Socket D820 Manual de usuario
D800, D820, D840, D860
DS®800 S
UG
2
Package Contents 3
Optional Charging Accessories 3
Product Information 4
Charge the Battery 5
Scanning Barcodes 6
Bluetooth Connection Modes 7-8
How to setup our scnner
Download our Companion App 9
Cn’t use Compnon App
How to setup our scnner n Bsc Mode
Basic Mode 10
How to setup our scnner n Applcton Mode
Apple® 11
Android 12
Windows 13
Bluetooth Unpairing 14
Factory Reset 15
Restore Method 16
Status Indicators 17-19
Quick Programming 20-25
Helpful Resources 26
Battery Warning, Safety, Compliance, Warranty 27-38
Table of Contents
3
Insert Card
Thn ou for choosn Socet Moble Let’s et strted
©2023 Socket Mobile, Inc. All rights reserved. Socket®, the Socket Mobile logo, SocketScan®, DuraSled®, Socket Mobile DuraCase™
Battery Friendly® are registered trademarks or trademarks of Socket Mobile, Inc. Microsoft® is a registered trademark of
Microsoft Corporation in the United States and other countries. Apple®, iPad®, iPad Air®, iPad mini®, iPad Pro®, iPhone®, iPod touch®,
Objective-C®, Swift™, and Xcode® are registered trademarks of Apple, Inc., registered in the U.S. and other countries. The Bluetooth®
Technology word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Socket
Mobile, Inc. is under license. Other trademarks and trade names are those of their respective owners.
Optional Charging Accessories
Charging Dock 6 Multi-Bay ChargerCharging
Adapter
DuraScan®
800 Series
Charging Dock
(Available with bundle)
Package Contents
4
Socket Mobile’s barcodes scanners can be wiped clean with a cloth dampened
with isopropyl alcohol or water. Or, the barcode scanners can be wiped clean
with a Sani-Cloth.
Warning: DO NOT IMMERSE IN WATER (scanner’s mechanics could be
damaged)
DO NOT USE BLEACH FOR CLEANING (scanner’s material property may be
affected)
*Also used to display the on-screen keyboard in Basic Mode (iOS only).
Charging Pins
Wrist Strap Hook
Wrist Strap
Hook
Bluetooth indicator LED
Battery indicator LED
Power button*
Scan button
Product Information
5
1. Insert scanner into Charging Dock, 6 Bay Charger or Charging Adapter.
• Bundles available for Charging Dock and 6 Bay Charger.
2. Insert USB or plug into wall port.
3. The scanner will beep twice indicating adequate power is being supplied to
the unit.
Side LED status
• Red = Charging
• Green = Fully charged
Note: The scanner comes with a pre-installed rechargeable Lithium Ion battery,
the initial full charging of the battery can take up to 8 hours.
Power On
Press and hold down the small power button on the side until the scanner
beeps twice (low-high tone).
Charge the Battery
8 Hours
Charging Dock 6 Bay Charger
Due to varying countries’ outlets,
the 6 Bay Charger power cords
differ per region.
Charging
Adapter
6
After connecting the scanner to your device, open an application.
Place the cursor where you want to enter the scanned data.
1. Hold the scanner a few inches from the barcode.
2. Aim, press and hold the scan button.
By default, the scanner will beep, vibrate, and the side LED will flash green to
confirm successful scan.
DurScn D800
~4” to 8”
scnnn
dstnce
DurScn D840
~6” to 12”
scnnn
dstnce
Scanning Barcodes
DurScn D860
~2” to 30”
scnnn
dstnce
7
Bluetooth Connection Modes
Connect your barcode reader using one of the following Bluetooth
connection modes:
Bluetooth Connecton Profles
Bluetooth Mode Description
OS Applcton Mode*
(Defult)
Use this mode with an
Apple app designed for
Socket Mobile barcode
readers.
1. Use with an App developed for iOS devices
2. Software installation is required
3. Mode to use for iOS applications that support
Socket Mobile readers
Androd/Wndows
Applcton Mode
Use this mode with an
Android app designed for
Socket Mobile barcode
readers.
1. Software installation is required
2. More efficient and reliable data
communications for barcodes containing lots
of data
3. Mode recommended for applications
supporting Socket Mobile readers
Bsc ebord Mode
Configures the barcode
reader to Human
Interface Device (HID).
• NO software installation needed
• Connects to most devices
• Good for barcodes containing small amounts
of data
• Barcode reader interacts with host device like
a keyboard
*B defult, the brcode reder s set to OS Applcton Mode
8
Bluetooth Connection Modes
Opertn Sstem Connecton Optons
Operating
Systems
(OS)
Devices Bluetooth HID
Support
Bluetooth SPP
Support
Bluetooth
Apple
Serial
Specific
(MFi Mode)
Android Android 4.0.3 &
later Yes Yes N/A
Apple iOS iPod, iPhone, &
iPad Yes N/A Yes
Windows
PC
Windows 8,
10, 11 Yes Yes N/A
Mac OS
Mac OS X 10.4
to 10.X
Mac Books,
Mac Mini, &
iMac
Yes N/A N/A
Note: To switch from one mode to the other you must remove the pairing
information from both devices - host computer and the scanner. (see unpairing
procedure on page 15)
The scanner will unpair and automatically power off. The next time you power
on the scanner, it will be discoverable.
Select the appropriate mode and pair with the second host device.
9
Companion App
Wtch How To vdeos https://vimeo.com/504468784
Socket Mobile Companion helps you configure Socket
Mobile barcode readers from the convenience of a mobile
device.
Register a device and extend your warranty by 90 days
• Add multiple devices
• Purchase accessories (limited availability)
• Browse app partners
The Companion app enables you to configure the reader into the faster and
more accurate App Mode, so it can be controlled by other apps, such as
Shopify and Square, to name a couple of the 1000+ apps available.
The Socket Mobile Companion app is designed to ensure you get the maximum
utility benefits from your Socket Mobile devices.
Scan this QR code with your
mobile device to download
our new app!
Scan this QR code with your
mobile device to download
our new app!
10
Connect Devce n Bsc Mode
In this mode the scanner functions and communicates similar to a keyboard.
Therefore, the scanner will work with Notes, and any other application that
supports an active cursor.
1. Power on the scanner. Make sure the scanner is discoverable (unpaired and
Bluetooth LED blinking).
2. Go to Settings > Bluetooth.
3. Make sure the Bluetooth is “On” and scan for devices.
4. In the list of found devices, tap S8xx [xxxxxx] to Pair.
5. The scanner will connect to the host device.
6. The scanner will beep once after it has connected.
*If you have trouble connecting or pairing with host device, turn host device’s
Bluetooh off/on, and/or perform factory reset on the scanner (see page 16).
Now you are ready to scan barcodes!
Basic Mode
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Lector de código de barras de Socket
Socket
Socket DURASCAN D750 Manual
Socket
Socket CHS Series 7 Manual de usuario
Socket
Socket SocketScan S700 Manual de usuario
Socket
Socket S740 Manual de usuario
Socket
Socket DuraSled DS800 Series Manual de usuario
Socket
Socket CHS Series 7 Manual de usuario
Socket
Socket CHS Series 7 Manual de usuario
Socket
Socket CHS 7Ci Manual de usuario
Socket
Socket 7Qi Manual de usuario
Socket
Socket SocketScan 800 Series Manual de usuario
Socket
Socket CHS Series 7 Manual de usuario
Socket
Socket In-Hand Scan Card Manual de usuario
Socket
Socket 9M Manual de usuario
Socket
Socket DURASCAN D760 Instrucciones de funcionamiento
Socket
Socket CHS 7Ci Manual de usuario
Socket
Socket CHS Series 7 Manual de usuario
Socket
Socket CHS 7Ci Manual de usuario
Socket
Socket CompactFlash Scan Card Series 5 Manual de usuario
Socket
Socket SOCKETSCAN 800 Series Manual de usuario
Socket
Socket 6410-00233 Manual de usuario
