StarTech.com VS440HDMI Manual de usuario

Manual Revision: 04/06/2020

User Manual

For the latest information and specications visit

www.startech.com/VS440HDMI

4x4 HDMI Matrix Video Switch Splitter | RS232

Actual product may vary from photos

SKU#: VS440HDMI

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Compliance Statements

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment o and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

• Reorientorrelocatethereceivingantenna

• Increasetheseparationbetweentheequipmentandreceiver

• Connecttheequipmentintoanoutletonacircuitdi󱐯erentfromthatto

whichthereceiverisconnected

• Consultthedealeroranexperiencedradio/TVtechnicianforhelp

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du

Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other

Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and

other protected names and/or symbols of third-party companies not related in

any way to StarTech.com. Where they occur these references are for illustrative

purposes only and do not represent an endorsement of a product or service

by StarTech.com, or an endorsement of the product(s) to which this manual

applies by the third-party company in question. Regardless of any direct

acknowledgement elsewhere in the body of this document, StarTech.com

hereby acknowledges that all trademarks, registered trademarks, service marks,

and other protected names and/or symbols contained in this manual and

related documents are the property of their respective holders.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Safety Statements

Safety Measures

• Wiringterminationsshouldnotbemadewiththeproductand/or

electriclinesunderpower.

• Cables(includingpowerandchargingcables)shouldbeplacedand

routedtoavoidcreatingelectric,trippingorsafetyhazards.

Mesures de sécurité

• Lesterminaisonsdecâblâgenedoiventpasêtree󱐯ectuéeslorsquele

produitet/oulescâblesélectriquessontsoustension.

• Lescâbles(ycomprislescâblesd’alimentationetdechargement)

doiventêtreplacésetacheminésdefaçonàévitertoutrisque

électrique,dechuteoudesécurité

安全対策

• 電源が入っている状態の製品または電線の終端処理を行わないでくださ

い。

• ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引き回し

を行い、電気障害やつまづきの危険性など、安全上のリスクを回避するよう

にしてください。

Misure di sicurezza

• Iterminialideilielettricinondevonoessererealizzateconilprodotto

e/olelineeelettrichesottotensione.

• Icavi(inclusiicavidialimentazioneediricarica)devonoessere

posizionatiestesiinmododaevitarepericolidiinciampo,rischidi

scosseelettricheopericoliperlasicurezza.

Säkerhetsåtgärder

• Monteringavkabelavslutningarfårintegörasnärproduktenoch/eller

elledningarnaärströmförda.

• Kablar(inklusiveelkablarochladdningskablar)skadrasochplaceraspå

såsättattriskförsnubblingsolyckorochandraolyckorkanundvikas.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Table of Contents

Compliance Statements........................................................................1

Safety Statements..................................................................................2

Product Diagram....................................................................................4

Front View.................................................................................................................................................... 4

Rear View...................................................................................................................................................... 5

Product Information..............................................................................6

Package Contents ..................................................................................................................................... 6

Requirements ............................................................................................................................................. 6

Installation ..............................................................................................7

Hardware Installation .............................................................................................................................. 7

Connecting the IR Extender (Optional)............................................................................................. 9

Connecting an RS232 Control (Optional)......................................................................................... 9

Function Buttons....................................................................................10

Software Installation .............................................................................11

AV Matrix Software ................................................................................................................................... 11

Mapping the Output Ports to an Input Port.................................................................................... 13

Disconnecting/Disabling Video Output............................................................................................ 15

Saving/Loading Stored Proles............................................................................................................ 15

Troubleshooting.....................................................................................16

Specications..........................................................................................17

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Product Diagram

Front View

1Output Port Buttons

2Input Port Buttons

3IR Receiver

4Function Buttons

5LCD Display

43 5

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Rear View

1RS232 DB9 Port

2DC Power Port

3IR Extender Port

4HDMI Input Ports

5HDMI Output Ports

345

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Product Information

Package Contents

• VS440HDMI Video Switch x 1

• IR Extender Module x 1

• Remote Control x 1

• Rack Mounting Brackets x 2

• Screws for Rack Mount Brackets x 6

• DB9 RS232 Cable x 1

• Universal Power Adapter x 1

• Software Installation CD x 1

• AAA Batteries x 2

Requirements

• HDMI Video Source Device(s) (e.g. computer, game console,

PVR/DVR, etc)

• HDMI Display Device(s) (e.g. monitor, projector, HDTV, etc)

System

• Microsoft®Windows®2000/XP/Vista/7 (32/64-bit), 32MB RAM,

10MB storage space, CD-ROM drive, RS232 serial port

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Installation

Hardware Installation

1. Make sure that all connected Devices are powered o

before beginning installation.

2. Connect an HDMI Cable(s) to the HDMI Output Port(s) on

the Matrix Switch and the other end to an HDMI port on an

HDMI Display Device(s).

Connecting Display Devices

3. Connect an HDMI Cable(s) to the HDMI Input Port(s) on

the Matrix Switch and the other end to an HDMI port on the

HDMI Video Source Device(s).

Connecting Video Source Devices

4. Select the appropriate regional Power Cord and connect it

to the Universal Power Adapter.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

5. Connect the Universal Power Adapter to the DC Power

Port on the Matrix Switch and the other end to an AC

Electrical Outlet.

6. Turn on the connected HDMI Display Device(s) and then

the HDMI Video Source Device(s).

7. The LCD Display on the Matrix Switch will activate,

displaying the current status and Input-to-Output display

relationships.

LED Display

Note: The top row of the LCD Display lists the HDMI Dis-

play Devices connectd to an Output Port (4). The bottom

row lists the HDMI Video Source Devices connected to the

Input Ports (2). If a 0 appears this means that there is no

HDMI Video Source Device connected to that Input Port.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Connecting the IR Extender (Optional)

• Connect the IR Extender to the IR Extended Port on the

Matrix Switch. Position the IR Extender so that the Remote

Control has an unobstructed view/path to the IR Extender.

Connecting the IR Extender

Connecting an RS232 Control (Optional)

• Connect a DB9 RS232 Cable to the RS232 DB9 Port on the

Matrix Switch and the other end to the RS232 port on the

Host Computer.

Connecting a RS232 Control

Otros manuales para VS440HDMI

Tabla de contenidos

Otros manuales de Convertidor de medios de StarTech.com

StarTech.com

StarTech.com MMC110MMST Manual de usuario

StarTech.com

StarTech.com ET10GSFP Manual de usuario

StarTech.com

StarTech.com VGA2VID Manual de usuario

StarTech.com

StarTech.com IPUSB2VGAUE Manual del sistema

StarTech.com

StarTech.com ET90110ST Manual del sistema

StarTech.com

StarTech.com HD2VID2 Manual de usuario

StarTech.com

StarTech.com ST122HD202 Manual de usuario

StarTech.com

StarTech.com PATA2SATA2 Manual de usuario

StarTech.com

StarTech.com ICUSBAUDIO Manual del sistema

StarTech.com

StarTech.com DVI2HDMI Manual de usuario

StarTech.com

StarTech.com PATA2SATA3 Manual de usuario

StarTech.com

StarTech.com IPUSB2VGA Manual de usuario

StarTech.com

StarTech.com DVI2VGACON Manual de usuario

StarTech.com

StarTech.com MCMGBSC15 Manual del sistema

StarTech.com

StarTech.com USB32DVCAPRO Manual de usuario

StarTech.com

StarTech.com VGA2TV2WAY2 Manual de usuario

StarTech.com

StarTech.com ET91000LC Manual de usuario

StarTech.com

StarTech.com ET91000SC Manual de usuario

StarTech.com

StarTech.com VGA2NTSC Manual de usuario

StarTech.com

StarTech.com ET91000SM40 Manual de usuario

StarTech.com

StarTech.com VGA2DVII Manual de usuario

StarTech.com

StarTech.com MCMGBSC15 Manual de usuario

StarTech.com

StarTech.com DVI2VGA Manual de usuario

StarTech.com

StarTech.com MCM1110GSC Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario