Yamaha TOOLS for TYROS Manual de usuario

TOOLS for TYROS INSTALLATION GUIDE

SPECIAL NOTICES

• The software and this Installation Guide are exclusive copyrights of Yamaha Corporation.

• Use of the software and this guide is governed by the SOFTWARE LICENSING AGREEMENT which the purchaser fully agrees to upon breaking

the seal of the software packaging. (Please read carefully the AGREEMENT at the end of this guide before installing the application.)

• Copying of the software or reproduction of this guide in whole or in part by any means is expressly forbidden without the written consent of the

manufacturer.

• Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the

results of the use of this guide and the software.

• Copying of the commercially available music data is strictly prohibited except for your personal use.

• The company names and product names in this Installation Guide are the trademarks or registered trademarks of their respective companies.

• Future upgrades of application and system software and any changes in speciﬁcations and functions will be announced separately.

BESONDERE HINWEISE

• Dieses Programm und diese Installationsanleitung sind im Sinne des Urheberrechts alleiniges Eigentum der Yamaha Corporation.

• Die Benutzung des Programms und dieser Anleitung unterliegt der SOFTWARE-LIZENZVEREINBARUNG, mit der sich der Erwerber durch Öffnen

des Siegels der Programmverpackung uneingeschränkt einverstanden erklärt. (Bitte lesen Sie die VEREINBARUNG am Ende dieser Anleitung vor

Installation der Anwendung sorgfältig durch.)

• Das Kopieren der Software und die Reproduktion dieser Anleitung, in welcher Form auch immer, in Teilen oder als Ganzes, sind nur mit schriftlicher

Genehmigung des Herstellers erlaubt und sonst ausdrücklich verboten.

• Yamaha leistet keinerlei Garantie hinsichtlich der Benutzung des Programms und der zugehörigen Dokumentation und übernimmt keine

Verantwortung für die Ergebnisse der Benutzung dieser Anleitung oder des Programms.

• Das Kopieren im Handel erhältlicher Musikdaten ist nur für Ihren Privatgebrauch zulässig und sonst streng untersagt.

• Die in dieser Installationsanleitung erwähnten Firmen- und Produktnamen sind Warenzeichen bzw. eingetragene Warenzeichen der betreffenden

Firmen.

• Zukünftige Aktualisierungen von Anwendungs- und Systemsoftware sowie jede Anderung der technischen Daten und Funktionen werden separat

bekanntgegeben.

REMARQUES PARTICULIERES

• Les droits d’auteurs (copyright) de ce logiciel et de ce manuel d’installation appartiennent exclusivement à Yamaha Corporation.

• L’usage de ce logiciel et de ce manuel est déﬁni par l’accord de licence auquel l’acheteur déclare souscrire sans réserve lorsqu’il ouvre le sceau de

l’emballage du logiciel. (Veuillez donc lire attentivement l’accord de licence du logiciel situé à la ﬁn de ce manuel avant d’installer le logiciel.)

• Toute copie du logiciel et toute reproduction totale ou partielle de ce manuel, par quel moyen que ce soit, est expressément interdite sans l’autorisation

écrite du fabricant.

• Yamaha n’offre aucune garantie en ce qui concerne l’utilisation du logiciel et de la documentation.Yamaha ne peut en aucun cas être tenu responsable

des dommages éventuels résultant de l’utilisation de ce manuel et de ce logiciel.

• Toute copie de données musicales commercialisées est formellement interdite, sauf pour usage personnel.

• Les noms des ﬁrmes et des produits apparaissant dans ce manuel d’installation sont des marques commerciales ou des marques déposées appartenant

à leurs détenteurs respectifs.

• Les remises à jour du programme et du système ainsi que toute modiﬁcation des caractéristiques et fonctions seront annoncées séparément.

TOOLS for TYROS

Installation Guide/Installationsanleitung/Manuel d’installation

EnglishDeutschFrançais

TOOLS for TYROS INSTALLATION GUIDE

Important Notices about the CD-ROM

Verify that your system meets the operating requirements of

the software (Voice Editor, File Utility, driver, etc.) (Windows

page 3, Macintosh page 7).

Connect the TYROS to your computer.

Refer to the owner’s manual for details on connections.

• Depending on the computer system you are using, some types of

connections may not be possible.

Install the appropriate driver (USB or MIDI) to your com-

puter, and make the necessary settings.

The arrow symbols shown below represent cables.

• Connection using a USB cable

USB connector of the TYROS

↔

USB connector of

the computer ........ Windows: page 4; Macintosh: page 8

• Connection using MIDI cables

MIDI connector of the TYROS

←

MIDI interface device

→

Computer ........Windows: page 6; Macintosh: page 9

Install the software (Voice Editor, etc.).

Refer to page 4 (Windows) or page 8 (Macintosh) for the

installation procedure.

Start up the software.

For subsequent operations, refer to the owner’s manual for each

software program (online help/PDF manual).

• In order to view PDF ﬁles, you will need to install Acrobat Reader in your

computer (Windows: page 4; Macintosh: page 8).

Limitations on the TYROS when using the File Utility

The accessory CD-ROM contains a File Utility program. By using this software, you can transfer ﬁles between the internal memory or

ﬂoppy disk of the TYROS and your computer, and edit them.There are some operating states of the TYROS in which it is not possible to

use the File Utility or in which some File Utility functions are not available.

The following operations cannot be performed on the TYROS.

• Changing the name of a protected song (“Protected” song data

includes commercially available songs that have been copied to the

USER drive.)

• Copying a ﬁle within the same folder

• Transmitting a protected song to the computer

• Transmitting path information to a device

• Accessing the Preset drive.

You cannot use File Utility to perform ﬁle operations of the

TYROS while the TYROS is in one of the following conditions.

• Demo mode

• Factory Reset execution

• When transferring a ﬁle between the TYROS and your computer, you

must set the type of characters on your TYROS to match the language

of the operating system for the computer in which you installed File Util-

ity. If the character code of the TYROS does not match the language of

the computer that is running File Utility, the ﬁle may not be handled cor-

rectly.

• On the TYROS, the File Utility ID is ﬁxed at “1”. If you specify an ID other

than “1,” you will be unable to transmit or receive data. For details on the

File Utility ID, refer to the File Utility PDF manual.

Data Types

This CD-ROM includes the application software, bit-map ﬁles, and demonstration movie ﬁles, etc. See page 3 (Windows) or 7 (Macintosh) for

details.

The applications allow you to edit TYROS voice data and transfer data between your computer and the TYROS.

Media format

The TYROS is compatible with the MS-DOS format.

Operating System (OS)

The applications in this CD-ROM are provided in versions for both Windows and Macintosh operating systems. The installation procedure and

the applications themselves differ depending on the operating system that you are using. Please refer to the appropriate installation instructions.

→

Windows See page 3.

→

Macintosh See page 7.

The following steps are the same for both Windows and Macintosh.

CD-ROM installation procedure

TOOLS for TYROS INSTALLATION GUIDE

For Windows Users

Contents of the CD-ROM

The CD-ROM contains a variety of applications (with installers) and data in the following folders.

*1 Unfortunately, Yamaha makes no guarantee concerning the stability of these programs nor can it offer user support for them.

*2 All the applications listed above are supplied with online/PDF manuals.

* You can start the File Utility or Voice Editor for TYROS software as either a stand-alone software or a plug-in application in the Open Plug-in Technology compatible application.

Refer to the owner’s manual of the client application (sequencer, etc.) for details on using the File Utility or Voice Editor for TYROS as a plug-in software.

Minimum System Requirements

The sytem requirements below may differ slightly depending on the particular operating system.

• Voice Editor for TYROS

Computer

: 166 MHz or higher; Intel

Pentium

/Celeron™ processor

: Windows 98/Me/2000/XP Home Edition/XP Professional

Available Memory

: 32 MB or more

Hard Disk

: 13 MB or more

Display

: 1024 x 768, High Color (16 bit)

• File Utility

Computer

: 166 MHz or higher; Intel

Pentium

/Celeron™ processor

: Windows 98/Me/2000/XP Home Edition/XP Professional

Available Memory

: 32 MB or more

Hard Disk

: 6 MB or more

Display

: 640 x 480, High Color (16 bit)

• File Converter for TYROS

Computer

: 75 MHz or higher; Intel

Pentium

/Celeron™ processor

: Windows 98/Me/2000/XP Home Edition/XP Professional

Available Memory

: 32 MB or more

Hard Disk

: 2 MB or more

Display

: 640 x 480, High Color (16 bit)

• USB MIDI Driver

Computer

: 166 MHz or higher; Intel

Pentium

/Celeron™ processor

: Windows 98/Me/2000/XP Home Edition/XP Professional

Available Memory

: 32 MB or more (64 MB or more is recommended)

Hard Disk

: 2 MB or more

Folder Name Application Name Contents

Acroread_ Acrobat Reader

PDF (Portable Document Format) viewer. Enables you to view each PDF manual for the

applications.

VoiceEditor_ Voice Editor for TYROS

Enables you to edit the TYROS voices on your computer.

FileUtil_ File Utility

Enables you to manage ﬁles in the USER/FD/HD (optional) drive of the TYROS.

FileConv_ File Converter

Enables you to convert data of the PSR-8000 or PSR-9000/9000Pro for use with the

TYROS.

USBdrv_ YAMAHA USB MIDI Driver (for Win 98, Me) Enables communication between the TYROS and your computer via a USB connection

(for the indicated version of Windows).

USBdrv2k_ YAMAHA USB MIDI Driver (for Win 2000, XP)

Folder Name Contents

Data

ScreenSaver Contains screen saver ﬁles for a computer.

Movie Contains demonstration movie ﬁles.

WallPaper Contains Wall paper ﬁles for a computer.

PictureForTyros Contains the main picture or Song Lyrics display background pitcure of the TYROS.

For Windows Users

TOOLS for TYROS INSTALLATION GUIDE

Software Installation

• For details about the application software which has no installation guide

described below, refer to the online manual of each software.

■

Acrobat Reader

In order to view the electronic (PDF) manuals included with each

application, you’ll need to install Acrobat Reader.

• If an older version of Acrobat Reader is installed on your PC, you’ll need to

uninstall it before proceeding.

Double-click on the “Acroread_” folder.

Four different language folders will be displayed.

Select the language you want to use and double-click on its

folder.

The ﬁle “ar***.exe” ﬁle will be displayed. (“***” indicates

the selected language.)

Double-click on “ar***.exe.”

Acrobat Reader Setup Dialog box will be displayed.

Execute the installation by following the on-screen direc-

tions.

After installation is complete, the Acrobat folder appears on your

PC (in Program Files, as the default).

For information on using the Acrobat Reader, refer to the Reader

Guide in the Help menu.

■

USB MIDI Driver

To operate the TYROS from your computer via USB, you’ll need

to install the appropriate driver software.

The USB-MIDI driver is software that transfers MIDI data back

and forth between sequence software and the TYROS via a USB

cable.

→

Windows 98/Me users See below.

→

Windows 2000 users See page 5.

→

Windows XP users See page 6.

• Before you install the USB MIDI driver, you can minimize the possibility of

problems by putting your computer in the following state.

• Close all applications and windows that you are not using.

• Disconnect all cables from the TYROS except for the cable whose

driver you are installing.

Installing the driver on a Windows 98/Me system

Start the computer.

Insert the included CD-ROM into the CD-ROM drive.

Make sure the POWER switch on the TYROS is set to OFF

and use the USB cable to connect the USB terminal of the

computer (or the USB hub) to the USB terminal of the

TYROS. When the TYROS is turned on, the computer auto-

matically displays the “Add New Hardware Wizard.” If the

Add New Hardware Wizard does not appear, click “Add New

Hardware” in the Control Panel.

• In Windows Me, check the radio button to the left of “Automatic

search for a better driver (Recommended)” and click [Next]. The sys-

tem automatically starts searching and installing the driver. Proceed

to step #8. If the system does not detect the driver, select “Specify

the location of the driver (Advanced)” and specify the CD-ROM

drive’s “USBdrv_” to install the driver.

Windows 98

Windows Me

Uninstall (Removing the installed applictaion)

You can remove the installed applictaion software.

Select [START]

→

[Settings]

→

[Control Panel]

→

[Add/

Remove Programs]

→

[Install/Uninstall], then select the

application to be removed and click [Add/Remove...].

Follow the on-screen instructions to uninstall the application.

• The button names or menus may differ depending on the computer

OS.

Computer

Sequence

Software

Driver

USB cable

TYROS

For Windows Users

TOOLS for TYROS INSTALLATION GUIDE

Click [Next].

The window below enables you to select the search method.

Check the radio button to the left of “Search for the best

driver for your device. (Recommended).” Click [Next].

The window that enables you to select a location in which to

install the driver appears.

Check the “CD-ROM drive” box and uncheck all other items.

Click [Next].

• The system may ask you to insert a Windows CD-ROM while it

checks for the driver. Specify the “USBdrv_” directory of the CD-

ROM drive (such as D:\USBdrv_\) and continue the installation.

When the system detects the driver on the CD-ROM and is

ready for installation, it displays the following screen.

Make sure that the “YAMAHA USB MIDI Driver” is listed,

and click [Next]. The system starts the installation.

When the installation is complete, the following screen

appears. Click [Finish].

• Some computers may take about ten seconds to show this screen

after the installation is complete.

Windows 98

Windows Me

The driver has been installed.

Installing the driver on a Windows 2000 system

Start the computer and use the “Administrator” account to log

into Windows 2000.

Select [My Computer]

→

[Control Panel]

→

[System]

→

[Hardware]

→

[Driver Signing]

→

[File Signature Veriﬁca-

tion], and check the radio button to the left of “Ignore -Install

all ﬁles, regardless of ﬁle signature” and click [OK].

Insert the included CD-ROM into the CD-ROM drive.

Make sure the POWER switch on the TYROS is set to OFF

and use the USB cable to connect the USB terminal of the

computer (or the USB hub) to the USB terminal of the

TYROS. When the TYROS is turned on, the computer auto-

matically displays the “Found New Hardware Wizard.” Click

[Next].

Check the radio button to the left of “Search for a suitable

driver for my device. (Recommended).” Click [Next].

The window that appears enables you to select a location in

which to install the driver.

Check the “CD-ROM drives” box and uncheck all other

items. Click [Next].

• The system may ask you to insert a Windows CD-ROM while it

checks for the driver. Specify the “USBdrv2k_” directory of the CD-

ROM drive (such as D:\USBdrv2k_\) and continue the installation.

When the installation is complete, the system displays “Com-

pleting the Found New Hardware Wizard.” Click [Finish].

• Some computers may take about ten seconds to show this screen

after the installation is complete.

Restart the computer.

The driver has been installed.

For Windows Users

TOOLS for TYROS INSTALLATION GUIDE

Installing the driver on a Windows XP system

Start the computer.

Select [Start]

→

[Control Panel].

If the control panel appears as shown below, click “Switch to

Classic View” in the upper left of the window.

All control panels and icons will be displayed.

Go to [System]

→

[Hardware]

→

[Driver Signing]

→

[File

Signature Veriﬁcation], and check the radio button to the left

of “Ignore -Install all ﬁles, regardless of ﬁle signature” and

click [OK].

Click the [OK] button to close System Properties, and then

click “X” in the upper right of the window to close the Con-

trol Panel.

Insert the included CD-ROM into the CD-ROM drive.

Make sure the POWER switch on the TYROS is set to OFF

and use the USB cable to connect the USB terminal of the

computer (or the USB hub) to the USB terminal of the

TYROS. When the TYROS is turned on, the computer auto-

matically displays the “Found New Hardware Wizard.”

Check the radio button to the left of “Search for a suitable

driver for my device. (Recommended).” Click [Next].

The system starts the installation.

When the installation is complete, the system displays “Com-

pleting the Found New Hardware Wizard.” Click [Finish].

• Some computers may take about ten seconds to show this screen

after the installation is complete.

Restart the computer.

The driver has been installed.

■

Voice Editor, File Utility

Once you’ve installed these software programs, you can use your

computer to edit the voices of the TYROS as well as access and

organize data saved to the User/FD/HD drive in the TYROS.

Double-click on the “FileUtil_” or “VoiceEditor_” folder in

the CD-ROM.

The ﬁle “setup.exe” will be displayed.

Double-click on the “setup.exe” ﬁle.

The TYROS Tools setup dialog will be displayed.

Execute the installation by following the on-screen direc-

tions.

For details, refer to the on-line Help or the PDF owner’s manual.

■

File Converter

This software enables you to convert data of the PSR-8000 or PSR-

9000/9000Pro for use with the TYROS.

Double-click on the “FileConv_” folder in the CD-ROM.

“setup.exe” will be displayed.

Double-click on the “setup.exe” ﬁle.

The dialog will be displayed.

Execute the installation by following the on-screen direc-

tions.

For details, refer to the PDF manual.

MIDI port setting

(when starting the

software as a stand-alone application)

Before setting the MIDI port on the Voice Editor or File Utility,

you should set the MIDI port from the MIDI SETUP toolbar.

• When you start the File Utility or Voice Editor as a plug-in application in the

Open Plug-in Technology compatible application, refer to the the PDF man-

ual for the respective software.

1Start the Voice Editor or File Utility.

2Click the MIDI Setup button in the Toolbar called up via step

#1.

3In the MIDI Setup window called up via step #2, click the

[▼] button at the right end of each box and make the port set-

tings as shown.

• In order for MIDI ports to be available here, you’ll need to select the rele-

vant MIDI port within each application software (Voice Editor or File Utility).

This is the port that will be used in the relevant MIDI applications. For

details on setting the MIDI port, refer to the on-line manual of each soft-

ware.

MIDI Setup button

TOOLS for TYROS INSTALLATION GUIDE

For Macintosh Users

Contents of the CD-ROM

The CD-ROM includes three folders: International, Japanese, and Data. Double-click on the appropriate folder to open it. A variety of appli-

cations (with their installers) are included in the International folder, while the Data folder contains various picture and movie ﬁles.

■International folder

*1 Unfortunately, Yamaha makes no guarantee concerning the stability of these programs nor can it offer user support for them.

*2 All the applications listed above are supplied with online/PDF manuals.

■Data folder

Minimum System Requirements

• File Utility

Computer : A Macintosh computer with a USB connector and a PowerPC or later CPU.

OS : Mac OS 8.0 through OS 9.22 (Mac OS X is not supported)

Available Memory : 6 MB or more

Hard Disk : 4 MB or more (except for OMS)

Display : 640 x 480, 256 colors or more

Other : OMS 2.3.3 or later (included in the CD-ROM in the package)

• USB MIDI Driver

Computer : A Macintosh computer with a USB connector and a PowerPC or later CPU.

OS : Mac OS 8.5 through OS 9.22 (Mac OS X is not supported)

Memory : 64 MB or more (128 MB or more is recommended)

• Turn off virtual memory.

Hard disk : 2 MB or more

Other : OMS 2.3.8 or later (included in the CD-ROM in the package)

Folder Name Application Name Contents

Acroread_ Acrobat Reader *1 *2 PDF (Portable Document Format) viewer. Enables you to view each PDF manual for the

applications

OMS_ Open Music System (OMS) *1 *2 Enables you to use several MIDI applications on the Mac OS.

OMS Setup for YAMAHA Contains the OMS Setup ﬁles for the Yamaha TYROS.

USBdrv_ YAMAHA USB MIDI Driver Enables your computer to communicate with the TYROS when your computer and the

TYROS are connected using a USB cable.

FileUtil_ File Utility *2 Enables you to manage ﬁles in the USER/FD/HD (optional) drive of the TYROS.

Folder Name Contents

ScreenSaver Contains screen saver ﬁles for a computer.

Movie Contains demonstration movie ﬁles.

DesktopPicture Contains Wall paper ﬁles for a computer.

For Macintosh Users

8TOOLS for TYROS INSTALLATION GUIDE

Software Installation

■Acrobat Reader

In order to view the electronic (PDF) manuals included with each

application, you’ll need to install Acrobat Reader.

1Double-click on the “Acroread_” folder.

Three different language folders will be displayed: English,

German and French.

2Select the language you want to use and double-click on its

folder.

“Reader Installer” will be displayed.

The Installer name may differ depending on the language you

select.

3Double-click on the “Reader Installer.”

Acrobat Reader Setup Dialog will be displayed.

4Execute the installation by following the directions appearing

on the screen.

After installation is complete, the Acrobat folder appears on

your computer (in Hard Disk, as the default).

For information on using the Acrobat Reader, refer to the

Reader Guide in the Help menu.

■Open Music System (OMS) 2.3.8

OMS allows you to use several MIDI applications on the Mac OS

at the same time.

1Double-click on the “OMS_” folder (English version only).

“Install OMS 2.3.8” will be displayed.

2Double-click on “Install OMS 2.3.8.”

OMS Setup Dialog will be displayed.

3Execute the installation by following the on-screen direc-

tions.

After the installation, select “Restart.”

• After the installation is complete, you may possibly encounter an

error message warning that the installer did not close. In this case,

go to the “File” menu and select “Quit” to close the installer. Then

reboot the computer.

After restarting the Macintosh, you will ﬁnd the “Opcode”/“OMS

Applications” folder on your computer (Hard Disk, as the default).

4Copy the “OMS_2.3_Mac.pdf” in the CD-ROM to the “OMS

Applications” folder (drag-and-drop it to the folder).

Refer to the “OMS_2.3_Mac.pdf” (English version only)

how to use the application.

5Copy the “OMS Setup forYAMAHA” in the CD-ROM to the

“OMS Applications” folder (drag-and-drop it to the folder).

In the “OMS Setup for YAMAHA” folder you will ﬁnd the

OMS Setup ﬁles for the Yamaha tone generators, which can

be used as templates.

■USB MIDI Driver

To operate the TYROS from your computer via USB, you’ll need

to install the appropriate driver software.

The USB-MIDI driver is software that transfers MIDI data back

and forth between sequence software and the TYROS via a USB

cable.

First install OMS before you install the USB-MIDI driver. Also,

after installing the driver, you will need to set up OMS (see page

9).

1Start the computer.

2Insert the included CD-ROM into the CD-ROM drive. The

system displays the CD-ROM icon on the desktop.

3Double-click the CD-ROM icon and double-click the “Install

USB Driver” icon in the “USBdrv_” folder to display the fol-

lowing installation screen.

4The “Install Location” box displays the destination of the

installation. If you wish to change the destination disk or

folder, use the [Switch Disk] button and the pop-up menu to

specify the desired destination.

• This box usually displays the start-up disk as the destination.

5Click the [Install] button. The system displays the following

message: “This installation requires your computer to restart

after installing this software. Click Continue to automatically

quit all other running applications.” Click [Continue].

• To cancel the installation, click [Cancel].

Driver

TYROS

USB cable

Computer

Sequence

Software

OMS

For Macintosh Users

TOOLS for TYROS INSTALLATION GUIDE

6The installation starts. If the driver has already been installed,

the following message appears. To return to step #3, press

[Continue]. To complete the installation, click [Quit].

7When the installation is complete, the system displays the

following message: “Installation was successful. You have

installed software which requires you to restart your com-

puter.” Click [Restart]. The computer automatically restarts.

You can locate the installed ﬁles in the following locations:

• [System Folder] →[Control Panels] →[YAMAHA USB

MIDI Patch]

• [System Folder] →[Extensions] →[USB YAMAHA

MIDI Driver]

• [System Folder] →[OMS Folder] →[YAMAHA USB

MIDI OMS Driver]

■File Utility

Once you’ve installed the File Utility, you can use your computer

to access and organize data saved to the User/FD/HD drive in the

TYROS.

1Double-click on the “FileUtil_” folder in the CD-ROM.

“Install File Utility” ﬁle will be displayed.

2Double-click on the “Install File Utility” ﬁle.

The File Utility installation dialog will be displayed. Execute

the installation by following the on-screen directions.

3After installing, restart the computer.

For details, refer to the on-line Help or the PDF owner’s manual.

Setting up OMS

The OMS studio setup ﬁle for the TYROS is contained in the

included CD-ROM. This studio setup ﬁle is used for setting up

OMS.

• Before performing the following procedure, the OMS and USB MIDI Driver

should be installed (see page 8).

1Use a USB cable to connect the USB terminal of the com-

puter (or the USB hub) to the USB terminal of the TYROS

and turn the TYROS’ power on.

2Start the computer.

3Insert the included CD-ROM into the CD-ROM drive of your

Macintosh computer.

The CD-ROM icon appears on the desktop.

4Double-click on the CD-ROM icon, “OMS_”, and “OMS

Setup for YAMAHA.”

The ﬁle “TYROS-USB” appears. Copy this to the hard disk

on your computer.

5Double-click on the “TYROS-USB” ﬁle to start the OMS

Setup.

6After starting the OMS Setup, the Studio setup ﬁle double-

clicked in step #5 opens.

• If “ ” is not indicated at the right of the setup ﬁle name, select

“Make Current” from the “File” menu and execute the save opera-

tion.

The OMS studio setup has been completed.

• After the OMS studio setup above has been completed, your computer will

recognize only the TYROS as a MIDI instrument. If you use another MIDI

instrument in addition to the TYROS or you add a second TYROS to the

existing system, you should create an original Studio Setup ﬁle. For details,

refer to the on-line manual supplied with the OMS.

Indicates this setup is available

For Macintosh Users

10 TOOLS for TYROS INSTALLATION GUIDE

Depending on the Macintosh and operating system version

that you are using, the included studio setup ﬁle for the

TYROS still may not work even after you have performed the

above steps. (MIDI transmission and reception will not be

possible even if the setup is valid.)

In this case, use the following procedure to re-create the setup

ﬁle.

1Connect the TYROS and Macintosh via USB cable, and

turn on the power of the TYROS.

2Start up OMS Setup, and from the “File” menu, choose

“New setup.”

3The OMS driver search dialog box will appear.

Uncheck both [Modem] and [Printer] if you are using a

USB connection.

4Click the [Find] button to search for the device.

When a device has been found, the OMS Driver Setting

dialog box will display the following.

For a USB connection: USB-MIDI 1

• If the device was found correctly, click the [OK]

button to proceed.

• If the device was not found, re-check that the cable

connections are correct, and repeat the procedure

from step #1.

5Make sure that the port is shown below the device that

was found. (This will be a name such as USB-MIDI.)

Check the check box for the port, and then click the

[OK] button.

6A dialog box will appear, allowing you to name the ﬁle

that will be saved. Input the desired ﬁlename, and click

[Save].

This completes the OMS setup.

7From the “Studio” menu, choose “Test,” and click the

port icon.

If a channel sounds on the TYROS, the system is oper-

ating correctly.

For details on using OMS, refer to “OMS_2.3_Mac.pdf,”

included with OMS.

Tabla de contenidos

Idiomas:

Otros manuales de Software de Yamaha

Yamaha

Yamaha EZ-220 Page Turner Manual de usuario

Yamaha

Yamaha Clavinova CVP-210 Manual de usuario

Yamaha

Yamaha M7CL StageMix V1.5 Manual de usuario

Yamaha

Yamaha Studio Manager v.2 Manual de usuario

Yamaha

Yamaha Sound Editor ver. 2.10 Manual de usuario

Yamaha

Yamaha M7CL StageMix V1.5 Manual de usuario

Yamaha

Yamaha mLAN Driver Manual de usuario

Yamaha

Yamaha Studio Manager v.2 Manual de usuario

Yamaha

Yamaha Clavinova CVP-309 Manual de usuario

Yamaha

Yamaha MOTIF XS6 Manual de usuario

Yamaha

Yamaha CVP-403PE Manual de usuario

Yamaha

Yamaha Faders Manual de usuario

Yamaha

Yamaha QS1-MC Manual de usuario

Yamaha

Yamaha mLAN Patchbay Manual de usuario

Yamaha

Yamaha mLAN Driver Manual de usuario

Yamaha

Yamaha ASIO DirectKS Manual de usuario

Yamaha

Yamaha A4000 Manual de usuario

Yamaha

Yamaha HUB Manual de usuario

Yamaha

Yamaha DME-N Manual de usuario

Yamaha

Yamaha PM5D Manual de usuario

Yamaha

Yamaha VL Manual de usuario

Yamaha

Yamaha PM1D Manager V2 Manual de usuario

Yamaha

Yamaha mLAN Driver Manual de usuario

Yamaha

Yamaha SPX2000 Editor Manual de usuario

Manuales populares de Software de otras marcas

COMPRO

COMPRO COMPROFM Manual de usuario

Muratec

Muratec OFFICEBRIDGE ONLINE Manual de usuario

Oracle

Oracle Contact Center Anywhere 8.1 Manual de usuario

Adobe

Adobe 65007312 - Photoshop Lightroom Manual

Avaya

Avaya NULL One-X for RIM Blackberry Manual de usuario

HP ProLiant BL420c Manual de usuario

PS Audio

PS Audio PowerPlay Manual del propietario

Brady

Brady LOCKOUT PRO 3.0 Manual de servicio

Avaya

Avaya Interaction Center Manual de usuario

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manual

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manual de usuario

Oracle

Oracle Application 9i Manual de usuario

Acer

Acer RDM Manual de usuario

Canon

Canon Vixia HF21 Manual de usuario

Canon

Canon ZR950 Manual de usuario

Samsung

Samsung Auto Backup Manual de usuario

Polycom

Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manual de usuario