Socket CF RFID Manual de usuario
CF RFID Reader Card™
CF RFID Reader-Scan Card™
Series 6
User’s Guide
10/2008 Document # 6410-00266 H
Copyright Notice
Copyright © 2008 Socket Mobile, Inc. All rights reserved.
Socket, the Socket logo and Mobility Friendly are registered
trademarks of Socket Mobile, Inc. CF RFID Reader Card, CF RFID
Reader-Scan Card, SoMo, RFID Demo, SocketScan, and
SocketScan Trigger are registered trademarks or trademarks of
Socket Mobile, Inc. All other brand and product names are
trademarks of their respective holders.
The CF RFID Reader Card and CF RFID Reader-Scan Card contains
technology licensed under United States Patent No. 5,902,991
and 7,003,627.
Reproduction of the contents of this manual without the
permission of Socket Mobile is expressly prohibited. Please be
aware that the products described in this manual may change
without notice.
Feel free to contact Socket Mobile at:
Socket Mobile, Inc.
39700 Eureka Drive
Newark, CA 94560-4808
USA
Other than the above, Socket Mobile can assume no
responsibility for anything resulting from the application of
information contained in this manual.
Please refrain from any applications of the CF RFID Reader Card
or CF RFID Reader-Scan Card that are not described in this
manual. Please refrain from disassembling the device.
Disassembly of this device will void the product warranty.
You can track new product releases, software updates and
technical bulletins by visiting the Socket Mobile website at:
www.socketmobile.com.
Table of Contents
1 | INTRODUCTION 4
About the Software 4
Package Contents 5
System Compatibility Requirements 5
Accessories 5
Product Registration 6
2 | SETUP FOR WINDOWS MOBILE 7
STEP 1: Uninstall Other Scanning Software 8
STEP 2: Install the Software 9
STEP 3: Assign Trigger Button(s) 11
STEP 4: Start SocketScan 13
STEP 5: Insert the Card 14
STEP 6: Verify Card Mode 15
STEP 7: Open Application 15
STEP 8: Read Data 16
RFID Settings 19
Symbology Selector 22
SocketScan Trigger 23
Dual Device Support 25
3 | RFID DEMO 26
Read an RFID Tag 27
Enable Inventory and Loop Modes 29
Select Tag Type 30
ADVANCED: Write to Tag 31
APPENDICES
A PRODUCT SPECIFICATIONS 34
B HF RFID STANDARDS AND TAG DESCRIPTIONS 36
C BAR CODE LABEL SPECIFICATIONS 45
D CLASS 1 VS. CLASS 2 LASER SCANNERS 46
E ENABLING OR DISABLING SYMBOLOGIES 49
F LASER DECODE ZONE 51
G TROUBLESHOOTING 53
H TECHNICAL SUPPORT 54
LIMITED WARRANTY 55
REGULATORY COMPLIANCE 57
3
1 | Introduction
Now you can add high frequency RFID
read/write capability to your Windows Mobile
based data collection application with the CF
RFID Reader Card Series 6. The series includes
the dual function CF RFID Reader-Card 6M and
6P, which offer both RFID and linear bar code
scanning functionality. All three versions read
and write to all ISO 15693 and many
proprietary 13.56 MHz RFID tags.
The CF RFID Reader Card Series 6 includes three versions:
•CF RFID Reader Card 6E: CompactFlash RFID Reader/Writer
•CF RFID Reader-Scan Card 6M: CompactFlash dual-function
RFID Reader/Writer and Class 1 laser bar code scanner
•CF RFID Reader-Scan Card 6P: CompactFlash dual-function
RFID Reader/Writer and Class 2 laser bar code scanner
The CF RFID Reader Cards feature a sleek designed with no
cables or batteries – they draw minimal power from the Pocket
PC. Plus, the card is designed to withstand repeated three-foot
drops to concrete – even when inserted into the Pocket PC.
About the Software
SocketScan™ software enters the RFID tag ID or bar
coded data directly into any open Windows
program, as if the data were manually typed. You
can configure various settings, like Prefix/Suffix,
symbologies, etc.
The RFID Setup utility allows you configure what kinds
of data are returned after reading RFID tags, including
tag ID, tag memory, tag types, tag type prefix, etc.
Socket RFID Demo allows you to read memory blocks
of selected RFID tags in range in either Inventory
4
Mode or a continuous Loop Mode. Advanced users
can write data to the RFID memory.
SocketScan Trigger places a software trigger on your
screen that you can tap to trigger the RFID reader or
bar code scanner. Installation is optional.
The Socket Trigger Select program allows you to
press a button to quickly switch between the RFID
and laser scanning modes of the CF RFID Reader-
Scan Card.
The Read Bar Code program allows you to assign a
button on your device to triggering the bar code
laser scanner.
The Read RFID program allows you to assign a
button on your device to trigger the RFID reader.
For software updates, visit: www.socketmobile.com/support/downloads
Package Contents
•CF RFID Reader Card
•Extra rubber collar for use with non SoMo devices
•SocketScan Installation CD
•Booklet with copyright and warranty information
System Compatibility Requirements
•Any of the following Windows Mobile versions:
−Windows Mobile 2003, 2003SE or 5.0 for Pocket PC
−Windows Mobile 6.0/6.1 Classic
•Available CompactFlash slot
•Software installation requires a host PC with the appropriate
synchronization software (ActiveSync or Windows Mobile
Device Center), both available from the Microsoft website
Accessories
If you plan to use the CF RFID Reader Card with the Socket SoMo
650 handheld computer, Socket offers a FlexGuard silicone cover
that protects both the RFID reader and the handheld computer.
For more information, please visit:
www.socketmobile.com/products/accessories
CHAPTER 1: INTRODUCTION 5
6
Product Registration
Socket highly recommends that all customers register their
products. Registered users receive priority for technical support
and can choose to receive product updates, and special offers.
Register online at: www.socketmobile.com/support/support/new.
2 | Setup for Windows Mobile
This chapter shows how to install, configure, and
use the CF RFID Reader Card Series 6 on a device
running Windows Mobile.
Setup Summary
STEP 1: Uninstall other scanning software.
STEP 2: Install the software.
STEP 3: Insert the card.
STEP 4: Start SocketScan.
STEP 5: Assign a trigger button.
STEP 6: Read tag IDs into a Windows program.
Application Features
RFID settings
Symbology selector
SocketScan Trigger.
Version information.
Note: The Socket SoMo 650 handheld computer comes pre-
loaded with the SocketScan software suite, so steps 1 and 2 are
not required. The SocketScan software pre-loaded on the SoMo
650 cannot be uninstalled but can be upgraded.
CHAPTER 2: SETUP FOR WINDOWS MOBILE 7
STEP 1: Uninstall Other Scanning Software
Uninstall any bar code scanning software already in your
computer, including previous versions of SocketScan™ software.
SoMo 650: The pre-installed SocketScan software cannot be
uninstalled, but it can be upgraded.
1. Make sure the software is not running.
2. Tap Start | Settings | System tab | Remove Programs.
3. Use the utility to delete the software.
8
STEP 2: Install the Software
ADVANCED USERS: Refer to the README file for CAB file
installation instructions..
Note: If you are using the SoMo 650, software installation is not
necessary. SocketScan is pre-loaded on the device.
Follow these instructions to install SocketScan. Afterwards, you
can use the same process to install RFID Demo and/or Floating
Trigger.
4. Use a serial/USB cable or cradle and the appropriate Microsoft
synchronization software to make an active connection
between your device and a host PC.
5. Insert the installation CD into your host PC.
6. Use My Computer or Windows Explorer to access your CD-
ROM drive. In the CD, click on SETUP.EXE.
7. The SocketScan Setup Center will appear in your web browser.
Read the first page and click Installation in the left margin.
8. In the SocketScan Installation page, in the Windows CE
section, click Install In the first paragraph.
CHAPTER 2: SETUP FOR WINDOWS MOBILE 9
9. Your web browser will present a series of dialogs.
Internet Explorer:
•In the File Download –Security Warning dialog, click Run.
•In the second warning dialog, click Run.
•Internet Explorer will download the file.
Firefox:
•In the file opening dialog, click Save File.
•Firefox will download the file.
•In the Downloads list, next to SocketScanCE.exe, click Open.
•In the warning dialog, click OK to continue.
10.The InstallShield Wizard for SocketScan Software will
automatically launch. Follow the wizard to install the software.
11.If your device warns that the software comes from an
unknown publisher, tap Yes to continue installation.
12.When software installation is complete, remove the device
from the cradle. Soft reset the device by pressing the reset
button.
Note: After software installation, several new icons will appear in
the Programs screen.
10
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Lector de código de barras de Socket
Socket
Socket Wand Scanner 2E Manual de usuario
Socket
Socket CHS 7Qi Manual de usuario
Socket
Socket CHS 7Ci Manual de usuario
Socket
Socket CHS Series 7 Guía de solución de problemas
Socket
Socket DURACASE 800 Series Manual de usuario
Socket
Socket CHS 7Mi Manual de usuario
Socket
Socket CompactFlash Scan Card Series 5 Manual de usuario
Socket
Socket 7Qi Manual de usuario
Socket
Socket CHS 7Ci Manual de usuario
Socket
Socket CX2895-1508 Manual de usuario
Socket
Socket CHS 7M Manual de usuario
Socket
Socket CHS 7Ci Manual de usuario
Socket
Socket DuraScan 700 Series Manual de usuario
Socket
Socket SOCKETSCAN S800 Manual de usuario
Socket
Socket CHS Series 7 Manual de usuario
Socket
Socket CHS Series 7 Manual de usuario
Socket
Socket 2DSC 5 series Manual de usuario
Socket
Socket 800 SERIES Manual de usuario
Socket
Socket SocketScan S700 Manual de usuario
Socket
Socket DURASCAN Series Manual de usuario
