Symantec BACKUP EXEC 11D Manual de usuario

September 2006

Symantec Backup ExecTM 11d for

Windows Servers

Quick Installation Guide

2Quick Installation Guide

Symantec Legal Notice

Symantec logo are trademarks or registered trademarks of Symantec Corporation or its affiliates in

the U.S. and other countries. Other names may be trademarks of their respective owners.

The product described in this document is distributed under licenses restricting its use, copying,

distribution, and decompilation/reverse engineering. No part of this document may be reproduced in

any form by any means without prior written authorization of Symantec Corporation and its

licensors, if any.

THE DOCUMENTATION IS PROVIDED “AS IS” AND ALL EXPRESS OR IMPLIED CONDITIONS,

REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE

DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY

INVALID. SYMANTEC CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING PERFORMANCE, OR USE

OF THIS DOCUMENTATION. THE INFORMATION CONTAINED IN THIS DOCUMENTATION IS

SUBJECT TO CHANGE WITHOUT NOTICE.

The Licensed Software and Documentation are deemed to be “commercial computer software” and

“commercial computer software documentation” as defined in FAR Sections 12.212 and DFARS

Section 227.7202.

Symantec Corporation

20330 Stevens Creek Boulevard

Cupertino, CA 95014

http://www.symantec.com

Quick Installation Guide - Table of Contents

System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Before you install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

About the Backup Exec services account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Installing Backup Exec to a local computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Installing Backup Exec options to the local computer . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Upgrading from previous versions of Backup Exec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Before starting Backup Exec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Starting Backup Exec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4Quick Installation Guide

English

Symantec Backup ExecTM

11d for Windows Servers

Quick Installation Guide

This guide provides instructions to help you install Backup Exec 11d for Windows

Servers and its options to local servers by using the Backup Exec installation program.

For information about any of the following installation scenarios, see the chapter titled

"Installing Backup Exec" in the Symantec Backup Exec for Windows Servers Administrator’s

Guide:

■Install Backup Exec from the command line.

■Install Backup Exec media servers to remote computers.

■Install Backup Exec remote agents and options on remote servers.

■Install the Backup Exec Remote Administrator.

The Administrator’s Guide provides complete instructions to help you set up and use

Backup Exec. The Administrator’s Guide is available in PDF format on the installation

CD and in online help format from the Help menu in Backup Exec.

System requirements

6Quick Installation Guide

System requirements

The following are the minimum system requirements for running this version of Backup

Exec:

Minimum system requirements

Item Description

Operating system ◆Microsoft Windows 2000 Server (with Service Pack 4 and Update Rollup

1 for Service Pack 4)

◆Microsoft Windows Server 2003

◆Microsoft Windows Server 2003 x64 Editions

◆Microsoft Windows Server 2003 R2 Editions

◆Microsoft Windows Storage Server 2003 (with Service Pack 1)

◆Microsoft Windows Storage Server 2005

◆Microsoft Windows XP (with Service Pack 2)

◆Microsoft Windows XP Professional x64 Edition

◆Microsoft Windows Small Business Server 2000 (with Service Pack 4)

◆Microsoft Windows Small Business Server 2003 (with Service Pack 1)

◆Microsoft Windows Small Business Server 2005

Additional

application support

◆Microsoft Windows Microsoft Management (MOM) 2005

◆Microsoft Windows Data Protection Manager

Internet browser Internet Explorer 6.0 or later. Service Pack 1 is required for SQL Server

2005 Express.

Processor Intel Pentium, Xeon, AMD, or compatible.

Memory Required: 256 MB RAM

Recommended: 512 MB RAM (or more for better performance)

Note RAM requirements may vary depending on the operations

performed, the options installed, and the specific computer

configuration.

For the Central Admin Server Option: 512 MB RAM required, 1 GB

recommended.

Virtual Memory Recommendations: 20 MB above the Windows

recommended size for total paging file size (total for all disk volumes).

Symantec Backup ExecTM 11d for Windows Servers Quick Installation Guide

Before you install

English

Before you install

Before you install Backup Exec, you should do the following tasks:

■Run the Backup Exec Environment Check on the computer on which you want to

install Backup Exec. The Environment Check analyzes the computer to make sure

that the installation process can complete. If Backup Exec finds configuration issues

that can be fixed during the installation, or that may prevent the installation,

warnings appear. Although the Environment Check runs automatically during

installation, you may want to run it manually before you install Backup Exec or

before you back up data with Backup Exec.

Disk space 696 MB (Typical installation)

805 MB (Includes all options)

Note Disk space requirements may vary depending on the operations

performed, the options installed, and the specific system

configuration. Backup Exec databases and catalogs will require

additional space.

Other hardware ◆Network interface card or a virtual network adapter card.

◆CD-ROM drive.

◆(Recommended) A mouse.

◆(Optional for pager notification) Modem supported by Microsoft

Windows.

◆(Optional for printer notification) Printer supported by Microsoft

Windows.

Storage hardware Backup Exec requires at least one storage media drive or single-drive

robotic library and the appropriate controller card. You can also use

removable storage devices and non-removable hard drives. Refer to the

Backup Exec hardware compatibility list for a complete list of supported

devices:

http://support.veritas.com/menu_ddProduct_BEWNT_view_CL.htm

Support for a single robotic library drive is available when you purchase

Backup Exec. To enable support for additional robotic library drives, you

must purchase the Backup Exec Library Expansion Option.

Minimum system requirements

Item (continued) Description

About the Backup Exec services account

8Quick Installation Guide

■Install the storage device hardware (controller, drives, robotic libraries) on the

media server. Refer to the documentation that is included with your storage device

hardware for installation instructions. Use the appropriate Windows hardware

setup functions to configure your controller and storage devices. Refer to your

Microsoft Windows documentation for more information.

■Check your Windows security settings to make sure they work properly with the

Backup Exec service account.

■If the drive on which you want to install Backup Exec is encrypted or compressed,

and you would like to use a default SQL Express database, verify that an

unencrypted and uncompressed drive is available for SQL Express installation.

■Exit all other programs.

About the Backup Exec services account

All Backup Exec services on the media server run in the context of a user account

configured for the Backup Exec system services. You can create this account during the

Backup Exec installation, or you can use an existing user account. To create a service

account for Backup Exec during installation, enter the name and password of an

Administrator account for the Backup Exec services to use.

If this computer is in a domain, enter a Domain Administrators account, or an

equivalent account that is part of the Domain Admins group. In the Domain list, select

or enter the Domain name.

If this computer is in a workgroup, enter an Administrators account, or an equivalent

account that is part of the Administrators group on the computer. In the Domain list,

select or enter the computer name.

The account that you designate for Backup Exec services, whether it is a new account or

an existing user account, is assigned the following rights:

■Authenticate as any user and gain access to resources under any user identity.

■Create a token object, which can then be used to access any local resources.

■Log on as a service.

■Administrative rights (provides complete and unrestricted rights to the computer).

■Backup operator rights (provides rights to restore files and directories).

■Manage auditing and security log.

Due to security implementations in Microsoft Small Business Server, the service

account must be Administrator.

Symantec Backup ExecTM 11d for Windows Servers Quick Installation Guide

Installing Backup Exec to a local computer

English

On a computer that runs Windows Server 2003 or Windows XP, you cannot install

Backup Exec with a service account that has a blank password. If you attempt to do so,

the following error message appears when Backup Exec services are created:

The given password is not correct for account [server]\[username].

You can configure Windows to allow for blank passwords. For more information, see

your Windows documentation.

Installing Backup Exec to a local computer

The Backup Exec CD includes an installation program that guides you through the

installation process.

If you are upgrading from a previous version of Backup Exec, see “Upgrading from

previous versions of Backup Exec” on page 14.

If you want to install Backup Exec to a non-English version of Windows, you must

download the SQL Express SP1 setup file from the Microsoft Web site before you install

Backup Exec if all of the following are true:

■You want to use a local Backup Exec SQL Express instance.

■You have non-English SQL Server instances on the computer on which you want to

install Backup Exec.

In addition, if you upgrade from a previous version of Backup Exec that uses a

non-English version of Windows, you must download the SQL Express SP1 setup file

from the Microsoft Web site.

Note If you install Backup Exec through Terminal Services and the installation media is

on a shared drive (CD-ROM or network share), you must install it using a UNC

path. Installation via mapped drives is not supported in this situation.

To install Backup Exec to a local computer

1. From the installation CD browser, click Installation, and then click Start the

Backup Exec Installation.

1. From the installation CD browser, select the option to install Symantec Backup Exec.

2. On the Welcome panel, click Next.

3. Select I accept the terms of the license agreement, and then click Next.

4. Check Local Install, and then click Install Backup Exec software and options.

Installing Backup Exec to a local computer

10 Quick Installation Guide

5. Click Next

For first-time installations and for upgrades, the Backup Exec Environment Check

runs automatically after you click Next.

6. Review the results of the Environment Check.

7. Do one of the following:

■If the Environment Check does not reveal any issues that may prevent a

successful installation of Backup Exec, click Next.

■If the Environment Check reveals any issues that may prevent a successful

installation of Backup Exec, click Cancel to exit the wizard. Correct the issues

before you attempt to install again.

8. Do one of the following:

9. Select one of the following methods to enter license keys:.

10. Click Next.

If you have serial

numbers for Backup Exec

and its options

◆Go to https://licensing.symantec.com to activate the product.

After you activate the product, Symantec sends license keys to

you. License keys are required to install Backup Exec and its

options. You can access the Web site from any computer that

has Internet access.

◆When you receive your license keys, go to step 9

If you have license keys

for Backup Exec and its

options

Go to step 9.

To manually enter

license keys

◆Type a license key into the license key field.

◆Click Add.

◆Repeat for each license key for each option or agent that you want

to add.

To import license

keys from a file

◆Click Import.

◆Select the besernum.xml file.

To install an

evaluation version

◆Leave the license key field blank.

◆Proceed to step 9.

Tabla de contenidos

Otros manuales de Software de Symantec

Symantec

Symantec 10099585 - 10PK NORTON ANTISPAM 2004 Manual de usuario

Symantec

Symantec ALTIRIS SECURITY EXPRESSIONS Manual de usuario

Symantec

Symantec WINDOWS INSTALLER EDITOR 8.0 Manual de servicio

Symantec

Symantec SERVICEDESK 7.0 MR2 - CUSTOMIZATION GUIDE... Manual de usuario

Symantec

Symantec ALTIRIS BARCODE SOLUTION 7.0 - V1.0 Manual de usuario

Symantec

Symantec WISE MOBILE DEVICE PACKAGE EDITOR 7.0 SP2 - REFERENCE FOR WISE INSTALLATION STUDIO... Manual de servicio

Symantec

Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 -... Manual de usuario

Symantec

Symantec BRIGHTMAIL - SYM ANTISPAM AND Manual de usuario

Symantec

Symantec 360 - V4.0 Manual de usuario

Symantec

Symantec 14125628 - Norton Internet Security 2009 Manual de usuario

Symantec

Symantec ANTIVIRUS - V 11.0 FOR MAC Manual de usuario

Symantec

Symantec 10514879 - Norton Confidential Manual de usuario

Symantec

Symantec ALTIRIS INVENTORY 7.0 SP2 - FOR NETWORK DEVICES... Manual de usuario

Symantec

Symantec 10551441 - AntiVirus Corporate Edition Manual de usuario

Symantec

Symantec MONITOR PACKS FOR SERVERS 7.0 - SP2 S Manual de instrucciones

Symantec

Symantec WISE VIRTUAL PACKAGE EDITOR 8.0 - REFERENCE FOR WISE PACKAGE STUDIO... Manual de servicio

Symantec

Symantec ALTIRIS DEPLOYMENT SOLUTION Manual de usuario

Symantec

Symantec PCANYWHERE - PACKAGER IMPLEMENTATION GUIDE... Manual de usuario

Symantec

Symantec Veritas Storage Foundation HP-UX Manual de usuario

Symantec

Symantec ANTIVIRUS 5.2 - FOR NETWORK ATTACHED STORAGE Manual de usuario

Symantec

Symantec SOFTWARE MANAGER 8.0 - REFERENCE FOR WISE PACKAGE STUDIO... Manual de servicio

Symantec

Symantec ALTIRIS ASSET MANAGEMENT SUITE 7.0 - V1.0 Manual de usuario

Symantec

Symantec WISESCRIPT EDITOR 8.0 - REFERENCE FOR WISE PACKAGE STUDIO... Manual de servicio

Symantec

Symantec ALTIRIS DEPLOYMENT SOLUTION 7.1 - FOR DELL SERVERS... Manual de usuario

Manuales populares de Software de otras marcas

COMPRO

COMPRO COMPROFM Manual de usuario

Muratec

Muratec OFFICEBRIDGE ONLINE Manual de usuario

Oracle

Oracle Contact Center Anywhere 8.1 Manual de usuario

Adobe

Adobe 65007312 - Photoshop Lightroom Manual

Avaya

Avaya NULL One-X for RIM Blackberry Manual de usuario

HP ProLiant BL420c Manual de usuario

PS Audio

PS Audio PowerPlay Manual del propietario

Brady

Brady LOCKOUT PRO 3.0 Manual de servicio

Avaya

Avaya Interaction Center Manual de usuario

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manual

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manual de usuario

Oracle

Oracle Application 9i Manual de usuario

Acer

Acer RDM Manual de usuario

Canon

Canon Vixia HF21 Manual de usuario

Canon

Canon ZR950 Manual de usuario

Samsung

Samsung Auto Backup Manual de usuario

Polycom

Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manual de usuario