Yamaha IMX644 Manager Manual de usuario

IMX644 Manager Owner’s Manual

• The software and this manual are the exclusive copyrights of Yamaha Corporation.

• Please read carefully the Software Licensing Agreement at the end of this manual before installing the software.

•Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written con-

sent of the manufacturer.

•Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsi-

ble for the results of the use of this manual and the software.

•Future upgrades of application and system software and any changes in speciﬁcations and functions will be announced at the following

URL.

• The illustrations and screens as shown in this manual are for instructional purposes only, and may appear somewhat different from

those on your computer.

•Windows is a registered trademark of Microsoft

Corporation in the United States and other countries.

• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

•Speciﬁcations and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or

modify products or speciﬁcations at any time without prior notice. Since speciﬁcations, equipment or options may not be the same in

every locale, please check with your Yamaha dealer.

SPECIAL NOTICES

http://www.yamahaproaudio.com/

Precautions when using the [USB] connector

When connecting the computer to the [USB] connector, make sure to observe the following points. Failing to do so risks freezing the

computer and corrupting or losing the data. If the computer or the device freezes, restart the application software or the computer OS,

or turn the power to the device off then on again.

CAUTION

• Use an AB type USB cable of less than about 3 meters.

• Before connecting the computer to the [USB] connector, exit from any power-saving mode of the computer (such as suspend, sleep,

standby).

• Before turning on the power to the device, connect the computer to the [USB] connector.

•Execute the following before turning the power to the device on/off or plugging/unplugging the USB cable to/from the [USB] con-

nector.

- Make sure that data is not being transmitted from the device.

- Quit any open application software on the computer.

• While the computer is connected to the device, you should wait for six seconds or more between these operations: (1) when turning

the power of the device off then on again, or (2) when alternately connecting/disconnecting the USB cable.

Owner’s Manual

IMX644 Manager Owner’s Manual

What is IMX644 Manager?...................................................................................... 3

System requirements .............................................................................................3

Installation procedure ............................................................................................4

Installing IMX644 Manager................................................................................4

Installing the IMX644 USB Driver (Windows 7 users) ....................................5

Installing the IMX644 USB Driver (Windows Vista users)..............................8

Installing the IMX644 USB Driver (Windows XP users) ...............................12

Uninstallation procedure .....................................................................................13

Windows 7 users .............................................................................................13

Windows Vista users.......................................................................................13

Windows XP users ..........................................................................................14

Starting IMX644 Manager .....................................................................................15

Basic operation in the Parameter Edit screen ................................................... 17

BLOCK screen ......................................................................................................19

INPUT screen ........................................................................................................23

MATRIX screen .....................................................................................................24

OUTPUT screen ....................................................................................................25

OUTPUT EQ screen .............................................................................................. 26

MISC screen ..........................................................................................................28

GPI screen.............................................................................................................30

MEMORY screen ................................................................................................... 31

Troubleshooting ...................................................................................................32

SOFTWARE LICENSE AGREEMENT................................................................... 34

Table of contents

IMX644 Manager Owner’s Manual

IMX644 Manager is application software that lets you make detailed parameter settings for the IMX644. IMX644 Manager has the

following functionality.

• Edit the IMX644’s parameters

When connected online with the IMX644, you can perform detailed editing of the IMX644’s parameters in real-time. Edited set-

tings can be saved as a file.

You can use IMX644 Manager to edit offline even when not connected to the IMX644 online. However, some parameters are saved

only in the IMX644, so operation when editing offline will differ in some cases from operation when editing online (e.g., channel

levels and GPI settings). As far as possible, you should use this software when connected online with the IMX644.

• Send files of settings to the IMX644

Files of settings that you saved using IMX644 Manager can be sent and loaded into the IMX644.

NOTE

• Communication between the IMX644 and IMX644 Manager requires that they be connected via a USB cable or RS-232C cable. In order to

connect via USB, you’ll also need to install the IMX644 USB Driver.

In order to use IMX644 Manager, your computer must meet the following requirements.

NOTE

• Depending on the operating system you’re using, your computer may require specifications that exceed these requirements.

• The following system requirements are for IMX644 Manager version 1.02 For the latest information on the most recent version and system

requirements, refer to the following URL.

Windows 7/Vista

Windows XP Professional SP2 or later / XP Home Edition SP2 or later

What is IMX644 Manager?

System requirements

http://www.yamahaproaudio.com/

Windows 7 (64 or 32 bit), Vista (64 or 32 bit), XP Professional (SP2 or later), XP Home Edition (SP2 or

later)

Hard Disk

Free disk space of 50 MB or more

Display

1024 x 768, high color (16 bit) or higher

Other

Mouse / Keyboard / USB connector or RS-232C connector

CPU

Intel Pentium/Celeron 1.4 GHz or higher

Available Memory

1 GB or more (2 GB or more for Windows 7 64-bit version)

CPU

Intel Pentium III 400 MHz or higher

Available Memory

128 MB or more

IMX644 Manager Owner’s Manual

This section explains how to install IMX644 Manager and the IMX644 USB Driver.

The IMX644 USB Driver installation procedure will depend on the OS you are using.

Windows 7 users .........................page 5

Windows Vista users ...................page 8

Windows XP users ......................page 12

Installing IMX644 Manager

Disconnect all USB devices (other than keyboard and mouse) from your computer, including the IMX644.

Log on to Windows using an account that has administrative privileges.

You must also close all application software and windows you’re not using.

Double-click “IMX644Manager.msi,” located where you extracted the compressed file that you down-

loaded.

The setup dialog box for Yamaha IMX644 Manager will appear.

Perform the installation as directed by the on-screen instructions.

After installation the IMX644 folder will initially be in the computer’s “C:\Program Files

(x86)\YAMAHA” folder if you’re running the 64-bit version of the OS, or in the “C:\Program

Files\YAMAHA” folder if you’re running the 32-bit version. A shortcut icon will be created on your

desktop.

If you intend to connect IMX644 Manager to the IMX644 via USB, you’ll need to install the IMX644 Manager USB Driver

next.

NOTE

• If you’re using Windows 7/Vista and the “User Account Control” dialog box appears, click [Allow].

• If IMX644 Manager is already installed, a software maintenance screen will appear during installation of IMX644 Manager. Remove

the software by following the on-screen directions. After you’ve removed the software, perform the installation from step 3.

Installation procedure

If this software is already installed in your computer

You’ll need to uninstall any older versions of IMX644 Manager before installing the latest version.

For details on how to uninstall, refer to page 13.

IMX644 Manager Owner’s Manual

Installing the IMX644 USB Driver (Windows 7 users)

Turn the IMX644 power switch OFF.

Turn the IMX644 ON while holding the front-panel MEMORY [D] button, then connect the IMX644 to the

computer’s USB connector.

Select [Start]

→

[Control Panel]

→

[Hardware and Sound]

→

[Device Manager].

The “Device Manager” window will appear.

Right click “YAMAHA IMX644” in “Other Devices”, and select “Update Driver Software”.

The “Update Driver Software” window will appear.

IMX644 Manager Owner’s Manual

Click [Browse my computer for driver software].

Click [Browse] and select “C:\Program Files (x86)\YAMAHA\IMX644\usbimx644” if you’re running the 64-

bit version of the OS, or “C:\Program Files\YAMAHA\IMX644\usbimx644” if you’re running the 32-bit ver-

sion. Click [Next].

The “Windows Security” window will appear.

Click [Install this driver software anyway].

The installation process will begin.

IMX644 Manager Owner’s Manual

When the installation process has finished, “Windows has successfully updated your driver software”

will appear.

Click [Close] to close the window, and check that “Yamaha IMX644 USB Serial Converter” has been added to the “Univer-

sal Serial Bus controllers” item in the Device Manager window.

Right click “USB Serial port” in “Other Devices”, and select “Update Driver Software”.

The “Update Driver Software” window will appear.

Repeat steps 5 through 7, above.

“Windows has successfully updated your driver software” will appear.

Click [Close] to close the window, and check that “Yamaha IMX644 USB Serial Port (COMn*)” has been added to the

“Ports (COM & LPT)” item in the Device Manager window.

* The port number “n” will depend on the device.

Turn the IMX644 ON while holding the front-panel MEMORY [D] button.

The IMX644 will start up in IMX644 Manager mode.

Launch the IMX644 Manager either by selecting [Start]

→

[All Programs]

→

[YAMAHA IMX644 Manager]

→

[IMX644 Manager], or by double-clicking the shortcut icon on the desktop.

If the installation has been successful the IMX644 Manager [Status] indicator will light green and the

device will be online. If the device does not appear online, refer top the “Troubleshooting” section on

page 32.

IMX644 Manager Owner’s Manual

Installing the IMX644 USB Driver (Windows Vista users)

Power-off the IMX644.

Use a USB cable to connect the IMX644 to your computer.

The “Found New Hardware” screen will appear.

NOTE

• Make the USB connection directly to your computer without going through a USB hub.

Click [Locate and Install driver software (recommended)].

NOTE

• If the “User Account Control” dialog box appears, click [Allow] or [Continue].

Click [Don’t search online].

Click [I don’t have the disc. Show me other options.].

Click [Browse my computer for driver software (advanced)].

IMX644 Manager Owner’s Manual

Click the [Browse] button, and inside the IMX644 folder, select the folder that contains the driver

(“C:\Program Files\YAMAHA\IMX644\Usbimx644” by default), and click [Next].

NOTE

• If a Windows security dialog box appears, click [Install this driver software anyway].

When the installation is completed, a message indicating this will appear.

Click the [Close] button to close the screen.

IMX644 Manager Owner’s Manual

The “Found New Hardware” window will appear.

Click [Don’t search online].

NOTE

• Depending on your computer’s Windows Update driver settings, the above window may not appear. If the window does not appear, go

on to the next step.

Click [I don’t have the disk. Show me other options.].

Click [Browse my computer for driver software (advanced)].

NOTE

• If the Windows Security dialog box appears, click [Install this driver software anyway].

Otros manuales para IMX644 Manager

Tabla de contenidos

Otros manuales de Software de Yamaha

Yamaha

Yamaha DSP5D Editor Manual de usuario

Yamaha

Yamaha MagicStomp Manual de usuario

Yamaha

Yamaha AE041 Manual de usuario

Yamaha

Yamaha A3000 Manual de usuario

Yamaha

Yamaha QS1-MC Manual de usuario

Yamaha

Yamaha 03DVEK Manual de usuario

Yamaha

Yamaha HUB Manual de usuario

Yamaha

Yamaha Sound Editor ver. 2.10 Manual de usuario

Yamaha

Yamaha VE Manual de usuario

Yamaha

Yamaha CL1 Manual de usuario

Yamaha

Yamaha DM 1000 Manual de usuario

Yamaha

Yamaha CobraNet MY16-CII Manual de usuario

Yamaha

Yamaha CS6R Manual de usuario

Yamaha

Yamaha A4000 Manual de usuario

Yamaha

Yamaha Add-On Effects Manual de usuario

Yamaha

Yamaha DME64N - Pro Audio Manual de usuario

Yamaha

Yamaha FIRESTATION MLAN PATCHBAY Manual de usuario

Yamaha

Yamaha Synth Manual de usuario

Yamaha

Yamaha File Utility Manual de usuario

Yamaha

Yamaha M7CL-32 Manual de usuario

Yamaha

Yamaha Add-On Effects Manual de usuario

Yamaha

Yamaha S90 Manual de usuario

Yamaha

Yamaha Extension Manual de usuario

Yamaha

Yamaha LS9-16 Manual de usuario

Manuales populares de Software de otras marcas

COMPRO

COMPRO COMPROFM Manual de usuario

Muratec

Muratec OFFICEBRIDGE ONLINE Manual de usuario

Oracle

Oracle Contact Center Anywhere 8.1 Manual de usuario

Adobe

Adobe 65007312 - Photoshop Lightroom Manual

Avaya

Avaya NULL One-X for RIM Blackberry Manual de usuario

HP ProLiant BL420c Manual de usuario

PS Audio

PS Audio PowerPlay Manual del propietario

Brady

Brady LOCKOUT PRO 3.0 Manual de servicio

Avaya

Avaya Interaction Center Manual de usuario

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manual

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manual de usuario

Oracle

Oracle Application 9i Manual de usuario

Acer

Acer RDM Manual de usuario

Canon

Canon Vixia HF21 Manual de usuario

Canon

Canon ZR950 Manual de usuario

Samsung

Samsung Auto Backup Manual de usuario

Polycom

Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manual de usuario