undertake the actual product in
consistence with the information in the document, also any dispute caused by the difference between
the actual technical parameters and the information in this document. Please forgive any change
without notice.
Safety Instructions
1. Read these instructions carefully. Keep these instructions for future reference.
2. Please disconnect this equipment from AC outlet before cleaning. Don’t use liquid or sprayed
detergent for cleaning. Use moisture sheet or cloth for cleaning.
3. Please keep this equipment from humidity.
4. Lay this equipment on a reliable surface when install. A drop or fall could cause injury.
5. Make sure power cord such a way that people cannot step on it. Do not place anything over
the power cord.
6. All cautions and warnings on the equipment should be noted.
7. If the equipment is not used for long time, disconnect the equipment from main to avoid being
damaged by transient over voltage.
8. Never pour any liquid into opening; this could cause fire or electrical shock.
9. If one of the following situations arises, get the equipment checked by a service personnel:
10. The power cord or plug is damaged.
11. Liquid has penetrated into the equipment.
12. The equipment has been exposed to moisture.
13. The equipment does not work well or you cannot get it work according to user manual.
14. The equipment has dropped and damaged.
15. Do not leave this equipment in an environment unconditioned, storage temperature below
-20°C or above 60°C, it may damage the equipment.
16. Unplug the power cord when doing any service or adding optional kits.
Lithium Battery Caution:
1. Danger of explosion can happen if the battery is incorrectly replaced. Replace only the
original or equivalent type recommended by the manufacture. Dispose used batteries
according to the manufacturer’s instructions.
2. Do not remove the cover, and ensure no user serviceable components are inside. Take the
unit to the service center for service and repair.
Table of Contents
1. Packing List .............................................................................................................1
1.1. Standard Accessories .........................................................................................................1
1.2 Optional Accessories ...........................................................................................................1
2. System View............................................................................................................3
2.1. Rear View............................................................................................................................3
2.2. Back View............................................................................................................................3
2.3. Specification........................................................................................................................3
2.4. Internal Layout ....................................................................................................................4
3. Pin Definition ...........................................................................................................7
3.1. CPU.....................................................................................................................................7
3.2. pin and jumper setting.........................................................................................................7
4. BIOS Settings ........................................................................................................16
BIOS Setting .....................................................................................................................16
4.1. MAIN MENU......................................................................................................................17
4.2. ADVANCED MENU...........................................................................................................18
4.3. Chipset MENU ..................................................................................................................29
4.4. Security MENU..................................................................................................................33
4.6. Save&Exit MENU..............................................................................................................35
5. LCD Surface Cleaning...........................................................................................36
1
1.Packing List
1.1. Standard Accessories
a.
b.
a. ZK3530&ZK3550
b. ZK3530W&ZK3550W
c. Power Adapter
d. Power coad
c.
d.
1.2 Optional Accessories
a.
b.
c.
2
d.
e
f.
a. Single MSR
b. VFD
c. 2nd Display
d. 1D or 2D Handheld Type Barcode Scanner
e. Thermal Printer
f. Cash Drawer
3
2.System View
2.1. Rear View
2.2. Back View
2.3. Specification
Display & Touch
LCD Display Size
15"/ 15.6"TFT LCD
Max. Resolution
1024x768
Brightness
250 cd/㎡
Support Color
16.2M/ 262K colors
Backlight
LED
☆Please make sure 12V DC plug in the right direction before plugging in DC jack.
4
Touch Type
Standard Projected Capacitive
Main Board
Processor
Intel®Core i3-4010U 1.7GHz(ZK3530)
Intel®Core i5-4200U 2.6GHz(ZK3550)
System Memory
One SO-DIMM socket supports DDR3L
1333 up to 8GB
Storage
HDD
MINI SSD x 1
I/O
USB
X 4 (USB 2.0)
X 2 (USB 3.0)
Powered COM
X 1
Audio Port
x 1 Line-out x1 mic in
Network
LAN
X 1 (RJ45 10/100/1000 Base-T)
Environmental
Temperature
Operation
32° to 104° F (0° to 40° C)
Storage
-4° to 140° F (-20° to 60° C)
Relative Humidity
20% to 80% non-condensing
Power Supply
12V 5A power adapter
OS Support
POS Ready 7 / Win 8.1 Industry / Win 10 IoT
Enterprise
Dimension
296X288X360mm(ZK35)
296X288X382mm(ZK35W)
Compliance
Certifications
CE / FCC
Protection
IP64 on front bezel
2.4. Internal Layout
M/B PCBA
5
In order to prevail in kind, the above picture is for reference only
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Terminal táctil de ZKTeco
ZKTeco
ZKTeco iClock 885 Manual de usuario
ZKTeco
ZKTeco D1s Manual de usuario
ZKTeco
ZKTeco ZKBio910 Manual de usuario
ZKTeco
ZKTeco SpeedFace M4 Manual de usuario
ZKTeco
ZKTeco IM20 Manual de usuario
ZKTeco
ZKTeco TF1700 Manual de usuario
ZKTeco
ZKTeco PA22 Manual de usuario
ZKTeco
ZKTeco ma 300 Manual de usuario
ZKTeco
ZKTeco ZK75 Series Manual de usuario
ZKTeco
ZKTeco LPRS2000 Manual de usuario
ZKTeco
ZKTeco G4 Manual de usuario
ZKTeco
ZKTeco MB20-VL Manual de usuario
ZKTeco
ZKTeco FaceKiosk-H10A Manual de usuario
ZKTeco
ZKTeco EFace10 Manual de usuario
ZKTeco
ZKTeco D3 Series Manual de usuario
ZKTeco
ZKTeco Green Label ProCapture-T Manual de usuario
ZKTeco
ZKTeco MB10-VL Manual de usuario
ZKTeco
ZKTeco U1000F Manual de usuario
ZKTeco
ZKTeco F305 Manual de usuario
ZKTeco
ZKTeco LFace10 Manual de usuario
